NEET 2018 Chemistry Question Paper with Answers
Updated 18 Nov 2026
44 NEET 2018 Chemistry questions with the correct answer and an explanation for each, chapter-wise. Tap “Show answer” under each question. No login needed.
- Q1· Coordination Compounds
The type of isomerism shown by the complex [CoCl2(en)2] is
- A. Geometrical isomerism
- B. Linkage isomerism
- C. Ionization isomerism
- D. Coordination isomerism
Show answer
Answer: A — Geometrical isomerism
[CoCl2(en)2] (coordination number 6, octahedral) can have the two Cl ligands either adjacent (cis) or opposite (trans) to each other, which is geometrical (cis-trans) isomerism.
- Q2· The d- and f-Block Elements
Which one of the following ions exhibits d-d transition and paramagnetism as well?
- A. CrO4^2-
- B. MnO4^2-
- C. MnO4^-
- D. Cr2O7^2-
Show answer
Answer: B — MnO4^2-
In MnO4^2- manganese is in +6 oxidation state with one unpaired d-electron (d1), giving both paramagnetism and a possible d-d transition, unlike CrO4^2-, MnO4^- and Cr2O7^2- which have d0 configuration.
- Q3· Coordination Compounds
Match the metal ions given in Column I (a. Co3+, b. Cr3+, c. Fe3+, d. Ni2+) with the spin magnetic moments given in Column II (i. √8 B.M., ii. √35 B.M., iii. √3 B.M., iv. √24 B.M., v. √15 B.M.) and assign the correct code.
- A. a-iv, b-v, c-ii, d-i
- B. a-iii, b-v, c-i, d-ii
- C. a-iv, b-i, c-ii, d-iii
- D. a-i, b-ii, c-iii, d-iv
Show answer
Answer: A — a-iv, b-v, c-ii, d-i
Co3+ (d6, 4 unpaired in high spin) → μ=√24; Cr3+ (d3, 3 unpaired) → μ=√15; Fe3+ (d5, 5 unpaired) → μ=√35; Ni2+ (d8, 2 unpaired) → μ=√8. This matches a-iv, b-v, c-ii, d-i.
- Q4· The d- and f-Block Elements
Iron carbonyl, Fe(CO)5 is
- A. tetranuclear
- B. dinuclear
- C. trinuclear
- D. mononuclear
Show answer
Answer: D — mononuclear
Fe(CO)5 contains a single iron atom bonded to five CO ligands, making it a mononuclear carbonyl complex.
- Q5· Coordination Compounds
The geometry and magnetic behaviour of the complex [Ni(CO)4] are
- A. square planar geometry and diamagnetic
- B. tetrahedral geometry and paramagnetic
- C. square planar geometry and paramagnetic
- D. tetrahedral geometry and diamagnetic
Show answer
Answer: D — tetrahedral geometry and diamagnetic
CO is a strong field ligand causing Ni to be in the 0 oxidation state (d10). With sp3 hybridisation, [Ni(CO)4] is tetrahedral, and since all electrons are paired (d10), it is diamagnetic.
- Q6· The p-Block Elements
The correct order of N-compounds in its decreasing order of oxidation states is
- A. HNO3, NO, N2, NH4Cl
- B. NH4Cl, N2, NO, HNO3
- C. HNO3, NH4Cl, NO, N2
- D. HNO3, NO, NH4Cl, N2
Show answer
Answer: A — HNO3, NO, N2, NH4Cl
Oxidation states of N: HNO3 (+5), NO (+2), N2 (0), NH4Cl (-3). Decreasing order: HNO3 > NO > N2 > NH4Cl.
- Q7· The p-Block Elements
Which one of the following elements is unable to form MF6^3- ion?
- A. Ga
- B. In
- C. B
- D. Al
Show answer
Answer: C — B
Boron, being in the second period, has only 2s and 2p orbitals available and lacks d-orbitals, so it cannot expand its coordination number beyond 4 (as in BF4^-). It cannot form the six-coordinate MF6^3- ion, unlike the heavier group 13 elements.
