NEET 2019 Chemistry Question Paper with Answers
Updated 18 Nov 2026
47 NEET 2019 Chemistry questions with the correct answer and an explanation for each, chapter-wise. Tap “Show answer” under each question. No login needed.
- Q1· Haloalkanes and Haloarenes
Which compound undergoes SN1 most readily?
- A. CH3Cl
- B. (CH3)2CHCl
- C. (CH3)3CCl
- D. CH3CH2Cl
Show answer
Answer: C — (CH3)3CCl
SN1 proceeds via carbocation intermediate. Tertiary carbocation (3°) most stable (3 alkyl groups donating electrons). Order: 3°>2°>1°>methyl.
- Q2· The p-Block Elements
Which halogen does NOT show positive oxidation states?
- A. Cl
- B. Br
- C. I
- D. F
Show answer
Answer: D — F
Fluorine (most electronegative element) CANNOT show positive oxidation states. Cl, Br, I can show +1,+3,+5,+7 in oxyacids (HOCl, HClO3, HClO4 etc.).
- Q3· Chemical Bonding and Molecular Structure
Shape of NH3 molecule is:
- A. Triangular planar
- B. Trigonal pyramidal
- C. Tetrahedral
- D. Linear
Show answer
Answer: B — Trigonal pyramidal
N in NH3: 3 bond pairs + 1 lone pair (sp³). VSEPR: lone pair repulsion makes bond angles 107.3° (less than 109.5°). Shape = trigonal pyramidal (electron geometry = tetrahedral).
- Q4· Thermodynamics
In which case is the change in entropy negative?
- A. Sublimation of solid to gas
- B. 2H(g) -> H2(g)
- C. Evaporation of water
- D. Expansion of a gas at constant temperature
Show answer
Answer: B — 2H(g) -> H2(g)
In the reaction 2H(g) -> H2(g), the number of gas particles decreases from 2 moles to 1 mole, causing a decrease in randomness/disorder, hence entropy change is negative. The other options all involve an increase in disorder (solid to gas, liquid to gas, or gas expansion), giving positive entropy change.
- Q5· Chemical Kinetics
For the chemical reaction N2(g) + 3H2(g) <=> 2NH3(g), the correct option is:
- A. -d[N2]/dt = (1/2)d[NH3]/dt
- B. 3 d[H2]/dt = 2 d[NH3]/dt
- C. -(1/3)d[H2]/dt = -(1/2)d[NH3]/dt
- D. -d[N2]/dt = 2 d[NH3]/dt
Show answer
Answer: A — -d[N2]/dt = (1/2)d[NH3]/dt
Rate r = -(1/1)d[N2]/dt = (1/3)d[H2]/dt = (1/2)d[NH3]/dt, based on dividing the rate of change of each species by its stoichiometric coefficient. This gives -d[N2]/dt = (1/2)d[NH3]/dt.
- Q6· Chemical Bonding and Molecular Structure
Which of the following diatomic molecular species has only pi bonds according to Molecular Orbital Theory?
- A. C2
- B. Be2
- C. O2
- D. N2
Show answer
Answer: A — C2
C2 has 12 electrons with configuration sigma1s^2 sigma*1s^2 sigma2s^2 sigma*2s^2 pi2px^2=pi2py^2. Bond order = (8-4)/2 = 2, and both bonds are pi bonds (the last 4 electrons are in pi2px^2 = pi2py^2 orbitals), with no sigma bond from 2p orbitals.
- Q7· The p-Block Elements
Which of the following is an incorrect statement?
- A. GeX4 (X = F, Cl, Br, I) is more stable than GeX2
- B. SnF4 is ionic in nature
- C. PbF4 is covalent in nature
- D. SiCl4 is easily hydrolysed
Show answer
Answer: C — PbF4 is covalent in nature
Due to the inert pair effect, Pb(II) is more stable than Pb(IV), and PbF4 is actually ionic in nature (not covalent) due to the large size and high charge density effects, making statement 3 the incorrect one.
- Q8· Thermodynamics
Under isothermal condition a gas at 300 K expands from 0.1 L to 0.25 L against a constant external pressure of 2 bar. The work done by the gas is: [Given that 1 L bar = 100 J]
- A. 25 J
- B. 30 J
- C. -30 J
- D. 5 kJ
Show answer
Answer: C — -30 J
w = -P_ext(V2-V1) = -2(0.25-0.1) = -2(0.15) = -0.3 L.bar = -0.3 x 100 J = -30 J.
