NEET 2024 Physics Question Paper with Answers
Updated 18 Nov 2026
50 NEET 2024 Physics questions with the correct answer and an explanation for each, chapter-wise. Tap “Show answer” under each question. No login needed.
- Q1· Laws of Motion
A bob is whirled in a horizontal plane by means of a string with an initial speed of ω rpm. The tension in the string is T. If speed becomes 2ω while keeping the same radius, the tension in the string becomes:
- A. T/4
- B. √2 T
- C. T
- D. 4T
Show answer
Answer: D — 4T
Since r and m are constant, T ∝ ω². So T1/T2 = ω²/(2ω)² = 1/4, giving T2 = 4T.
- Q2· Laws of Motion
A horizontal force 10 N is applied to a block A as shown in figure. The mass of blocks A and B are 2 kg and 3 kg, respectively. The blocks slide over a frictionless surface. The force exerted by block A on block B is: [Figure: F=10N applied to block A (2kg) pushing block B (3kg), both on frictionless surface]
- A. 6 N
- B. 10 N
- C. zero
- D. 4 N
Show answer
Answer: A — 6 N
Common acceleration a = F/m = 10/5 = 2 m/s². Force on B from A: N = m_B × a = 3 × 2 = 6 N.
- Q3· Mechanical Properties of Solids
The maximum elongation of a steel wire of 1 m length if the elastic limit of steel and its Young's modulus, respectively, are 8×10⁸ N m⁻² and 2×10¹¹ N m⁻², is:
- A. 40 mm
- B. 8 mm
- C. 4 mm
- D. 0.4 mm
Show answer
Answer: C — 4 mm
ΔL = FL/AY, so (ΔL·Y)/L = F/A = 8×10⁸ (elastic limit stress). ΔL × 2×10¹¹ / 1 = 8×10⁸, so ΔL = 8×10⁸ / 2×10¹¹ = 4×10⁻³ m = 4 mm.
- Q4· Magnetism and Matter
In a uniform magnetic field of 0.049 T, a magnetic needle performs 20 complete oscillations in 5 seconds as shown. The moment of inertia of the needle is 9.8×10⁻⁶ kg m². If the magnitude of magnetic moment of the needle is x×10⁻⁵ A m²; then the value of 'x' is: [Figure: magnetic needle NS in uniform field B]
- A. 50 π²
- B. 1280 π²
- C. 5 π²
- D. 128 π²
Show answer
Answer: B — 1280 π²
T = 2π√(I/μB). Time period T = 5/20 = 1/4 s. So 1/4 = 2π√(9.8×10⁻⁶/(μ×0.049)). Solving, μ = 128π² × 10⁻⁴ = 1280π² × 10⁻⁵. So x = 1280π².
- Q5· Dual Nature of Radiation and Matter
If c is the velocity of light in free space, the correct statements about photon among the following are: A. The energy of a photon is E = hν. B. The velocity of a photon is c. C. The momentum of a photon, p = hν/c. D. In a photon-electron collision, both total energy and total momentum are conserved. E. Photon possesses positive charge. Choose the correct answer from the options given below:
- A. A, C and D only
- B. A, B, D and E only
- C. A and B only
- D. A, B, C and D only
Show answer
Answer: D — A, B, C and D only
A photon has energy E=hν (A, true), travels at velocity c (B, true), has momentum p=hν/c (C, true), and in photon-electron collisions both energy and momentum are conserved (D, true). A photon is chargeless/neutral, not positively charged (E, false). So A, B, C and D only.
- Q6· Semiconductor Electronics
The output (Y) of the given logic gate is similar to the output of an/a: [Figure: Input A through a NOT gate, Input B through a NOR gate (with itself), both outputs into a NOR gate giving output Y]
- A. OR gate
- B. AND gate
- C. NAND gate
- D. NOR gate
Show answer
Answer: B — AND gate
Y = NOT(NOT(A) + NOT(B)) = NOT(NOT(A)) · NOT(NOT(B)) = A·B (by De Morgan's theorem), which is the AND gate output.
- Q7· Semiconductor Electronics
Consider the following statements A and B and identify the correct answer: [Graph: I-V axes divided into quadrants I, II, III, IV] A. For a solar-cell, the I-V characteristics lies in the IV quadrant of the given graph. B. In a reverse biased pn junction diode, the current measured in (μA), is due to majority charge carriers.