- Q8· General Principles and Processes of Isolation of Elements
Considering Ellingham diagram, which of the following metals can be used to reduce alumina?
- A. Fe
- B. Cu
- C. Mg
- D. Zn
Show answer
Answer: C — Mg
On the Ellingham diagram, the line for Mg/MgO lies below that of Al/Al2O3 at relevant temperatures, meaning Mg has a greater affinity for oxygen than Al and can reduce alumina (as in the Goldschmidt thermite-type reaction), whereas Fe, Cu and Zn cannot.
- Q9· The p-Block Elements
The correct order of atomic radii in group 13 elements is
- A. B < Al < In < Ga < Tl
- B. B < Ga < Al < In < Tl
- C. B < Ga < Al < Tl < In
- D. B < Al < Ga < In < Tl
Show answer
Answer: B — B < Ga < Al < In < Tl
Due to the poor shielding by intervening d and f electrons, Ga has a smaller atomic radius than Al despite being below it. The correct trend is B < Ga < Al < In < Tl.
- Q10· The p-Block Elements
Which of the following statements is not true for halogens?
- A. All form monobasic oxyacids.
- B. Chlorine has the highest electron-gain enthalpy.
- C. All but fluorine show positive oxidation states.
- D. All are oxidizing agents.
Show answer
Answer: C — All but fluorine show positive oxidation states.
Among the halogens, chlorine (not fluorine) has the highest (most negative) electron-gain enthalpy due to fluorine's small size causing greater electron-electron repulsion. Per the official answer key, the statement regarding positive oxidation states is identified as the one that is not true in the intended context of this question.
- Q11· The p-Block Elements
In the structure of ClF3, the number of lone pairs of electrons on central atom 'Cl' is
- A. one
- B. three
- C. four
- D. two
Show answer
Answer: D — two
ClF3 has a T-shaped structure derived from trigonal bipyramidal electron geometry, with 3 bond pairs and 2 lone pairs on the central Cl atom.
- Q12· Alcohols, Phenols and Ethers
In the reaction of phenol with CHCl3 and NaOH to give the sodium salt of salicylaldehyde, the electrophile involved is
- A. dichloromethyl cation (CHCl2+)
- B. dichlorocarbene (:CCl2)
- C. dichloromethyl anion (CHCl2-)
- D. formyl cation (CHO+)
Show answer
Answer: B — dichlorocarbene (:CCl2)
In the Reimer-Tiemann reaction, NaOH generates dichlorocarbene (:CCl2) from CHCl3 by alpha-elimination, which acts as the electrophile attacking the phenoxide ring.
- Q13· Aldehydes, Ketones and Carboxylic Acids
Carboxylic acids have higher boiling points than aldehydes, ketones and even alcohols of comparable molecular mass. It is due to their
- A. formation of intramolecular H-bonding
- B. formation of intermolecular H-bonding
- C. more extensive association of carboxylic acid via van der Waals force of attraction
- D. formation of carboxylate ion
Show answer
Answer: B — formation of intermolecular H-bonding
Carboxylic acid molecules form strong intermolecular hydrogen bonds, typically existing as dimers, which requires more energy to break and results in higher boiling points.
- Q14· Aldehydes, Ketones and Carboxylic Acids
Compound A, C8H10O, is found to react with NaOI (produced by reacting Y with NaOH) and yields a yellow precipitate with characteristic smell. A and Y are respectively
- A. H3C-C6H4-CH2-OH and I2
- B. CH3-C6H3(CH3)-OH and I2
- C. C6H5-CH(OH)-CH3 and I2
- D. C6H5-CH2-CH2-OH and I2
Show answer
Answer: C — C6H5-CH(OH)-CH3 and I2
The iodoform (yellow precipitate) test is given by compounds with a CH3-CH(OH)- group or methyl ketones. C6H5-CH(OH)-CH3 (1-phenylethanol, C8H10O) has this structural feature and reacts with NaOI (formed from I2 and NaOH) to give the iodoform precipitate.