- Q9· Alcohols, Phenols and Ethers
The compound that is most difficult to protonate is:
- A. H3C-O-CH3 (dimethyl ether)
- B. Ph-O-H (phenol)
- C. H-O-H (water)
- D. H3C-O-H (methanol)
Show answer
Answer: B — Ph-O-H (phenol)
In phenol, the lone pair on the oxygen atom is delocalised into the benzene ring through resonance, which reduces the electron density available on oxygen for protonation, making phenol the most difficult to protonate among the given options.
- Q10· The s-Block Elements
Which of the following is an amphoteric hydroxide?
- A. Mg(OH)2
- B. Be(OH)2
- C. Sr(OH)2
- D. Ca(OH)2
Show answer
Answer: B — Be(OH)2
Be(OH)2 is amphoteric because beryllium, being the smallest and most polarizing alkaline earth metal, shows diagonal relationship properties with aluminium, giving its hydroxide the ability to react with both acids and bases.
- Q11· The p-Block Elements
The correct structure of tribromooctaoxide (Br3O8) is: [Four structural options with Br-Br-Br chains and various O/O- substituents shown as Lewis structures]
- A. Structure with -O-Br-Br-Br=O chain, terminal O- groups at ends and =O, O- at middle Br
- B. Structure with O=Br-Br-Br-O- chain, with O-, =O and O-, =O substituent groups
- C. Structure with O=Br-Br-Br=O chain, terminal Br atoms each with two =O groups, middle Br with =O group
- D. Structure with O=Br-Br-Br-O- chain, with =O, O- and O-, =O substituent groups at various positions
Show answer
Answer: C — Structure with O=Br-Br-Br=O chain, terminal Br atoms each with two =O groups, middle Br with =O group
Br3O8 consists of a central Br atom singly bonded to two terminal BrO3 groups (each terminal Br bonded to three =O via resonance/structure as BrO3 units), giving the symmetrical O=Br-Br-Br=O type structure shown in option 3.
- Q12· Biomolecules
The biodegradable polymer is:
- A. nylon-6
- B. Buna-S
- C. nylon-6,6
- D. nylon 2-nylon 6
Show answer
Answer: D — nylon 2-nylon 6
Nylon-2-nylon-6 is a biodegradable polymer because it contains amide linkages similar to proteins/peptides, which can be broken down by biological processes, unlike nylon-6, nylon-6,6, or Buna-S (a synthetic rubber), which are non-biodegradable.
- Q13· Haloalkanes and Haloarenes
Among the following, the reaction that proceeds through an electrophilic substitution is: (1) Benzene + Cl2 with UV light giving hexachlorocyclohexane (2) Benzyl alcohol + HCl with heat giving benzyl chloride + water (3) Benzene diazonium chloride + Cu2Cl2 giving chlorobenzene + N2 (4) Benzene + Cl2 with AlCl3 giving chlorobenzene + HCl
- A. Reaction 1 (benzene + Cl2, UV light, addition to hexachlorocyclohexane)
- B. Reaction 2 (benzyl alcohol + HCl, heat, substitution via heat)
- C. Reaction 3 (diazonium salt + Cu2Cl2, Sandmeyer reaction)
- D. Reaction 4 (benzene + Cl2, AlCl3 catalyst, giving chlorobenzene + HCl)
Show answer
Answer: D — Reaction 4 (benzene + Cl2, AlCl3 catalyst, giving chlorobenzene + HCl)
Reaction 4 is a classic electrophilic aromatic substitution: AlCl3 acts as a Lewis acid catalyst to generate Cl+ electrophile, which substitutes a hydrogen on the benzene ring to give chlorobenzene and HCl.
- Q14· General Principles and Processes of Isolation of Elements
Match the following: (a) Pure nitrogen (b) Haber process (c) Contact process (d) Deacon's process -- with -- (i) Chlorine (ii) Sulphuric acid (iii) Ammonia (iv) Sodium azide or Barium azide. Which of the following is the correct option?
- A. a-iii, b-iv, c-ii, d-i
- B. a-iv, b-iii, c-ii, d-i
- C. a-i, b-ii, c-iii, d-iv
- D. a-ii, b-iv, c-i, d-iii
Show answer
Answer: B — a-iv, b-iii, c-ii, d-i
Pure nitrogen is obtained from thermal decomposition of sodium azide or barium azide (a-iv). The Haber process produces ammonia (b-iii). The Contact process produces sulphuric acid (c-ii). Deacon's process produces chlorine (d-i).