- A. Both A and B are correct.
- B. Both A and B are incorrect.
- C. A is correct but B is incorrect.
- D. A is incorrect but B is correct.
Show answer
Answer: C — A is correct but B is incorrect.
Statement A is correct - for a solar cell, the I-V characteristic curve lies in the fourth quadrant since it acts as a power source (negative current, positive voltage convention). Statement B is incorrect - the small reverse current in a pn junction diode (in μA) is due to minority charge carriers, not majority charge carriers.
- Q8· Thermodynamics
A thermodynamic system is taken through the cycle abcda. The work done by the gas along the path bc is: [P-V diagram: a(100cm³,100kPa) → b(400cm³,100kPa) → c(400cm³,300kPa) → d(100cm³,300kPa) → a]
- A. -90 J
- B. -60 J
- C. zero
- D. 30 J
Show answer
Answer: C — zero
Along path bc, volume remains constant at 400 cm³ (isochoric process), so work done W = PΔV = 0.
- Q9· Mechanical Properties of Fluids
A thin flat circular disc of radius 4.5 cm is placed gently over the surface of water. If surface tension of water is 0.07 N m⁻¹, then the excess force required to take it away from the surface is:
- A. 1.98 mN
- B. 99 N
- C. 19.8 mN
- D. 198 N
Show answer
Answer: C — 19.8 mN
F = T × 2πr = 0.07 × 2 × 3.14 × 4.5×10⁻² = 19.8 mN.
- Q10· Work, Energy and Power
At any instant of time t, the displacement of any particle is given by 2t - 1 (SI unit) under the influence of force of 5 N. The value of instantaneous power is (in SI unit):
- A. 7
- B. 6
- C. 10
- D. 5
Show answer
Answer: C — 10
x = 2t - 1, so v = dx/dt = 2 m/s (constant). Power P = F·v = 5 × 2 = 10 Watt.
- Q11· Nuclei
²⁹⁰₈₂X →(α) Y →(e⁺) Z →(β⁻) P →(e⁻) Q In the nuclear emission stated above, the mass number and atomic number of the product Q respectively, are:
- A. 288, 82
- B. 286, 81
- C. 280, 81
- D. 286, 80
Show answer
Answer: B — 286, 81
X(290,82) → α decay → Y(286,80) → e⁺ (positron) emission decreases Z by 1 → Z(286,79) → β⁻ decay increases Z by 1 → P(286,80) → e⁻ emission (β⁻-like) increases Z by 1 → Q(286,81). So Q has mass number 286 and atomic number 81.
- Q12· Ray Optics and Optical Instruments
A light ray enters through a right angled prism at point P with the angle of incidence 30° as shown in figure. It travels through the prism parallel to its base BC and emerges along the face AC. The refractive index of the prism is: [Figure: right-angled prism ABC with right angle at A, ray entering at P on AB with 30° incidence, traveling parallel to BC, emerging at AC]
- A. √3/4
- B. √3/2
- C. √5/4
- D. √5/2
Show answer
Answer: D — √5/2
For AB surface: sin30° = μsin(90°-C), so 1/2 = μcosC ...(i). For AC surface (critical angle, grazing emergence): μsinC = 1, so μ = 1/sinC ...(ii). Substituting (ii) into (i): 1/2 = cosC/sinC, so tanC = 2, giving sinC = 2/√5. From (ii): μ = 1/(2/√5) = √5/2.
- Q13· Electromagnetic Induction
In the diagram, a strong bar magnet is moving towards solenoid-2 from solenoid-1. The direction of induced current in solenoid-1 and that in solenoid-2, respectively, are through the directions: [Figure: Solenoid-1 (A-B) and Solenoid-2 (C-D), bar magnet with N-S poles moving from solenoid-1 towards solenoid-2]
- A. AB and CD
- B. BA and DC
- C. AB and DC
- D. BA and CD
Show answer
Answer: C — AB and DC
As the magnet moves away from solenoid-1, by Lenz's law the induced current opposes the decrease in flux, flowing in direction AB. As the magnet approaches solenoid-2, the induced current opposes the increasing flux, flowing in direction DC. So AB and DC.
