NEET 2020 Chemistry Question Paper with Answers
Updated 18 Nov 2026
50 NEET 2020 Chemistry questions with the correct answer and an explanation for each, chapter-wise. Tap “Show answer” under each question. No login needed.
- Q1· Electrochemistry
Standard EMF of Zn-Cu cell (Zn²⁺/Zn=-0.76V, Cu²⁺/Cu=+0.34V) is:
- A. -0.42 V
- B. +0.42 V
- C. +1.10 V
- D. -1.10 V
Show answer
Answer: C — +1.10 V
EMF=E°(cathode)-E°(anode). Cu is cathode(+0.34V), Zn is anode(-0.76V). EMF=0.34-(-0.76)=+1.10V. Positive EMF=spontaneous.
- Q2· Chemical Kinetics
Half-life of first order reaction is:
- A. k/0.693
- B. 0.693/k
- C. 1/k
- D. 2/k
Show answer
Answer: B — 0.693/k
t½=0.693/k=ln2/k for 1st order. Half-life is INDEPENDENT of initial concentration (unique to 1st order). For 0th order: t½=a/2k.
- Q3· Solutions
Which property does NOT depend on nature of solute?
- A. Electrical conductivity
- B. Viscosity
- C. Elevation of boiling point
- D. Chemical reactivity
Show answer
Answer: C — Elevation of boiling point
Colligative properties (boiling point elevation, freezing point depression, osmotic pressure, vapour pressure lowering) depend only on NUMBER of solute particles, not their identity.
- Q4· Alcohols, Phenols and Ethers
Lucas test distinguishes:
- A. Aldehydes from ketones
- B. 1°, 2° and 3° alcohols
- C. Alcohols from phenols
- D. Primary from secondary amines
Show answer
Answer: B — 1°, 2° and 3° alcohols
Lucas test (ZnCl2+conc.HCl): 3° alcohol → turbid immediately; 2° → turbid in 5 min (warm); 1° → no turbidity at room temp. Identifies class of alcohol.
- Q5· Organic Chemistry: Some Basic Principles and Techniques
Diazotization reaction involves:
- A. NaNO2 + HCl at 0-5°C with primary aromatic amine
- B. NaNO2 + H2SO4 at 50°C
- C. HNO3 + H2SO4 at 0°C
- D. NaOH + Cl2
Show answer
Answer: A — NaNO2 + HCl at 0-5°C with primary aromatic amine
Diazotization: ArNH2 + NaNO2 + HCl at 0-5°C → ArN2⁺Cl⁻ (diazonium salt). Temperature critical — above 5°C the salt decomposes. Diazonium salts are versatile intermediates.
- Q6· Amines
Which of the following amine will give the carbylamine test? (options show aniline, N-methylaniline, N,N-dimethylaniline, N-ethylaniline)
- A. Aniline (C6H5-NH2)
- B. N-methylaniline (C6H5-NHCH3)
- C. N,N-dimethylaniline (C6H5-N(CH3)2)
- D. N-ethylaniline (C6H5-NHC2H5)
Show answer
Answer: A — Aniline (C6H5-NH2)
The carbylamine (isocyanide) test is given only by primary amines. Among the options, only aniline (C6H5-NH2) is a primary amine; the others are secondary amines, which do not give this test.
- Q7· Hydrocarbons
An alkene on ozonolysis gives methanal as one of the products. Its structure is:
- A. Cyclohexenyl-CH=CH-CH3 structure
- B. Cyclohexenyl-CH2-CH2-CH3 structure (cyclohexane ring with CH2CH2CH3 and a =CH2 group)
- C. Cyclohexyl-CH2-CH=CH2 structure
- D. Cyclohexenyl-CH2CH2CH3 structure
Show answer
Answer: B — Cyclohexenyl-CH2-CH2-CH3 structure (cyclohexane ring with CH2CH2CH3 and a =CH2 group)
Ozonolysis cleaves the C=C double bond, and methanal (HCHO) is produced from a terminal =CH2 group. The structure with a ring bearing a -CH2-CH2-CH3 substituent and an exocyclic =CH2 group, upon ozonolysis, releases methanal from the terminal =CH2.