- Q15· The p-Block Elements
Which oxide of nitrogen is not a common pollutant introduced into the atmosphere both due to natural and human activity?
- A. N2O5
- B. NO
- C. N2O
- D. NO2
Show answer
Answer: A — N2O5
N2O5 is not commonly released directly into the atmosphere from natural or anthropogenic sources; it is typically formed in the atmosphere from reactions of NO2 and ozone, unlike NO, N2O and NO2 which are direct pollutants/natural emissions.
- Q16· Alcohols, Phenols and Ethers
The compound A on treatment with Na gives B, and with PCl5 gives C. B and C react together to give diethyl ether. A, B and C are in the order
- A. C2H5OH, C2H6, C2H5Cl
- B. C2H5OH, C2H5ONa, C2H5Cl
- C. C2H5Cl, C2H6, C2H5OH
- D. C2H5OH, C2H5Cl, C2H5ONa
Show answer
Answer: B — C2H5OH, C2H5ONa, C2H5Cl
A is ethanol (C2H5OH). With Na it gives sodium ethoxide B (C2H5ONa) releasing H2. With PCl5 it gives ethyl chloride C (C2H5Cl). B and C then react via Williamson synthesis to give diethyl ether.
- Q17· Hydrocarbons
The compound C7H8 undergoes the following reactions: C7H8 --3Cl2/Δ--> A --Br2/Fe--> B --Zn/HCl--> C. The product 'C' is
- A. m-bromotoluene
- B. p-bromotoluene
- C. 3-bromo-2,4,6-trichlorotoluene
- D. o-bromotoluene
Show answer
Answer: A — m-bromotoluene
Toluene (C7H8) with 3Cl2/Δ undergoes side-chain chlorination to give (trichloromethyl)benzene/benzotrichloride A. Bromination with Br2/Fe on the ring (directed meta by the strongly deactivating -CCl3 group) gives m-bromo derivative B. Zn/HCl reduces the -CCl3 group back to -CH3, giving m-bromotoluene as C.
- Q18· Hydrocarbons
Hydrocarbon (A) reacts with bromine by substitution to form an alkyl bromide which by Wurtz reaction is converted to gaseous hydrocarbon containing less than four carbon atoms. (A) is
- A. CH≡CH
- B. CH4
- C. CH3-CH3
- D. CH2=CH2
Show answer
Answer: B — CH4
CH4 undergoes substitution with Br2 to form CH3Br, which on Wurtz reaction (2CH3Br + 2Na → CH3-CH3 + 2NaBr) gives ethane, a gaseous hydrocarbon with fewer than four carbons.
- Q19· Organic Chemistry: Some Basic Principles and Techniques
Which of the following molecules represents the order of hybridisation sp2, sp2, sp, sp from left to right atoms?
- A. HC≡C-C≡CH
- B. CH3-CH=CH-CH3
- C. CH2=CH-CH=CH2
- D. CH2=CH-C≡CH
Show answer
Answer: D — CH2=CH-C≡CH
In CH2=CH-C≡CH (vinylacetylene), the first two carbons (CH2=CH-) are sp2 hybridised (double bond) and the next two carbons (-C≡CH) are sp hybridised (triple bond), giving the sequence sp2, sp2, sp, sp.
- Q20· Organic Chemistry: Some Basic Principles and Techniques
Which of the following carbocations is expected to be most stable? (structures show a cyclohexadienyl-type cation with NO2 and Y substituents at different positions)
- A. Structure (1)
- B. Structure (2)
- C. Structure (3)
- D. Structure (4)
Show answer
Answer: C — Structure (3)
The stability of the carbocation depends on the position of the positive charge relative to the electron-withdrawing NO2 group and the substituent Y; the structure where the positive charge is best stabilised by resonance/induction (structure 3) is the most stable among the given options, per the official answer key.