- Q15· Organic Chemistry: Some Basic Principles and Techniques
The number of sigma and pi bonds in pent-2-en-4-yne (CH3-CH=CH-C=CH, with a triple bond between C4 and C5) is:
- A. 11 sigma bonds and 2 pi bonds
- B. 13 sigma bonds and no pi bond
- C. 10 sigma bonds and 3 pi bonds
- D. 8 sigma bonds and 5 pi bonds
Show answer
Answer: C — 10 sigma bonds and 3 pi bonds
Pent-2-en-4-yne is CH3-CH=CH-C#CH. Counting sigma bonds: 3 C-H bonds on C1(CH3), C1-C2, C2-H, C2=C3 sigma, C3-H, C3-C4, C4#C5 sigma, C5-H = 10 sigma bonds. Pi bonds: 1 from the C2=C3 double bond and 2 from the C4#C5 triple bond = 3 pi bonds total.
- Q16· Biomolecules
Enzymes that utilize ATP in phosphate transfer require an alkaline earth metal (M) as the cofactor. M is:
- A. Ca
- B. Sr
- C. Be
- D. Mg
Show answer
Answer: D — Mg
Mg2+ is the alkaline earth metal cofactor required by enzymes (kinases) that utilize ATP in phosphate transfer reactions, as it helps stabilize the negative charges on the phosphate groups of ATP.
- Q17· The p-Block Elements
Identify the incorrect statement related to PCl5 from the following:
- A. Axial P-Cl bonds are longer than equatorial P-Cl bonds
- B. PCl5 molecule is non-reactive
- C. Three equatorial P-Cl bonds make an angle of 120 degrees with each other
- D. Two axial P-Cl bonds make an angle of 180 degrees with each other
Show answer
Answer: B — PCl5 molecule is non-reactive
PCl5 is actually quite reactive, readily undergoing hydrolysis and other reactions, so the statement that it is 'non-reactive' is incorrect. The other statements about its trigonal bipyramidal geometry (longer axial bonds, 120 degree equatorial angles, 180 degree axial angle) are all correct.
- Q18· Chemical Kinetics
If the rate constant for a first order reaction is k, the time (t) required for the completion of 99% of the reaction is given by:
- A. t = 4.606/k
- B. t = 2.303/k
- C. t = 0.693/k
- D. t = 6.909/k
Show answer
Answer: A — t = 4.606/k
For a first order reaction, ln(C0/Ct) = kt. When 99% is consumed, Ct = C0/100, so ln(100) = kt, giving t = (2.303/k) x log(100) = (2.303/k) x 2 = 4.606/k.
- Q19· Hydrocarbons
The most suitable reagent for the following conversion is: H3C-C#C-CH3 (2-butyne) -> cis-2-butene
- A. Zn/HCl
- B. Hg2+/H+, H2O
- C. Na/liquid NH3
- D. H2, Pd/C, quinoline
Show answer
Answer: D — H2, Pd/C, quinoline
H2/Pd-C with quinoline (Lindlar's catalyst, poisoned palladium) selectively hydrogenates alkynes to cis-alkenes via syn addition, converting 2-butyne to cis-2-butene.
- Q20· The d- and f-Block Elements
The manganate and permanganate ions are tetrahedral, due to:
- A. The pi-bonding involves overlap of p-orbitals of oxygen with p-orbitals of manganese
- B. The pi-bonding involves overlap of d-orbitals of oxygen with d-orbitals of manganese
- C. The pi-bonding involves overlap of p-orbitals of oxygen with d-orbitals of manganese
- D. There is no pi-bonding
Show answer
Answer: C — The pi-bonding involves overlap of p-orbitals of oxygen with d-orbitals of manganese
In MnO4^2- and MnO4^-, the tetrahedral geometry arises from pi-bonding formed by overlap between filled p-orbitals of oxygen and empty d-orbitals of manganese (p-d pi bonding), in addition to the sigma framework.
- Q21· Electrochemistry
For a cell involving one electron, E(cell) standard = 0.59 V at 298K, the equilibrium constant for the cell reaction is: [Given that 2.303RT/F = 0.059 V at T=298K]
- A. 1.0 x 10^10
- B. 1.0 x 10^30
- C. 1.0 x 10^2
- D. 1.0 x 10^5
Show answer
Answer: A — 1.0 x 10^10
Using E_cell = (0.059/n)log(K): 0.59 = 0.059 x (1/1) x log(K), so log(K) = 0.59/0.059 = 10, giving K = 1 x 10^10.