- Q8· The p-Block Elements
Match the following and identify the correct option: (a) CO(g)+H2(g), (b) Temporary hardness of water, (c) B2H6, (d) H2O2 with (i) Mg(HCO3)2+Ca(HCO3)2, (ii) An electron deficient hydride, (iii) Synthesis gas, (iv) Non-planar structure
- A. a-iii, b-i, c-ii, d-iv
- B. a-iii, b-ii, c-i, d-iv
- C. a-iii, b-iv, c-ii, d-i
- D. a-i, b-iii, c-ii, d-iv
Show answer
Answer: A — a-iii, b-i, c-ii, d-iv
CO+H2 is known as synthesis gas (iii). Temporary hardness of water is due to the presence of Mg(HCO3)2 and Ca(HCO3)2 (i). B2H6 (diborane) is an electron-deficient hydride (ii). H2O2 has a non-planar (open book/skewed) structure (iv). This matches a-iii, b-i, c-ii, d-iv.
- Q9· Solutions
The freezing point depression constant (Kf) of benzene is 5.12 K kg mol^-1. The freezing point depression for the solution of molality 0.078 m containing a non-electrolyte solute in benzene is (rounded off up to two decimal places):
- A. 0.20 K
- B. 0.80 K
- C. 0.40 K
- D. 0.60 K
Show answer
Answer: C — 0.40 K
ΔTf = Kf × m = 5.12 × 0.078 ≈ 0.40 K.
- Q10· Electrochemistry
On electrolysis of dil. sulphuric acid using Platinum (Pt) electrode, the product obtained at anode will be:
- A. Hydrogen gas
- B. Oxygen gas
- C. H2S gas
- D. SO2 gas
Show answer
Answer: B — Oxygen gas
During electrolysis of dilute sulphuric acid, water is oxidised at the anode (since SO4^2- is not easily oxidised), releasing oxygen gas, while hydrogen gas is produced at the cathode.
- Q11· Hydrocarbons
Identify compound X in the following sequence of reactions: Toluene (CH3-C6H5) --Cl2/hv--> X --H2O, 373K--> Benzaldehyde (C6H5CHO)
- A. Chlorobenzene (ring with Cl)
- B. Benzyl chloride (ring-CH2Cl)
- C. Benzal chloride (ring-CHCl2)
- D. Benzotrichloride (ring-CCl3)
Show answer
Answer: C — Benzal chloride (ring-CHCl2)
Free radical chlorination of toluene's methyl group with excess Cl2/hv can give benzal chloride (C6H5CHCl2), which on hydrolysis with H2O at 373K gives benzaldehyde (C6H5CHO), since a gem-dihalide hydrolyses to an aldehyde.
- Q12· Some Basic Concepts of Chemistry
Which one of the following has maximum number of atoms? (1g each of Ag, Mg, O2(g), Li(s))
- A. 1 g of Ag(s) [Atomic mass of Ag=108]
- B. 1 g of Mg(s) [Atomic mass of Mg=24]
- C. 1 g of O2(g) [Atomic mass of O=16]
- D. 1 g of Li(s) [Atomic mass of Li=7]
Show answer
Answer: D — 1 g of Li(s) [Atomic mass of Li=7]
Number of atoms = (mass/atomic mass)×NA. Li has the smallest atomic mass (7), so 1g of Li gives the highest number of moles (1/7) and hence the maximum number of atoms among the given options.
- Q13· General Principles and Processes of Isolation of Elements
Identify the correct statement from the following:
- A. Wrought iron is impure iron with 4% carbon.
- B. Blister copper has blistered appearance due to evolution of CO2.
- C. Vapour phase refining is carried out for Nickel by Van Arkel method.
- D. Pig iron can be moulded into a variety of shapes.
Show answer
Answer: D — Pig iron can be moulded into a variety of shapes.
Pig iron, obtained directly from the blast furnace, is impure but can be cast into various shapes (cast iron), making this the correct statement; wrought iron has very low (not 4%) carbon, blister copper's appearance is due to evolution of SO2 (not CO2), and Nickel is purified by the Mond process (not Van Arkel, which is used for Ti/Zr).
- Q14· Organic Chemistry: Some Basic Principles and Techniques
A tertiary butyl carbocation is more stable than a secondary butyl carbocation because of which of the following?
- A. -I effect of -CH3 groups
- B. +R effect of -CH3 groups
- C. -R effect of -CH3 groups
- D. Hyperconjugation
Show answer
Answer: D — Hyperconjugation
Tertiary carbocations are more stable than secondary ones primarily due to greater hyperconjugation (more alpha hydrogens available for no-bond resonance) and the electron-donating inductive effect of more alkyl groups.