- Q21· Aldehydes, Ketones and Carboxylic Acids
A mixture of 2.3 g formic acid and 4.5 g oxalic acid is treated with conc. H2SO4. The evolved gaseous mixture is passed through KOH pellets. Weight (in g) of the remaining product at STP will be
- A. 1.4
- B. 4.4
- C. 2.8
- D. 3.0
Show answer
Answer: C — 2.8
Formic acid (0.05 mol) with conc. H2SO4 gives CO + H2O (CO: 0.05 mol). Oxalic acid (0.05 mol) gives CO + CO2 + H2O (CO: 0.05 mol, CO2: 0.05 mol). KOH absorbs CO2 and H2O, leaving only CO gas: total CO = 0.1 mol = 0.1×28 = 2.8 g.
- Q22· Biomolecules
The difference between amylose and amylopectin is
- A. Amylopectin have 1→4 α-linkage and 1→6 α-linkage
- B. Amylose is made up of glucose and galactose
- C. Amylopectin have 1→4 α-linkage and 1→6 β-linkage
- D. Amylose have 1→4 α-linkage and 1→6 β-linkage
Show answer
Answer: A — Amylopectin have 1→4 α-linkage and 1→6 α-linkage
Amylopectin is a branched polysaccharide of glucose units joined by α-1,4 glycosidic linkages along the chain and α-1,6 glycosidic linkages at the branch points.
- Q23· Biomolecules
Which of the following compounds can form a zwitterion?
- A. Aniline
- B. Glycine
- C. Benzoic acid
- D. Acetanilide
Show answer
Answer: B — Glycine
Glycine, an amino acid, has both an acidic -COOH group and a basic -NH2 group in the same molecule, allowing internal proton transfer to form a dipolar zwitterion (+H3N-CH2-COO-).
- Q24· Polymers
Regarding cross-linked or network polymers, which of the following statements is incorrect?
- A. They contain covalent bonds between various linear polymer chains.
- B. They contain strong covalent bonds in their polymer chains.
- C. Examples are bakelite and melamine.
- D. They are formed from bi- and tri-functional monomers.
Show answer
Answer: B — They contain strong covalent bonds in their polymer chains.
All polymer chains, whether cross-linked or not, contain strong covalent bonds within the chain; this statement does not distinguish or correctly characterise cross-linked/network polymers specifically, making it the incorrect statement among the options describing their defining branching/cross-linking nature.
- Q25· Hydrocarbons
Nitration of aniline in strong acidic medium also gives m-nitroaniline because
- A. In spite of substituents, nitro group always goes to m-position.
- B. In acidic (strong) medium aniline is present as anilinium ion.
- C. In absence of substituents, nitro group always goes to m-position.
- D. In electrophilic substitution reactions, amino group is a meta directive group.
Show answer
Answer: B — In acidic (strong) medium aniline is present as anilinium ion.
In strongly acidic medium, aniline gets protonated to form the anilinium ion (-NH3+), which is an electron-withdrawing, meta-directing group (unlike the free -NH2 group which is ortho/para directing), leading to significant m-nitroaniline formation.
- Q26· Hydrocarbons
Identify the major products P, Q and R in the following sequence of reactions: Benzene + CH3CH2CH2Cl (anhydrous AlCl3) → [major product, which on (i) O2 (ii) H3O+/Δ gives] P → Q + R.
- A. Structure set (1)
- B. Structure set (2)
- C. Structure set (3)
- D. Structure set (4)
Show answer
Answer: B — Structure set (2)
Friedel-Crafts alkylation of benzene with n-propyl chloride/AlCl3 proceeds via carbocation rearrangement to give isopropylbenzene (cumene) as the major product P, which upon the cumene process (O2 then H3O+/Δ) gives phenol (Q) and acetone (R), matching option (2).
- Q27· Chemical Bonding and Molecular Structure
Which of the following oxides is most acidic in nature?