- Q22· Equilibrium
pH of a saturated solution of Ca(OH)2 is 9. The solubility product (Ksp) of Ca(OH)2 is:
- A. 0.125 x 10^-15
- B. 0.5 x 10^-10
- C. 0.5 x 10^-15
- D. 0.25 x 10^-15
Show answer
Answer: C — 0.5 x 10^-15
pH=9, so pOH=5, [OH-]=10^-5. Ca(OH)2 dissociates as Ca2+ + 2OH-, with S = [Ca2+] and 2S = [OH-] = 10^-5, so S = 10^-5/2. Ksp = S x (2S)^2 = (10^-5/2) x (10^-5)^2 = 0.5 x 10^-15.
- Q23· Solutions
For an ideal solution the correct option is:
- A. Delta_mix H = 0 at constant T and P
- B. Delta_mix G = 0 at constant T and P
- C. Delta_mix S = 0 at constant T and P
- D. Delta_mix V is not equal to 0 at constant T and P
Show answer
Answer: A — Delta_mix H = 0 at constant T and P
For an ideal solution, there is no enthalpy change on mixing (Delta_mix H = 0) and no volume change on mixing (Delta_mix V = 0), since the interactions between different components are identical to interactions between like components.
- Q24· States of Matter
A gas at 350 K and 15 bar has molar volume 20 percent smaller than that for an ideal gas under the same conditions. The correct option about the gas and its compressibility factor (Z) is:
- A. Z < 1 and attractive forces are dominant
- B. Z < 1 and repulsive forces are dominant
- C. Z > 1 and attractive forces are dominant
- D. Z > 1 and repulsive forces are dominant
Show answer
Answer: A — Z < 1 and attractive forces are dominant
Z = (PV)real/(PV)ideal. Since the real molar volume is smaller than the ideal volume, Z < 1. When Z < 1, it indicates that attractive forces between gas molecules dominate, causing the gas to occupy less volume than predicted by the ideal gas law.
- Q25· Amines
The correct order of the basic strength of methyl substituted amines in aqueous solution is:
- A. (CH3)3N > (CH3)2NH > CH3NH2
- B. CH3NH2 > (CH3)2NH > (CH3)3N
- C. (CH3)2NH > CH3NH2 > (CH3)3N
- D. (CH3)3N > CH3NH2 > (CH3)2NH
Show answer
Answer: C — (CH3)2NH > CH3NH2 > (CH3)3N
In aqueous solution, basicity of methylamines follows the order secondary > primary > tertiary, i.e., (CH3)2NH > CH3NH2 > (CH3)3N, due to a balance of inductive effect, steric hindrance, and solvation (hydrogen bonding) effects in water.
- Q26· Classification of Elements and Periodicity in Properties
For the second period elements the correct increasing order of first ionisation enthalpy is:
- A. Li < B < Be < C < N < O < F < Ne
- B. Li < Be < B < C < O < N < F < Ne
- C. Li < Be < B < C < N < O < F < Ne
- D. Li < B < Be < C < O < N < F < Ne
Show answer
Answer: D — Li < B < Be < C < O < N < F < Ne
Due to extra stability of half-filled (N) and fully-filled (Be) configurations, and exceptions at B (lower than Be) and O (lower than N), the correct increasing order is Li < B < Be < C < O < N < F < Ne.
- Q27· Electrochemistry
For the cell reaction 2Fe3+(aq) + 2I-(aq) -> 2Fe2+(aq) + I2(aq), E(cell) standard = 0.24V at 298K. The standard Gibbs energy (Delta_r G standard) of the cell reaction is: (Given that Faraday constant F = 96500 C/mol)
- A. 46.32 kJ/mol
- B. 23.16 kJ/mol
- C. -46.32 kJ/mol
- D. -23.16 kJ/mol
Show answer
Answer: C — -46.32 kJ/mol
Delta G standard = -nFE standard = -2 x 96500 x 0.24 = -46320 J/mol = -46.32 kJ/mol.
- Q28· The p-Block Elements
Which is the correct thermal stability order for H2E (E = O, S, Se, Te and Po)?