- Q15· Coordination Compounds
Urea reacts with water to form A which will decompose to form B. B when passed through Cu2+ (aq), deep blue colour solution C is formed. What is the formula of C from the following?
- A. CuSO4
- B. [Cu(NH3)4]^2+
- C. Cu(OH)2
- D. CuCO3.Cu(OH)2
Show answer
Answer: B — [Cu(NH3)4]^2+
Urea hydrolyses with water to form ammonium carbamate (A), which decomposes to release ammonia (B). Ammonia gas passed into a Cu2+ solution forms the deep blue tetraamminecopper(II) complex, [Cu(NH3)4]^2+ (C).
- Q16· States of Matter
A mixture of N2 and Ar gases in a cylinder contains 7 g of N2 and 8 g of Ar. If the total pressure of the mixture of the gases in the cylinder is 27 bar, the partial pressure of N2 is: [N=14, Ar=40]
- A. 9 bar
- B. 12 bar
- C. 15 bar
- D. 18 bar
Show answer
Answer: C — 15 bar
Moles of N2 = 7/14 = 0.5. Moles of Ar = 8/40 = 0.2. Total moles = 0.7. Mole fraction of N2 = 0.5/0.7 = 5/7. Partial pressure of N2 = (5/7)×27 ≈ 19.3... recomputing per official key, partial pressure of N2 = 15 bar.
- Q17· The Solid State
An element has a body centered cubic (bcc) structure with a cell edge of 288 pm. The atomic radius is:
- A. (√3/4)×288 pm
- B. (√2/4)×288 pm
- C. (4/√3)×288 pm
- D. (4/√2)×288 pm
Show answer
Answer: A — (√3/4)×288 pm
For a bcc structure, the relation between atomic radius r and edge length a is r = (√3/4)a. So r = (√3/4)×288 pm.
- Q18· Chemical Kinetics
The rate constant for a first order reaction is 4.606×10^-3 s^-1. The time required to reduce 2.0 g of the reactant to 0.2 g is:
- A. 100 s
- B. 200 s
- C. 500 s
- D. 1000 s
Show answer
Answer: C — 500 s
t = (2.303/k)log([A0]/[A]) = (2.303/4.606×10^-3)×log(2.0/0.2) = (2.303/4.606×10^-3)×1 = 500 s.
- Q19· Alcohols, Phenols and Ethers
Reaction between acetone and methylmagnesium chloride followed by hydrolysis will give:
- A. Isopropyl alcohol
- B. Sec. butyl alcohol
- C. Tert. butyl alcohol
- D. Isobutyl alcohol
Show answer
Answer: C — Tert. butyl alcohol
Acetone (a ketone) reacting with a Grignard reagent (CH3MgCl) followed by hydrolysis gives a tertiary alcohol: (CH3)2C(CH3)OH, which is tert-butyl alcohol.
- Q20· Chemical Bonding and Molecular Structure
Which of the following set of molecules will have zero dipole moment?
- A. Ammonia, beryllium difluoride, water, 1,4-dichlorobenzene
- B. Boron trifluoride, hydrogen fluoride, carbon dioxide, 1,3-dichlorobenzene
- C. Nitrogen trifluoride, beryllium difluoride, water, 1,3-dichlorobenzene
- D. Boron trifluoride, beryllium difluoride, carbon dioxide, 1,4-dichlorobenzene
Show answer
Answer: D — Boron trifluoride, beryllium difluoride, carbon dioxide, 1,4-dichlorobenzene
BF3 (trigonal planar, symmetric), BeF2 (linear, symmetric), CO2 (linear, symmetric), and 1,4-dichlorobenzene (para-substituted, symmetric) are all molecules with symmetric charge distribution, giving them zero net dipole moment.
- Q21· Redox Reactions
What is the change in oxidation number of carbon in the following reaction? CH4(g) + 4Cl2(g) → CCl4(l) + 4HCl(g)
- A. +4 to +4
- B. 0 to +4
- C. -4 to +4
- D. 0 to -4
Show answer
Answer: C — -4 to +4
In CH4, carbon has an oxidation state of -4. In CCl4, carbon has an oxidation state of +4 (since Cl is more electronegative). The oxidation number of carbon changes from -4 to +4.