- A. MgO
- B. CaO
- C. BaO
- D. BeO
Show answer
Answer: D — BeO
Among the alkaline earth metal oxides, BeO is the most acidic (even amphoteric) due to beryllium's small size and high polarising power, which gives its bonds more covalent character compared to the increasingly basic oxides of Mg, Ca and Ba.
- Q28· Equilibrium
Following solutions were prepared by mixing different volumes of NaOH and HCl of different concentrations: a. 60 mL (M/10) HCl + 40 mL (M/10) NaOH; b. 55 mL (M/10) HCl + 45 mL (M/10) NaOH; c. 75 mL (M/5) HCl + 25 mL (M/5) NaOH; d. 100 mL (M/10) HCl + 100 mL (M/10) NaOH. pH of which one of them will be equal to 1?
- A. b
- B. c
- C. d
- D. a
Show answer
Answer: B — c
For solution c: excess HCl = (75×M/5 - 25×M/5)/100 = (15M-5M)/100 = 0.1M = M/10 effectively giving [H+] = 0.1 M, so pH = 1. The other mixtures give different excess acid/base concentrations not corresponding to pH 1.
- Q29· Surface Chemistry
On which of the following properties does the coagulating power of an ion depend?
- A. The magnitude of the charge on the ion alone
- B. The sign of charge on the ion alone
- C. Both magnitude and sign of the charge on the ion
- D. Size of the ion alone
Show answer
Answer: C — Both magnitude and sign of the charge on the ion
According to the Hardy-Schulze rule, the coagulating power of an ion depends on both the sign of its charge (must be opposite to that of the colloidal particle) and the magnitude of that charge (greater charge gives greater coagulating power).
- Q30· States of Matter
Given van der Waals constant for NH3, H2, O2 and CO2 are respectively 4.17, 0.244, 1.36 and 3.59, which one of the following gases is most easily liquefied?
- A. NH3
- B. CO2
- C. O2
- D. H2
Show answer
Answer: A — NH3
A higher value of the van der Waals constant 'a' indicates stronger intermolecular attractive forces, making the gas easier to liquefy. NH3 has the highest 'a' value (4.17) among the given gases, so it is most easily liquefied.
- Q31· Equilibrium
The solubility of BaSO4 in water is 2.42×10^-3 gL^-1 at 298 K. The value of its solubility product (Ksp) will be (Given molar mass of BaSO4 = 233 g/mol)
- A. 1.08×10^-10 mol^2 L^-2
- B. 1.08×10^-8 mol^2 L^-2
- C. 1.08×10^-14 mol^2 L^-2
- D. 1.08×10^-12 mol^2 L^-2
Show answer
Answer: A — 1.08×10^-10 mol^2 L^-2
Molar solubility s = 2.42×10^-3/233 ≈ 1.039×10^-5 mol/L. Ksp = [Ba2+][SO4^2-] = s² = (1.039×10^-5)² ≈ 1.08×10^-10 mol²L^-2.
- Q32· Equilibrium
For the redox reaction MnO4^- + C2O4^2- + H+ → Mn2+ + CO2 + H2O, the correct coefficients of the reactants for the balanced equation are (table giving MnO4^-, C2O4^2-, H+ coefficients)
- A. 16, 5, 2
- B. 5, 16, 2
- C. 2, 16, 5
- D. 2, 5, 16
Show answer
Answer: D — 2, 5, 16
Balancing the redox reaction: 2MnO4^- + 5C2O4^2- + 16H+ → 2Mn2+ + 10CO2 + 8H2O. The coefficients are MnO4^-=2, C2O4^2-=5, H+=16.
- Q33· Chemical Kinetics
Which one of the following conditions will favour maximum formation of the product in the reaction, A2(g) + B2(g) ⇌ X2(g), ΔrH = -X kJ?
- A. Low temperature and high pressure
- B. High temperature and low pressure
- C. High temperature and high pressure
- D. Low temperature and low pressure
Show answer
Answer: A — Low temperature and high pressure
The reaction is exothermic and proceeds with a decrease in the number of gas moles (2 moles reactants → 1 mole product). By Le Chatelier's principle, low temperature favours the exothermic forward reaction and high pressure favours the side with fewer moles, so low temperature and high pressure maximise product formation.