- A. H2Po < H2Te < H2Se < H2S < H2O
- B. H2Se < H2Te < H2Po < H2O < H2S
- C. H2S < H2O < H2Se < H2Te < H2Po
- D. H2O < H2S < H2Se < H2Te < H2Po
Show answer
Answer: A — H2Po < H2Te < H2Se < H2S < H2O
Thermal stability of hydrides decreases down a group as bond dissociation energy decreases with increasing atomic size, so H2O is most stable and H2Po is least stable: H2Po < H2Te < H2Se < H2S < H2O.
- Q29· Equilibrium
The number of moles of hydrogen molecules required to produce 20 moles of ammonia through Haber's process is:
- A. 30
- B. 40
- C. 10
- D. 20
Show answer
Answer: A — 30
N2(g) + 3H2(g) -> 2NH3(g). Moles of H2/3 = Moles of NH3/2, so moles of H2 = (3/2) x 20 = 30 moles.
- Q30· Structure of Atom
Which of the following series of transitions in the spectrum of hydrogen atom falls in visible region?
- A. Paschen series
- B. Brackett series
- C. Lyman series
- D. Balmer series
Show answer
Answer: D — Balmer series
The Balmer series, resulting from electron transitions to the n=2 energy level, falls in the visible region of the electromagnetic spectrum. Lyman series falls in UV, while Paschen, Brackett, and Pfund series fall in the infrared region.
- Q31· The Solid State
A compound is formed by cation C and anion A. The anions form hexagonal close packed (hcp) lattice and the cations occupy 75% of octahedral voids. The formula of the compound is:
- A. C3A4
- B. C4A3
- C. C2A3
- D. C3A2
Show answer
Answer: A — C3A4
In hcp lattice, number of octahedral voids = number of anions = 6 (per unit cell basis). Cations occupy 75% of these: 6 x 0.75 = 4.5, giving ratio of cations:anions = 4.5:6 = 3:4. So formula is C3A4.
- Q32· Biomolecules
The non-essential amino acid among the following is:
- A. alanine
- B. lysine
- C. valine
- D. leucine
Show answer
Answer: A — alanine
Alanine is a non-essential amino acid, meaning the human body can synthesize it on its own. Lysine, valine, and leucine are all essential amino acids that must be obtained through diet.
- Q33· Hydrocarbons
An alkene 'A' on reaction with O3 and Zn-H2O gives propanone and ethanal in equimolar ratio. Addition of HCl to alkene 'A' gives 'B' as the major product. The structure of product 'B' is:
- A. H3C-CH2-C(CH3)(Cl)-CH3 (2-chloro-2-methylbutane)
- B. H3C-CH(Cl)-CH(CH3)-CH3
- C. Cl-CH2-CH2-CH(CH3)-CH3
- D. H3C-CH2-CH(CH2Cl)-CH3
Show answer
Answer: A — H3C-CH2-C(CH3)(Cl)-CH3 (2-chloro-2-methylbutane)
Ozonolysis giving propanone (CH3-CO-CH3) and ethanal (CH3CHO) in equimolar ratio means alkene A is 2-methyl-2-butene: (CH3)2C=CH-CH3. Addition of HCl follows Markovnikov's rule, with H+ adding to the carbon with more H (CH), and Cl- adding to the more substituted carbon via the more stable tertiary carbocation, giving 2-chloro-2-methylbutane: H3C-CH2-C(CH3)(Cl)-CH3.
- Q34· The p-Block Elements
Which of the following species is not stable?
- A. [Sn(OH)6]2-
- B. [SiCl6]2-
- C. [SiF6]2-
- D. [GeCl6]2-
Show answer
Answer: B — [SiCl6]2-
[SiCl6]2- is not stable because silicon's small atomic size does not allow six large chlorine atoms to be accommodated around it without significant steric strain, unlike with smaller fluorine atoms as in [SiF6]2-.
- Q35· The p-Block Elements
Match the Xenon compounds in Column-I with its structure in Column-II and assign the correct code: Column-I: (a) XeF4 (b) XeF6 (c) XeOF4 (d) XeO3 -- Column-II: (i) Pyramidal (ii) Square planar (iii) Distorted octahedral (iv) Square Pyramidal. Code:
- A. a-ii, b-iii, c-i, d-iv
- B. a-iii, b-iv, c-i, d-ii
- C. a-i, b-ii, c-iii, d-iv
- D. a-ii, b-iii, c-iv, d-i
Show answer
Answer: D — a-ii, b-iii, c-iv, d-i
XeF4 has square planar geometry (ii). XeF6 has distorted octahedral geometry (iii). XeOF4 has square pyramidal geometry (iv). XeO3 has pyramidal geometry (i). So the correct code is a-ii, b-iii, c-iv, d-i.