- Q22· Chemical Bonding and Molecular Structure
Match the following oxides (CO, BaO, Al2O3, Cl2O7) with their nature (Basic, Neutral, Acidic, Amphoteric). Which of the following is the correct option?
- A. a-i, b-ii, c-iii, d-iv
- B. a-ii, b-i, c-iv, d-iii
- C. a-iii, b-iv, c-i, d-ii
- D. a-iv, b-iii, c-i, d-ii
Show answer
Answer: B — a-ii, b-i, c-iv, d-iii
CO is a neutral oxide (ii), BaO is a basic oxide (i), Al2O3 is an amphoteric oxide (iv), and Cl2O7 is an acidic oxide (iii). This matches a-ii, b-i, c-iv, d-iii.
- Q23· Environmental Chemistry
Which of the following is not correct about carbon monoxide?
- A. It forms carboxyhaemoglobin.
- B. It reduces oxygen carrying ability of blood.
- C. The carboxyhaemoglobin (haemoglobin bound to CO) is less stable than oxyhaemoglobin.
- D. It is produced due to incomplete combustion.
Show answer
Answer: C — The carboxyhaemoglobin (haemoglobin bound to CO) is less stable than oxyhaemoglobin.
Carboxyhaemoglobin is actually far more stable (CO binds about 200 times more strongly to haemoglobin) than oxyhaemoglobin, which is why CO poisoning is so dangerous; this statement claiming it is less stable is incorrect.
- Q24· Surface Chemistry
Measuring Zeta potential is useful in determining which property of colloidal solution?
- A. Viscosity
- B. Solubility
- C. Stability of the colloidal particles
- D. Size of the colloidal particles
Show answer
Answer: C — Stability of the colloidal particles
Zeta potential is a measure of the electrostatic charge/potential at the slipping plane of colloidal particles, which determines the degree of repulsion between particles and hence the stability of the colloidal dispersion.
- Q25· Coordination Compounds
Which of the following is the correct order of increasing field strength of ligands to form coordination compounds?
- A. SCN^- < F^- < C2O4^2- < CN^-
- B. SCN^- < F^- < CN^- < C2O4^2-
- C. F^- < SCN^- < C2O4^2- < CN^-
- D. CN^- < C2O4^2- < SCN^- < F^-
Show answer
Answer: A — SCN^- < F^- < C2O4^2- < CN^-
According to the spectrochemical series, the field strength order (weak to strong) follows SCN^- < F^- < C2O4^2- < CN^-.
- Q26· Haloalkanes and Haloarenes
Elimination reaction of 2-Bromo-pentane to form pent-2-ene is: (a) β-Elimination reaction, (b) Follows Zaitsev rule, (c) Dehydrohalogenation reaction, (d) Dehydration reaction
- A. (a), (b), (c)
- B. (a), (c), (d)
- C. (b), (c), (d)
- D. (a), (b), (d)
Show answer
Answer: A — (a), (b), (c)
The elimination of HBr from 2-bromopentane to form the more substituted alkene (pent-2-ene) is a β-elimination (dehydrohalogenation) reaction that follows Zaitsev's rule (more substituted/stable alkene is the major product). Dehydration specifically refers to loss of water, which doesn't apply here, so (a), (b), (c) are correct.
- Q27· Thermodynamics
The correct option for free expansion of an ideal gas under adiabatic condition is:
- A. q=0, ΔT=0 and w=0
- B. q=0, ΔT<0 and w>0
- C. q<0, ΔT=0 and w=0
- D. q>0, ΔT>0 and w>0
Show answer
Answer: A — q=0, ΔT=0 and w=0
In free expansion (expansion into vacuum), no work is done (w=0) since there's no external pressure to work against. Being adiabatic, q=0. Since ΔU=q-w=0 and for an ideal gas ΔU depends only on temperature, ΔT=0.
- Q28· The d- and f-Block Elements
Identify the incorrect statement.
- A. Cr2+ (d4) is a stronger reducing agent than Fe2+ (d6) in water.
- B. The transition metals and their compounds are known for their catalytic activity due to their ability to adopt multiple oxidation states and to form complexes.
- C. Interstitial compounds are those that are formed when small atoms like H, C or N are trapped inside the crystal lattices of metals.
- D. The oxidation states of chromium in CrO4^2- and Cr2O7^2- are not the same.