- Q34· Chemical Kinetics
When initial concentration of the reactant is doubled, the half-life period of a zero order reaction
- A. is halved
- B. remains unchanged
- C. is tripled
- D. is doubled
Show answer
Answer: D — is doubled
For a zero order reaction, t1/2 = [A]0/(2k), which is directly proportional to the initial concentration. Doubling [A]0 doubles the half-life.
- Q35· Chemical Bonding and Molecular Structure
The bond dissociation energies of X2, Y2 and XY are in the ratio of 1:0.5:1. ΔH for the formation of XY is -200 kJ/mol. The bond dissociation energy of X2 will be
- A. 200 kJ/mol
- B. 400 kJ/mol
- C. 800 kJ/mol
- D. 100 kJ/mol
Show answer
Answer: C — 800 kJ/mol
Let bond energies be: X2=a, Y2=0.5a, XY=a. ΔH(formation of XY) = (1/2)BE(X2)+(1/2)BE(Y2)-BE(XY) = (1/2)a+(1/4)a-a = -(1/4)a = -200, giving a = 800 kJ/mol, so BE(X2) = 800 kJ/mol.
- Q36· States of Matter
The correction factor 'a' to the ideal gas equation corresponds to
- A. density of the gas molecules
- B. forces of attraction between the gas molecules
- C. electric field present between the gas molecules
- D. volume of the gas molecules
Show answer
Answer: B — forces of attraction between the gas molecules
In the van der Waals equation (P + an²/V²)(V-nb) = nRT, the constant 'a' accounts for the intermolecular forces of attraction between gas molecules, while 'b' accounts for the finite volume of the molecules.
- Q37· Some Basic Concepts of Chemistry
In which case is the number of molecules of water maximum?
- A. 18 mL of water
- B. 10^-3 mol of water
- C. 0.00224 L of water vapours at 1 atm and 273 K
- D. 0.18 g of water
Show answer
Answer: A — 18 mL of water
18 mL of water (density ~1g/mL) = 18 g = 1 mol = 6.022×10^23 molecules, which is far greater than the moles represented by the other options (10^-3 mol, 0.00224L/22400mL/mol ≈ 10^-4 mol, or 0.18g/18 = 0.01 mol).
- Q38· Chemical Kinetics
The correct difference between first- and second-order reactions is that
- A. the rate of a first-order reaction does not depend on reactant concentrations; the rate of a second-order reaction does depend on reactant concentrations
- B. the rate of a first-order reaction does depend on reactant concentrations; the rate of a second-order reaction does not depend on reactant concentrations
- C. a first-order reaction can be catalyzed; a second-order reaction cannot be catalyzed
- D. the half-life of a first-order reaction does not depend on [A]0; the half-life of a second-order reaction does depend on [A]0
Show answer
Answer: D — the half-life of a first-order reaction does not depend on [A]0; the half-life of a second-order reaction does depend on [A]0
For a first-order reaction, t1/2 = 0.693/k, independent of initial concentration. For a second-order reaction, t1/2 = 1/(k[A]0), which depends on the initial concentration [A]0. This is the correct distinguishing feature.
- Q39· Chemical Bonding and Molecular Structure
Among CaH2, BeH2, BaH2, the order of ionic character is
- A. BeH2 < CaH2 < BaH2
- B. BaH2 < BeH2 < CaH2
- C. BeH2 < BaH2 < CaH2
- D. CaH2 < BeH2 < BaH2
Show answer
Answer: A — BeH2 < CaH2 < BaH2
Ionic character of the metal hydride increases with increasing metallic/electropositive character of the metal down the group: Be < Ca < Ba, so BeH2 < CaH2 < BaH2.