- Q36· Environmental Chemistry
Among the following, the one that is not a green house gas is:
- A. ozone
- B. sulphur dioxide
- C. nitrous oxide
- D. methane
Show answer
Answer: B — sulphur dioxide
Sulphur dioxide (SO2) is a major air pollutant and contributes to acid rain, but it is not classified as a greenhouse gas. Ozone, nitrous oxide, and methane are all recognized greenhouse gases that trap heat in the atmosphere.
- Q37· Redox Reactions
Which of the following reactions are disproportionation reactions? (a) 2Cu+ -> Cu2+ + Cu0 (b) 3MnO4^2- + 4H+ -> 2MnO4- + MnO2 + 2H2O (c) 2KMnO4 --heat--> K2MnO4 + MnO2 + O2 (d) 2MnO4- + 3Mn2+ + 2H2O -> 5MnO2 + 4H+. Select the correct option from the following:
- A. (a), (c) and (d)
- B. (a) and (d) only
- C. (a) and (b) only
- D. (a), (b) and (c)
Show answer
Answer: C — (a) and (b) only
In (a), Cu+ (oxidation state +1) disproportionates into Cu2+ (+2) and Cu0 (0), both oxidation and reduction of the same element. In (b), Mn in MnO4^2- (+6) disproportionates into MnO4- (+7) and MnO2 (+4). Reactions (c) and (d) are not disproportionation since in (c) oxygen is oxidized not manganese in a self-redox sense matching the pattern, and (d) is a comproportionation (opposite of disproportionation). So (a) and (b) are the correct disproportionation reactions.
- Q38· Alcohols, Phenols and Ethers
The structure of intermediate A in the following reaction is: Cumene (isopropylbenzene) + O2 -> A, then A + H+/H2O -> Phenol + Acetone
- A. Phenyl-O-O-CH(CH3)-CH3 structure (isopropyl peroxide attached via O-O to phenyl ring at CH)
- B. Phenyl-CH(CH3)-CH2-O-O-H structure
- C. Phenyl-O-CH(CH3)-CH3 structure (simple ether, no peroxide)
- D. Phenyl-C(CH3)2-O-O-H structure (cumene hydroperoxide)
Show answer
Answer: D — Phenyl-C(CH3)2-O-O-H structure (cumene hydroperoxide)
In the cumene process, cumene reacts with O2 to form cumene hydroperoxide (intermediate A), where the tertiary C-H of the isopropyl group is converted to C-O-O-H. Acid hydrolysis of cumene hydroperoxide then gives phenol and acetone.
- Q39· Solutions
The mixture that forms maximum boiling azeotrope is:
- A. Acetone + Carbon disulphide
- B. Heptane + Octane
- C. Water + Nitric acid
- D. Ethanol + Water
Show answer
Answer: C — Water + Nitric acid
Water and nitric acid form a maximum boiling azeotrope because they show negative deviation from Raoult's law due to strong intermolecular interactions (hydrogen bonding) between the two components.
- Q40· Coordination Compounds
What is the correct electronic configuration of the central atom in K4[Fe(CN)6] based on crystal field theory?
- A. e^3 t2^3
- B. e^4 t2^2
- C. t2g^4 eg^2
- D. t2g^6 eg^0
Show answer
Answer: D — t2g^6 eg^0
In K4[Fe(CN)6], iron is in the +2 oxidation state (Fe2+, d6 configuration). CN- is a strong field ligand causing pairing of electrons, so in the octahedral crystal field, all 6 electrons occupy the lower energy t2g orbitals, giving t2g^6 eg^0 configuration.
- Q41· Equilibrium
Conjugate base for Bronsted acids H2O and HF are:
- A. OH- and F-, respectively
- B. H3O+ and H2F+, respectively
- C. OH- and H2F+, respectively
- D. H3O+ and F-, respectively
Show answer
Answer: A — OH- and F-, respectively
A conjugate base is formed when a Bronsted acid loses a proton (H+). H2O loses H+ to form OH-, and HF loses H+ to form F-.
- Q42· Equilibrium
Which will make a basic buffer?