- Q14· Alternating Current
In an ideal transformer, the turns ratio is Np/Ns = 1/2. The ratio Vs:Vp is equal to (the symbols carry their usual meaning):
- A. 1 : 1
- B. 1 : 4
- C. 1 : 2
- D. 2 : 1
Show answer
Answer: D — 2 : 1
Np/Ns = Vp/Vs. Given Np/Ns = 1/2, so Vp/Vs = 1/2, giving Vs/Vp = 2/1, i.e., Vs:Vp = 2:1.
- Q15· Dual Nature of Radiation and Matter
The graph which shows the variation of (1/λ²) and its kinetic energy E is (where λ is de Broglie wavelength of a free particle): [Four graph options showing different curve shapes of 1/λ² vs E]
- A. Concave down curve through origin (graph 1)
- B. Straight line through origin (graph 2)
- C. Concave up curve through origin (graph 3)
- D. Decreasing hyperbola-like curve (graph 4)
Show answer
Answer: B — Straight line through origin (graph 2)
λ = h/√(2mE), so λ² = h²/(2mE), giving E = h²/(2mλ²), i.e., E ∝ 1/λ². So 1/λ² is directly proportional to E, which is a straight line through the origin (graph 2).
- Q16· Wave Optics
If the monochromatic source in Young's double slit experiment is replaced by white light, then
- A. there will be a central bright white fringe surrounded by a few coloured fringes.
- B. all bright fringes will be of equal width.
- C. interference pattern will disappear.
- D. there will be a central dark fringe surrounded by a few coloured fringes.
Show answer
Answer: A — there will be a central bright white fringe surrounded by a few coloured fringes.
Since the central fringe for all colors (wavelengths) forms at the same central point (zero path difference for all wavelengths), it appears white due to the mixing of all colors. Fringes away from the center, having different path differences, appear coloured since different wavelengths produce maxima at different positions.
- Q17· Electrostatic Potential and Capacitance
Given below are two statements: one is labelled as Assertion A and the other is labelled as Reason R Assertion A: The potential (V) at any axial point, at 2 m distance (r) from the centre of the dipole of dipole moment vector P of magnitude, 4×10⁻⁶ C m, is ±9×10³ V. (Take 1/4πε₀ = 9×10⁹ SI units) Reason R: V = ±2P/(4πε₀r²), where r is the distance of any axial point, situated at 2 m from the centre of the dipole. In the light of the above statements, choose the correct answer from the options given below:
- A. A is true but R is false.
- B. A is false but R is true.
- C. Both A and R are true and R is the correct explanation of A.
- D. Both A and R are true and R is NOT the correct explanation of A.
Show answer
Answer: A — A is true but R is false.
V_axial = ±kp/r² = ±(9×10⁹ × 4×10⁻⁶)/2² = ±9×10³ V, so Assertion A is true. However, the correct formula for axial potential is V = ±p/(4πε₀r²) (without the factor of 2 in numerator for this form, as kp/r² already equals p/(4πε₀r²)), so Reason R (with the extra factor 2P) is false/incorrectly stated.
- Q18· Work, Energy and Power
Two bodies A and B of same mass undergo completely inelastic one dimensional collision. The body A moves with velocity v1 while body B is at rest before collision. The velocity of the system after collision is v2. The ratio v1:v2 is:
- A. 4 : 1
- B. 1 : 4
- C. 1 : 2
- D. 2 : 1
Show answer
Answer: D — 2 : 1
By conservation of momentum: mv1 + 0 = (m+m)v2, so mv1 = 2mv2, giving v1/v2 = 2/1, i.e., v1:v2 = 2:1.
- Q19· Electrostatic Potential and Capacitance
In the following circuit, the equivalent capacitance between terminal A and terminal B is: [Figure: Bridge network with four 2μF capacitors in a square arrangement (top two, bottom two) and one 2μF capacitor as the bridge/middle connection, between terminals A and B]
- A. 0.5 μF
- B. 4 μF
- C. 2 μF
- D. 1 μF
Show answer
Answer: C — 2 μF
This is a balanced Wheatstone-bridge-like capacitor network (all capacitors equal 2μF), so the bridge (middle) capacitor carries no charge and can be removed. The top branch has two 2μF in series = 1μF, and the bottom branch has two 2μF in series = 1μF. These two 1μF are in parallel: 1+1 = 2μF.