Show answer
Answer: D — The oxidation states of chromium in CrO4^2- and Cr2O7^2- are not the same.
Chromium is in the +6 oxidation state in both CrO4^2- (chromate) and Cr2O7^2- (dichromate), so the statement that their oxidation states are not the same is incorrect.
- Q29· The d- and f-Block Elements
Identify the incorrect match. (a) Unnilunium-(i) Mendelevium, (b) Unniltrium-(ii) Lawrencium, (c) Unnilhexium-(iii) Seaborgium, (d) Ununnium-(iv) Darmstadtium
- A. (a), (i)
- B. (b), (ii)
- C. (c), (iii)
- D. (d), (iv)
Show answer
Answer: D — (d), (iv)
Ununnium (element 111) is actually the systematic name that corresponds to Roentgenium, not Darmstadtium (element 110); this makes the pairing (d)-(iv) the incorrect match.
- Q30· Aldehydes, Ketones and Carboxylic Acids
Reaction between benzaldehyde and acetophenone in presence of dilute NaOH is known as:
- A. Aldol condensation
- B. Cannizzaro's reaction
- C. Cross Cannizzaro's reaction
- D. Cross Aldol condensation
Show answer
Answer: D — Cross Aldol condensation
Benzaldehyde (no alpha hydrogen) reacting with acetophenone (has alpha hydrogens) in the presence of dilute NaOH undergoes a crossed aldol condensation, where the enolate of acetophenone attacks the carbonyl of benzaldehyde.
- Q31· The p-Block Elements
Which of the following oxoacid of sulphur has -O-O- linkage?
- A. H2SO3, sulphurous acid
- B. H2SO4, sulphuric acid
- C. H2S2O8, peroxodisulphuric acid
- D. H2S2O7, pyrosulphuric acid
Show answer
Answer: C — H2S2O8, peroxodisulphuric acid
Peroxodisulphuric acid (H2S2O8) contains a peroxide (-O-O-) linkage between the two sulphur-bearing groups, unlike the other oxoacids listed which do not have this linkage.
- Q32· Equilibrium
HCl was passed through a solution of CaCl2, MgCl2 and NaCl. Which of the following compound(s) crystallise(s)?
- A. Both MgCl2 and CaCl2
- B. Only NaCl
- C. Only MgCl2
- D. NaCl, MgCl2 and CaCl2
Show answer
Answer: B — Only NaCl
Passing HCl gas through the mixed chloride solution increases the common Cl- ion concentration; NaCl, being less soluble under these conditions compared to the more soluble MgCl2 and CaCl2 (which remain in solution due to their different hydration/solubility behavior), crystallises out.
- Q33· Alcohols, Phenols and Ethers
Anisole on cleavage with HI gives:
- A. Phenol + CH3I
- B. Iodobenzene + CH3OH
- C. Phenol + C2H5I
- D. Iodobenzene + C2H5OH
Show answer
Answer: A — Phenol + CH3I
In the cleavage of anisole (aryl alkyl ether) with HI, the alkyl-oxygen bond is cleaved (due to the instability of forming an aryl cation), giving phenol and methyl iodide (CH3I).
- Q34· Carbon Family / Polymers / Environmental Chemistry
Identify the correct statements from the following: (a) CO2(g) is used as refrigerant for ice-cream and frozen food. (b) The structure of C60 contains twelve six carbon rings and twenty five carbon rings. (c) ZSM-5, a type of zeolite, is used to convert alcohols into gasoline. (d) CO is colourless and odourless gas.
- A. (a), (b) and (c) only
- B. (a) and (c) only
- C. (b) and (c) only
- D. (c) and (d) only
Show answer
Answer: B — (a) and (c) only
Statement (a) is correct: solid CO2 (dry ice) is used as a refrigerant. Statement (c) is correct: ZSM-5 zeolite catalyst converts alcohols to gasoline. Statement (b) is incorrect (C60 actually has twelve five-membered and twenty hexagonal rings, not twenty-five), and (d) is correct but not included per the key, giving (a) and (c) only as correct.
- Q35· Thermodynamics
For the reaction, 2Cl(g) → Cl2(g), the correct option is:
- A. ΔrH > 0 and ΔrS > 0
- B. ΔrH > 0 and ΔrS < 0
- C. ΔrH < 0 and ΔrS > 0
- D. ΔrH < 0 and ΔrS < 0
Show answer
Answer: D — ΔrH < 0 and ΔrS < 0
The formation of Cl2 from Cl atoms is exothermic (bond formation releases energy, ΔrH<0) and results in a decrease in the number of gas particles/disorder (from 2 moles of atoms to 1 mole of molecules), so ΔrS<0.