- A. 100 mL of 0.1 M HCl + 200 mL of 0.1 M NH4OH
- B. 100 mL of 0.1 M HCl + 100 mL of 0.1 M NaOH
- C. 50 mL of 0.1 M NaOH + 25 mL of 0.1 M CH3COOH
- D. 100 mL of 0.1 M CH3COOH + 100 mL of 0.1 M NaOH
Show answer
Answer: A — 100 mL of 0.1 M HCl + 200 mL of 0.1 M NH4OH
Mixing HCl with excess NH4OH (weak base): HCl + NH4OH -> NH4Cl + H2O. With 0.01 mol HCl and 0.02 mol NH4OH, after reaction 0.01 mol NH4OH remains along with 0.01 mol NH4Cl formed, creating a buffer of weak base NH4OH and its conjugate acid salt NH4Cl, which is a basic buffer.
- Q43· Structure of Atom
4d, 5p, 5f and 6p orbitals are arranged in the order of decreasing energy. The correct option is:
- A. 6p > 5f > 4d > 5p
- B. 5f > 6p > 4d > 5p
- C. 5f > 6p > 5p > 4d
- D. 6p > 5f > 5p > 4d
Show answer
Answer: C — 5f > 6p > 5p > 4d
Using the (n+l) rule: 5f has (n+l)=8, 6p has (n+l)=7, 5p has (n+l)=6, 4d has (n+l)=6. Among 5p and 4d with same (n+l)=6, lower n (4d) has lower energy. So decreasing energy order is 5f > 6p > 5p > 4d.
- Q44· Biomolecules
Among the following, the narrow spectrum antibiotic is:
- A. amoxycillin
- B. chloramphenicol
- C. penicillin G
- D. ampicillin
Show answer
Answer: C — penicillin G
Penicillin G is a narrow spectrum antibiotic, effective mainly against Gram-positive bacteria. Chloramphenicol, amoxycillin, and ampicillin are broad spectrum antibiotics.
- Q45· Aldehydes, Ketones and Carboxylic Acids
The major product of the following reaction is: Phthalic acid (benzene-1,2-dicarboxylic acid) + NH3, strong heating ->
- A. 2-aminobenzoic acid (anthranilic acid)
- B. 1,2-diaminobenzene (o-phenylenediamine)
- C. 2-carbamoylbenzoic acid (phthalamic acid)
- D. Phthalimide (cyclic imide)
Show answer
Answer: D — Phthalimide (cyclic imide)
Strong heating of phthalic acid with NH3 first forms the diamide, which then undergoes intramolecular cyclization with loss of NH3, forming the cyclic imide phthalimide as the major product.
- Q46· The s-Block Elements
The method used to remove temporary hardness of water is:
- A. Ion-exchange method
- B. Synthetic resins method
- C. Calgon's method
- D. Clark's method
Show answer
Answer: D — Clark's method
Clark's method uses calcium hydroxide (slaked lime) to remove temporary hardness of water by precipitating calcium and magnesium bicarbonates as insoluble carbonates. Ion-exchange, synthetic resins, and Calgon's method are typically used for removing permanent hardness.
- Q47· General Principles and Processes of Isolation of Elements
Which one is malachite from the following?
- A. Fe3O4
- B. CuCO3.Cu(OH)2
- C. CuFeS2
- D. Cu(OH)2
Show answer
Answer: B — CuCO3.Cu(OH)2
Malachite is a copper ore with the formula CuCO3.Cu(OH)2 (basic copper carbonate). Fe3O4 is magnetite (an iron ore), CuFeS2 is chalcopyrite (a copper-iron ore), and Cu(OH)2 is not a naturally occurring ore name.
Take NEET-style timed mocks with your rank
Full 720-mark mocks, NEET 2019 PYQs and instant analysis. Free for 30 days, no card.
Compare NEET course plans for every class.
Take NEET-style timed mocks with your rank
Full 720-mark mocks, NEET 2019 PYQs and instant analysis. Free for 30 days, no card.
Compare NEET course plans for every class.
Take NEET-style timed mocks with your rank
Full 720-mark mocks, NEET 2019 PYQs and instant analysis. Free for 30 days, no card.
Compare NEET course plans for every class.
Take NEET-style timed mocks with your rank
Full 720-mark mocks, NEET 2019 PYQs and instant analysis. Free for 30 days, no card.
Compare NEET course plans for every class.
More free practice: chapter-wise PYQs · NEET Question of the Day · Readiness Test