- Q20· Units and Measurements
The quantities which have the same dimensions as those of solid angle are:
- A. strain and arc
- B. angular speed and stress
- C. strain and angle
- D. stress and angle
Show answer
Answer: C — strain and angle
Solid angle is dimensionless. Strain = change in configuration/original configuration = dimensionless [M⁰L⁰T⁰]. Angle = arc/radius = L/L = dimensionless [M⁰L⁰T⁰]. So strain and angle both have the same (dimensionless) dimensions as solid angle.
- Q21· Semiconductor Electronics
A logic circuit provides the output Y as per the following truth table: A B Y 0 0 1 0 1 0 1 0 1 1 1 0 The expression for the output Y is:
- A. B̄ (NOT B)
- B. B
- C. A.B + Ā
- D. A.B̄ + Ā
Show answer
Answer: A — B̄ (NOT B)
From the truth table, Y=1 only when B=0 (regardless of A's value: A=0,B=0→Y=1; A=1,B=0→Y=1), and Y=0 when B=1. So Y = B̄ (NOT B), independent of A.
- Q22· Electrostatic Potential and Capacitance
A thin spherical shell is charged by some source. The potential difference between the two points C and P (in V) shown in the figure is: (Take 1/4πε₀ = 9×10⁹ SI units) [Figure: spherical shell of radius R=3cm, q=1μC, C is centre, P is a point on the shell surface]
- A. 0.5 × 10⁵
- B. zero
- C. 3 × 10⁵
- D. 1 × 10⁵
Show answer
Answer: B — zero
For a charged spherical shell, the potential is the same at the centre (C) and at the surface (any point including P on the surface), both equal to kq/R. So VP - VC = 0.
- Q23· Atoms
Given below are two statements: Statement I: Atoms are electrically neutral as they contain equal number of positive and negative charges. Statement II: Atoms of each element are stable and emit their characteristic spectrum. In the light of the above statements, choose the most appropriate answer from the options given below:
- A. Statement I is correct but Statement II is incorrect.
- B. Statement I is incorrect but Statement II is correct.
- C. Both Statement I and Statement II are correct.
- D. Both Statement I and Statement II are incorrect.
Show answer
Answer: C — Both Statement I and Statement II are correct.
Both statements are correct - atoms are electrically neutral due to equal numbers of protons and electrons, and stable atoms of each element emit a characteristic line spectrum.
- Q24· Atoms
Match List I with List II. List I (Spectral Lines of Hydrogen for transitions from): (A) n2=3 to n1=2 (B) n2=4 to n1=2 (C) n2=5 to n1=2 (D) n2=6 to n1=2 List II (Wavelengths (nm)): (I) 410.2 (II) 434.1 (III) 656.3 (IV) 486.1 Choose the correct answer from the options given below:
- A. A-IV, B-III, C-I, D-II
- B. A-I, B-II, C-III, D-IV
- C. A-II, B-I, C-IV, D-III
- D. A-III, B-IV, C-II, D-I
Show answer
Answer: D — A-III, B-IV, C-II, D-I
Using 1/λ = RH(1/n1² - 1/n2²) with RH = 1.09×10⁷ m⁻¹ for the Balmer series (n1=2): n2=3→2 gives λ=656.3nm (III), n2=4→2 gives λ=486.1nm (IV), n2=5→2 gives λ=434.1nm (II), n2=6→2 gives λ=410.2nm (I). So A-III, B-IV, C-II, D-I.
- Q25· Oscillations
If x = 5sin(πt + π/3) m represents the motion of a particle executing simple harmonic motion, the amplitude and time period of motion, respectively, are:
- A. 5 cm, 1 s
- B. 5 m, 1 s
- C. 5 cm, 2 s
- D. 5 m, 2 s
Show answer
Answer: D — 5 m, 2 s
Comparing x = 5sin(πt + π/3) with standard SHM equation x = A sin(ωt + φ): Amplitude A = 5 m, angular frequency ω = π rad/s, so time period T = 2π/ω = 2π/π = 2 s.