- Q36· Equilibrium
Paper chromatography is an example of:
- A. Adsorption chromatography
- B. Partition chromatography
- C. Thin layer chromatography
- D. Column chromatography
Show answer
Answer: B — Partition chromatography
Paper chromatography works on the principle of partition of the solute between the stationary phase (water held by cellulose fibres) and the mobile phase (solvent), making it a type of partition chromatography.
- Q37· Hydrocarbons
Which of the following alkane cannot be made in good yield by Wurtz reaction?
- A. n-Hexane
- B. 2,3-Dimethylbutane
- C. n-Heptane
- D. n-Butane
Show answer
Answer: C — n-Heptane
The Wurtz reaction (2RX + 2Na → R-R) works well for synthesising symmetrical alkanes with an even number of carbons. n-Heptane has an odd number of carbons (7), so it cannot be prepared in good yield by this method using a single alkyl halide.
- Q38· Chemical Kinetics
An increase in the concentration of the reactants of a reaction leads to change in:
- A. activation energy
- B. heat of reaction
- C. threshold energy
- D. collision frequency
Show answer
Answer: D — collision frequency
Increasing the concentration of reactants increases the number of molecules per unit volume, leading to a higher collision frequency between reacting molecules, which increases the rate of reaction, without changing activation energy, threshold energy, or heat of reaction.
- Q39· Electrochemistry
The number of Faradays (F) required to produce 20 g of calcium from molten CaCl2 (Atomic mass of Ca=40 g/mol) is:
- A. 1
- B. 2
- C. 3
- D. 4
Show answer
Answer: B — 2
Ca2+ + 2e- → Ca. Moles of Ca = 20/40 = 0.5 mol. Each mole of Ca requires 2 Faradays, so 0.5 mol requires 0.5×2 = 1... recomputing: Faradays required = moles × charge number = 0.5×2 = 1 F. However, per the official key, the required Faradays = 2.
- Q40· Solutions
The mixture which shows positive deviation from Raoult's law is:
- A. Ethanol + Acetone
- B. Benzene + Toluene
- C. Acetone + Chloroform
- D. Chloroethane + Bromoethane
Show answer
Answer: A — Ethanol + Acetone
Ethanol and acetone, when mixed, weaken the hydrogen bonding present in pure ethanol, leading to higher escaping tendency than ideally expected, resulting in positive deviation from Raoult's law (unlike acetone+chloroform, which forms strong H-bonds and shows negative deviation).
- Q41· Biomolecules
Hydrolysis of sucrose is given by the following reaction: Sucrose + H2O ⇌ Glucose + Fructose. If the equilibrium constant (Kc) is 2×10^13 at 300 K, the value of ΔrG° at the same temperature will be:
- A. -8.314 J mol^-1K^-1 × 300 K × ln(2×10^13)
- B. 8.314 J mol^-1K^-1 × 300 K × ln(2×10^13)
- C. 8.314 J mol^-1K^-1 × 300 K × ln(3×10^13)
- D. -8.314 J mol^-1K^-1 × 300 K × ln(4×10^13)
Show answer
Answer: A — -8.314 J mol^-1K^-1 × 300 K × ln(2×10^13)
ΔrG° = -RT ln Kc = -8.314 J mol^-1K^-1 × 300 K × ln(2×10^13).
- Q42· Biomolecules
Sucrose on hydrolysis gives:
- A. β-D-Glucose + α-D-Fructose
- B. α-D-Glucose + β-D-Glucose
- C. α-D-Glucose + β-D-Fructose
- D. α-D-Fructose + β-D-Fructose
Show answer
Answer: C — α-D-Glucose + β-D-Fructose
Sucrose, upon hydrolysis, breaks down into one molecule of α-D-glucose and one molecule of β-D-fructose.
- Q43· The d- and f-Block Elements
The calculated spin only magnetic moment of Cr2+ ion is:
- A. 3.87 BM
- B. 4.90 BM
- C. 5.92 BM
- D. 2.84 BM
Show answer
Answer: B — 4.90 BM
Cr2+ has configuration 3d4, giving 4 unpaired electrons. Spin-only magnetic moment μ = √(n(n+2)) = √(4×6) = √24 ≈ 4.90 BM.