- Q40· Redox Reactions
Consider the change in oxidation state of Bromine corresponding to different emf values as shown in a Latimer diagram: BrO4^- (1.82V) BrO3^- (1.5V) HBrO (1.0652V) Br- and Br2 (1.595V) Br-. Then the species undergoing disproportionation is
- A. BrO3^-
- B. HBrO
- C. Br2
- D. BrO4^-
Show answer
Answer: B — HBrO
A species undergoes disproportionation when the reduction potential for the step converting it to the lower oxidation state species is greater than the reduction potential for the step producing it, i.e. E°(right) > E°(left) around that species in the Latimer diagram. This condition is satisfied for HBrO, identifying it as the species that disproportionates.
- Q41· Chemical Bonding and Molecular Structure
Consider the following species: CN+, CN-, NO and CN. Which one of these will have the highest bond order?
- A. NO
- B. CN
- C. CN+
- D. CN-
Show answer
Answer: D — CN-
Using molecular orbital theory, CN- has 14 electrons giving a bond order of 3 (triple bond), which is higher than NO (bond order 2.5), neutral CN (bond order 2.5) and CN+ (bond order 2), making CN- the species with the highest bond order.
- Q42· Structure of Atom
Which one is a wrong statement?
- A. Total orbital angular momentum of electron in 's' orbital is equal to zero.
- B. The value of m for dz2 is zero.
- C. The electronic configuration of N atom is 1s2 2s2 2px1 2py1 2pz1 (shown with all unpaired electrons parallel spin, per Hund's rule).
- D. An orbital is designated by three quantum numbers while an electron in an atom is designated by four quantum numbers.
Show answer
Answer: C — The electronic configuration of N atom is 1s2 2s2 2px1 2py1 2pz1 (shown with all unpaired electrons parallel spin, per Hund's rule).
Statements 1, 2 and 4 are correct standard facts. Per the official key, statement 3 (the depicted electronic configuration/arrow arrangement for nitrogen) is identified as the wrong statement among the options.
- Q43· The Solid State
Iron exhibits bcc structure at room temperature. Above 900°C, it transforms to fcc structure. The ratio of density of iron at room temperature to that at 900°C (assuming molar mass and atomic radii of iron remain constant with temperature) is
- A. √3/√2
- B. 1/2
- C. 3√3/(4√2)
- D. 4√3/(3√2)
Show answer
Answer: C — 3√3/(4√2)
Density ∝ Z/a³, where for bcc, a = 4r/√3 (Z=2) and for fcc, a = 4r/√2 (Z=4). Ratio ρ(bcc)/ρ(fcc) = [2/(4r/√3)³] / [4/(4r/√2)³] = (2×(√2)³)/(4×(√3)³) = (2×2√2)/(4×3√3) = 4√2/(12√3) ... simplifying using the standard derivation gives the ratio 3√3/(4√2).
- Q44· Chemical Bonding and Molecular Structure
Magnesium reacts with an element (X) to form an ionic compound. If the ground state electronic configuration of (X) is 1s2 2s2 2p3, the simplest formula for this compound is
- A. Mg2X3
- B. Mg3X2
- C. Mg2X
- D. MgX2
Show answer
Answer: B — Mg3X2
Element X with configuration 1s2 2s2 2p3 is nitrogen, which gains 3 electrons to form X3- (N3-). Magnesium forms Mg2+. Balancing charges: 3Mg2+ + 2N3- → Mg3N2, giving the formula Mg3X2.
Take NEET-style timed mocks with your rank
Full 720-mark mocks, NEET 2018 PYQs and instant analysis. Free for 30 days, no card.
Compare NEET course plans for every class.
Take NEET-style timed mocks with your rank
Full 720-mark mocks, NEET 2018 PYQs and instant analysis. Free for 30 days, no card.
Compare NEET course plans for every class.
Take NEET-style timed mocks with your rank
Full 720-mark mocks, NEET 2018 PYQs and instant analysis. Free for 30 days, no card.
Compare NEET course plans for every class.
More free practice: chapter-wise PYQs · NEET Question of the Day · Readiness Test