- Q26· Magnetism and Matter
Match List-I with List-II List-I (Material): (A) Diamagnetic (B) Ferromagnetic (C) Paramagnetic (D) Non-magnetic List-II (Susceptibility (χ)): (I) χ=0 (II) 0>χ≥-1 (III) χ>>1 (IV) 0<χ<ε (a small positive number) Choose the correct answer from the options given below:
- A. A-III, B-II, C-I, D-IV
- B. A-IV, B-III, C-II, D-I
- C. A-II, B-III, C-IV, D-I
- D. A-II, B-I, C-III, D-IV
Show answer
Answer: C — A-II, B-III, C-IV, D-I
Diamagnetic materials have small negative susceptibility: 0>χ≥-1 (II). Ferromagnetic materials have very large positive susceptibility: χ>>1 (III). Paramagnetic materials have small positive susceptibility: 0<χ<ε (IV). Non-magnetic materials have χ=0 (I). So A-II, B-III, C-IV, D-I.
- Q27· Current Electricity
A wire of length 'l' and resistance 100 Ω is divided into 10 equal parts. The first 5 parts are connected in series while the next 5 parts are connected in parallel. The two combinations are again connected in series. The resistance of this final combination is:
- A. 55 Ω
- B. 60 Ω
- C. 26 Ω
- D. 52 Ω
Show answer
Answer: D — 52 Ω
Each part has resistance 100/10 = 10Ω. First 5 parts in series: Rs = 5×10 = 50Ω. Next 5 parts in parallel: Rp = 10/5 = 2Ω. Final combination (series of the two groups): R_final = Rs + Rp = 50+2 = 52Ω.
- Q28· Current Electricity
The terminal voltage of the battery, whose emf is 10V and internal resistance 1Ω, when connected through an external resistance of 4Ω as shown in the figure is: [Figure: battery 10V with internal resistance 1Ω connected to external resistance 4Ω]
- A. 8 V
- B. 10 V
- C. 4 V
- D. 6 V
Show answer
Answer: A — 8 V
i = E/(R+r) = 10/(4+1) = 2A. Terminal voltage V = E - ir = 10 - 2×1 = 8V.
- Q29· Kinematics
A particle moving with uniform speed in a circular path maintains:
- A. constant velocity but varying acceleration.
- B. varying velocity and varying acceleration.
- C. constant velocity.
- D. constant acceleration.
Show answer
Answer: B — varying velocity and varying acceleration.
In uniform circular motion, the direction of velocity changes continuously even though speed is constant, so velocity is not constant. Centripetal acceleration's direction also keeps changing (always pointing toward center), so acceleration is also not constant - both velocity and acceleration vary in direction.
- Q30· Moving Charges and Magnetism
A tightly wound 100 turns coil of radius 10 cm carries a current of 7 A. The magnitude of the magnetic field at the centre of the coil is (Take permeability of free space as 4π×10⁻⁷ SI units):
- A. 4.4 mT
- B. 44 T
- C. 44 mT
- D. 4.4 T
Show answer
Answer: A — 4.4 mT
B = μ0NI/2R = (4π×10⁻⁷ × 100 × 7)/(2 × 0.1) = 4.4 mT.
- Q31· Units and Measurements
In a vernier calipers, (N+1) divisions of vernier scale coincide with N divisions of main scale. If 1 MSD represents 0.1 mm, the vernier constant (in cm) is:
- A. 100 N
- B. 10 (N+1)
- C. 1/(10N)
- D. 1/(100(N+1))
Show answer
Answer: D — 1/(100(N+1))
L.C. = 1MSD × (b-a)/b where b=N+1 vernier divisions, a=N main divisions. 1MSD = 0.1mm = 0.1/10 cm = 1/100 cm. L.C. = [((N+1)-N)/(N+1)] × 1/100 = 1/(100(N+1)) cm.
- Q32· Wave Optics
An unpolarised light beam strikes a glass surface at Brewster's angle. Then
- A. both the reflected and refracted light will be completely polarised
- B. the reflected light will be completely polarised but the refracted light will be partially polarised
- C. the reflected light will be partially polarised
- D. the refracted light will be completely polarised.
Show answer
Answer: B — the reflected light will be completely polarised but the refracted light will be partially polarised
At Brewster's angle, the reflected light is completely (linearly) polarised, while the refracted (transmitted) light is only partially polarised.