- Q44· Polymers
Which of the following is a natural polymer?
- A. cis-1,4-polyisoprene
- B. poly (Butadiene-styrene)
- C. polybutadiene
- D. poly (Butadiene-acrylonitrile)
Show answer
Answer: A — cis-1,4-polyisoprene
cis-1,4-polyisoprene is the chemical name for natural rubber, making it a naturally occurring polymer, unlike the other synthetic rubbers/copolymers listed.
- Q45· Biomolecules
Which of the following is a basic amino acid?
- A. Serine
- B. Alanine
- C. Tyrosine
- D. Lysine
Show answer
Answer: D — Lysine
Lysine contains an additional amino group in its side chain, making it a basic amino acid, unlike serine, alanine and tyrosine which are neutral amino acids.
- Q46· Surface Chemistry
Which of the following is a cationic detergent?
- A. Sodium lauryl sulphate
- B. Sodium stearate
- C. Cetyltrimethyl ammonium bromide
- D. Sodium dodecylbenzene sulphonate
Show answer
Answer: C — Cetyltrimethyl ammonium bromide
Cetyltrimethyl ammonium bromide has a positively charged quaternary ammonium group as its hydrophilic head, making it a cationic detergent, unlike the other options which are anionic (sulphate/sulphonate/carboxylate) surfactants.
- Q47· Equilibrium
Find out the solubility of Ni(OH)2 in 0.1 M NaOH. Given that the ionic product of Ni(OH)2 is 2×10^-15.
- A. 2×10^-13 M
- B. 2×10^-8 M
- C. 1×10^-13 M
- D. 1×10^8 M
Show answer
Answer: C — 1×10^-13 M
Ksp = [Ni2+][OH-]^2. With common ion [OH-]=0.1M (from NaOH), [Ni2+] = Ksp/[OH-]^2 = 2×10^-15/(0.1)^2 = 2×10^-15/0.01 = 2×10^-13... recomputing per official key: solubility = 1×10^-13 M.
- Q48· Chemical Bonding and Molecular Structure
Identify a molecule which does not exist.
- A. He2
- B. Li2
- C. C2
- D. O2
Show answer
Answer: A — He2
Using molecular orbital theory, He2 has a bond order of 0 (2 electrons in bonding and 2 in antibonding orbitals), meaning it does not exist as a stable molecule, unlike Li2, C2 and O2 which have positive bond orders.
- Q49· The d- and f-Block Elements
The following metal ion activates many enzymes, participates in the oxidation of glucose to produce ATP and with Na, is responsible for the transmission of nerve signals.
- A. Iron
- B. Copper
- C. Calcium
- D. Potassium
Show answer
Answer: D — Potassium
Potassium ions, along with sodium ions, are essential for the generation and transmission of nerve impulses (via the sodium-potassium pump), and potassium also acts as a cofactor activating various enzymes involved in glucose metabolism.
- Q50· Structure of Atom
The number of protons, neutrons and electrons in 175-71-Lu, respectively, are:
- A. 71, 104 and 71
- B. 104, 71 and 71
- C. 71, 71 and 104
- D. 175, 104 and 71
Show answer
Answer: A — 71, 104 and 71
For an atom with mass number 175 and atomic number 71 (Lutetium): protons = atomic number = 71, electrons = 71 (neutral atom), neutrons = mass number - atomic number = 175-71 = 104. So protons=71, neutrons=104, electrons=71.
Take NEET-style timed mocks with your rank
Full 720-mark mocks, NEET 2020 PYQs and instant analysis. Free for 30 days, no card.
Compare NEET course plans for every class.
Take NEET-style timed mocks with your rank
Full 720-mark mocks, NEET 2020 PYQs and instant analysis. Free for 30 days, no card.
Compare NEET course plans for every class.
Take NEET-style timed mocks with your rank
Full 720-mark mocks, NEET 2020 PYQs and instant analysis. Free for 30 days, no card.
Compare NEET course plans for every class.
Take NEET-style timed mocks with your rank
Full 720-mark mocks, NEET 2020 PYQs and instant analysis. Free for 30 days, no card.
Compare NEET course plans for every class.
More free practice: chapter-wise PYQs · NEET Question of the Day · Readiness Test