- Q33· Gravitation
The mass of a planet is 1/10th that of the earth and its diameter is half that of the earth. The acceleration due to gravity on that planet is:
- A. 4.9 ms⁻²
- B. 3.92 m s⁻²
- C. 19.6 m s⁻²
- D. 9.8 m s⁻²
Show answer
Answer: B — 3.92 m s⁻²
g' = G(M/10)/(R/2)² = G·M/(10) × 4/R² = (4/10) × GM/R² = (4/10) × g = 0.4 × 9.8 = 3.92 m/s².
- Q34· System of Particles and Rotational Motion
A wheel of a bullock cart is rolling on a level road as shown in the figure below. If its linear speed is v in the direction shown, which one of the following options is correct (P and Q are any highest and lowest points on the wheel respectively)? [Figure: wheel rolling on ground, P at top, Q at bottom, moving with velocity v]
- A. Both the points P and Q move with equal speed.
- B. Point P has zero speed.
- C. Point P moves slower than point Q.
- D. Point P moves faster than point Q.
Show answer
Answer: D — Point P moves faster than point Q.
In pure rolling, the point of contact with the ground (Q, the lowest point) always has zero instantaneous speed, while the topmost point (P) moves with speed 2v (twice the speed of the center). So P moves faster than Q.
- Q35· System of Particles and Rotational Motion
The moment of inertia of a thin rod about an axis passing through its mid-point and perpendicular to the rod is 2400 g cm². The length of the 400 g rod is nearly:
- A. 20.7 cm
- B. 72.0 cm
- C. 8.5 cm
- D. 17.5 cm
Show answer
Answer: C — 8.5 cm
I = ML²/12, so L² = 12I/M = (12×2400)/400 = 72. L = √72 ≈ 8.49 cm ≈ 8.5 cm.
- Q36· Current Electricity
Choose the correct circuit which can achieve the bridge balance. [Four Wheatstone bridge circuits with arms 10Ω, 10Ω, 15Ω, and (5Ω + diode D), each with galvanometer G and battery E/key K, with the diode oriented differently (forward/reverse biased) in each option]
- A. Circuit 1 (diode reverse biased in this orientation)
- B. Circuit 2 (diode reverse biased)
- C. Circuit 3 (diode forward biased)
- D. Circuit 4 (diode reverse biased)
Show answer
Answer: C — Circuit 3 (diode forward biased)
In circuit (3), the diode is forward biased, allowing current to flow, so the Wheatstone bridge can be balanced. For balance: P/Q = R/S, i.e., 10/15 = 10/(5+R_diode), giving R_diode = 10Ω.
- Q37· Electromagnetic Waves
A parallel plate capacitor is charged by connecting it to a battery through a resistor. If I is the current in the circuit, then in the gap between the plates:
- A. displacement current of magnitude equal to I flows in a direction opposite to that of I.
- B. displacement current of magnitude greater than I flows but can be in any direction.
- C. there is no current.
- D. displacement current of magnitude equal to I flows in the same direction as I.
Show answer
Answer: D — displacement current of magnitude equal to I flows in the same direction as I.
By Maxwell's concept of displacement current, the displacement current in the gap between the capacitor plates equals the conduction current I in the circuit and flows in the same direction, maintaining continuity of current.
- Q38· Kinetic Theory
The following graph represents the T-V curves of an ideal gas (where T is the temperature and V the volume) at three pressures P1, P2 and P3 compared with those of Charles's law represented as dotted lines. Then the correct relation is: [Graph: T vs V with three curves labeled P1, P2, P3 from steepest to least steep, all passing through origin]
- A. P2 > P1 > P3
- B. P1 > P2 > P3
- C. P3 > P2 > P1
- D. P1 > P3 > P2
Show answer
Answer: B — P1 > P2 > P3
From ideal gas equation PV=μRT, T/V = P/μR, so slope of T-V graph ∝ P. Since P1 has the steepest slope (shown highest in graph) followed by P2 then P3, P1 > P2 > P3.
- Q39· Oscillations
If the mass of the bob in a simple pendulum is increased to thrice its original mass and its length is made half its original length, then the new time period of oscillation is x/2 times its original time period. Then the value of x is
- A. 2√3
- B. 4
- C. √3
- D. √2
Show answer
Answer: D — √2
T = 2π√(l/g), independent of mass. T/(x/2·T) = √(l/(l/2)) = √2, so 2/x = √2, giving x = 2/√2 = √2.
- Q40· Current Electricity
Two heaters A and B have power rating of 1 kW and 2kW, respectively. Those two are first connected in series and then in parallel to a fixed power source. The ratio of power outputs for these two cases is:
- A. 1 : 2
- B. 2 : 3
- C. 1 : 1
- D. 2 : 9
Show answer
Answer: D — 2 : 9
For resistors (heaters) connected to a fixed voltage source, ratio of series power to parallel power = P1P2/(P1+P2)² = (1×2)/(1+2)² = 2/9 (with P1=1kW, P2=2kW).
- Q41· Electrostatic Potential and Capacitance
If the plates of a parallel plate capacitor connected to a battery are moved close to each other, then A. the charge stored in it, increases. B. the energy stored in it, decreases. C. its capacitance increase. D. the ratio of charge to its potential remains the same. E. the product of charge and voltage increases. Choose the most appropriate answer form the options given below:
- A. B, D and E only
- B. A, B and C only
- C. A, B and E only
- D. A, C and E only
Show answer
Answer: D — A, C and E only
With battery connected (constant V), moving plates closer decreases separation d, so capacitance C=ε0A/d increases (C, true). Since Q=CV and V is constant, Q increases as C increases (A, true). Energy stored = QV/2, so as Q increases with V constant, QV (and hence energy) increases (E, true, and B is false since energy increases not decreases). D is false since Q/V = C which changes (increases), not stays the same. So A, C and E only.
- Q42· Ray Optics and Optical Instruments
A small telescope has an objective of focal length 140 cm and an eye piece of focal length 5.0 cm. The magnifying power of telescope for viewing a distant object is:
- A. 17
- B. 32
- C. 34
- D. 28
Show answer
Answer: D — 28
Magnifying power m = fo/fe = 140/5 = 28.
- Q43· Electromagnetic Induction
A sheet is placed on a horizontal surface in front of a strong magnetic pole. A force is needed to: A. hold the sheet there if it is magnetic. B. hold the sheet there if it is non-magnetic. C. move the sheet away from the pole with uniform velocity if it is conducting. D. move the sheet away from the pole with uniform velocity if it is both, non-conducting and non-polar. Choose the correct statements(s) from the options given below:
- A. A, C and D only
- B. C only
- C. B and D only
- D. A and C only
Show answer
Answer: D — A and C only
A force is needed to hold a magnetic sheet in place since it is attracted to the pole (A, true). Moving a conducting sheet with uniform velocity away from the pole requires force to overcome the opposing force from induced eddy currents (C, true). A non-magnetic sheet needs no holding force (B, false), and a non-conducting, non-polar (non-magnetic) sheet needs no force to move since no eddy currents or magnetic force act on it (D, false). So A and C only.
- Q44· Mechanical Properties of Solids
A metallic bar of Young's modulus, 0.5×10¹¹ N m⁻² and coefficient of linear thermal expansion 10⁻⁵ °C⁻¹, length 1 m and area of cross-section 10⁻³ m² is heated from 0°C to 100°C without expansion or bending. The compressive force developed in it is:
- A. 100×10³ N
- B. 2×10³ N
- C. 5×10³ N
- D. 50×10³ N
Show answer
Answer: D — 50×10³ N
F = YAαΔT = 0.5×10¹¹ × 10⁻³ × 10⁻⁵ × 100 = 50×10³ N.
- Q45· Gravitation
The minimum energy required to launch a satellite of mass m from the surface of earth of mass M and radius R in a circular orbit at an altitude of 2R from the surface of the earth is:
- A. GmM/2R
- B. GmM/3R
- C. 5GmM/6R
- D. 2GmM/3R
Show answer
Answer: C — 5GmM/6R
Total energy on surface = -GMm/R. Total energy in orbit at altitude 2R (orbital radius 3R) = -GMm/(2×3R) = -GMm/6R. Minimum energy required E = (-GMm/6R) - (-GMm/R) = GMm/R - GMm/6R = 5GMm/6R.
- Q46· Alternating Current
A 10μF capacitor is connected to a 210 V, 50Hz source as shown in figure. The peak current in the circuit is nearly (π = 3.14): [Figure: 10μF capacitor connected to 210V, 50Hz AC source]
- A. 1.20 A
- B. 0.35 A
- C. 0.58 A
- D. 0.93 A
Show answer
Answer: D — 0.93 A
Xc = 1/(ωC) = 1/(2π×50×10×10⁻⁶) ≈ 318.5 Ω. Irms = V/Xc = 210/318.5 ≈ 0.66 A. I0 = Irms×√2 ≈ 0.93 A.
- Q47· Magnetism and Matter
An iron bar of length L has magnetic moment M. It is bent at the middle of its length such that the two arms make an angle 60° with each other. The magnetic moment of this new magnet is:
- A. 2M
- B. M/√3
- C. M
- D. M/2
Show answer
Answer: D — M/2
Original magnetic moment M1 = mL = M where m is pole strength per unit length. After bending, each half-arm has length L/2, so new magnetic moment M2 = m(L/2) = M/2 (the resultant for bending at the midpoint such that pole strength is scaled with the half-length, treating it as simply halved since the magnetic moment of each arm is m×L/2, and by vector geometry at 60° the resultant equals M/2 per the given solution).
- Q48· Kinematics
The velocity (v) - time (t) plot of the motion of a body is shown below: [Trapezoidal v-t graph: v increases linearly, constant, then decreases linearly to zero] The acceleration (a) - time(t) graph that best suits this motion is: [Four options showing different a-t graph shapes]
- A. Graph showing positive rectangular pulse then negative rectangular pulse (graph 1)
- B. Graph showing negative rectangle then increasing line (graph 2)
- C. Trapezoidal shape (graph 3)
- D. Increasing then constant positive (graph 4)
Show answer
Answer: A — Graph showing positive rectangular pulse then negative rectangular pulse (graph 1)
Since a = dv/dt = slope of v-t curve: during the rising linear part of v-t, acceleration is a positive constant (rectangular pulse); during the constant velocity part, acceleration is zero; during the falling linear part, acceleration is a negative constant (rectangular pulse below axis). This matches graph (1).
- Q49· Electromagnetic Waves
The property which is not of an electromagnetic wave travelling in free space is that:
- A. they travel with a speed equal to 1/√(μ0ε0)
- B. they originate from charges moving with uniform speed
- C. they are transverse in nature
- D. the energy density in electric field is equal to energy density in magnetic field.
Show answer
Answer: B — they originate from charges moving with uniform speed
Electromagnetic waves are produced by accelerating (not uniformly moving) charges. A charge moving with uniform speed does not radiate EM waves. So option (2) is NOT a correct property of an EM wave.
- Q50· Units and Measurements
A force defined by F = αt² + βt acts on a particle at a given time t. The factor which is dimensionless if α and β are constants, is:
- A. αβt
- B. αβ/t
- C. βt/α
- D. αt/β
Show answer
Answer: D — αt/β
Since F = αt² has dimensions of force, α = MLT⁻²/T² = MLT⁻⁴. Since F = βt has dimensions of force, β = MLT⁻²/T = MLT⁻³. Then αt/β = (MLT⁻⁴ × T)/(MLT⁻³) = MLT⁻³/MLT⁻³ = M⁰L⁰T⁰, which is dimensionless.
Take NEET-style timed mocks with your rank
Full 720-mark mocks, NEET 2024 PYQs and instant analysis. Free for 30 days, no card.
Compare NEET course plans for every class.
Take NEET-style timed mocks with your rank
Full 720-mark mocks, NEET 2024 PYQs and instant analysis. Free for 30 days, no card.
Compare NEET course plans for every class.
Take NEET-style timed mocks with your rank
Full 720-mark mocks, NEET 2024 PYQs and instant analysis. Free for 30 days, no card.
Compare NEET course plans for every class.
Take NEET-style timed mocks with your rank
Full 720-mark mocks, NEET 2024 PYQs and instant analysis. Free for 30 days, no card.
Compare NEET course plans for every class.
More free practice: chapter-wise PYQs · NEET Question of the Day · Readiness Test