30 days FREE from Class 9 to DropperRegister free

NEET 2025 Chemistry Question Paper with Answers

Updated 18 Nov 2026

44 NEET 2025 Chemistry questions with the correct answer and an explanation for each, chapter-wise. Tap “Show answer” under each question. No login needed.

  1. Q1· Structure of Atom

    The ratio of the wavelengths of the light absorbed by a hydrogen atom when it undergoes n=2→n=3 and n=4→n=6 transitions, respectively, is

    • A. 1/36
    • B. 1/16
    • C. 1/9
    • D. 1/4
    Show answer

    Answer: D — 1/4

    Using Rydberg formula 1/λ = RZ²[1/n1²−1/n2²]: for 2→3, 1/λ1 = R[1/4−1/9] = R(5/36). For 4→6, 1/λ2 = R[1/16−1/36] = R(5/144). λ1/λ2 = (5/144)/(5/36) = 36/144 = 1/4.

  2. Q2· Classification of Elements and Periodicity in Properties

    Which of the following statements are true? A. Unlike Ga that has a very high melting point, Cs, has a very low melting point. B. On Pauling scale, the electronegativity values of N and Cl are not the same. C. Ar, K+, Cl−, Ca2+ and S2− are all isoelectronic species. D. The correct order of the first ionization enthalpies of Na, Mg, Al and Si is Si > Al > Mg > Na. E. The atomic radius of Cs is greater than that of Li and Rb. Choose the correct answer from the options given below :

    • A. A, B, and E only
    • B. C and E only
    • C. C and D only
    • D. A, C, and E only
    Show answer

    Answer: B — C and E only

    A is false (Ga has a very low melting point, not high). B is false (EN of N and Cl are both ~3.0 on Pauling scale, essentially the same). C is true (all have 18 electrons). D is false (correct order is Si > Mg > Al > Na). E is true (Cs has the largest radius among alkali metals, greater than Li and Rb). So only C and E are true.

  3. Q3· Qualitative Analysis / Salt Analysis

    Match List I with List II. List I (Ion): A. Co2+, B. Mg2+, C. Pb2+, D. Al3+. List II (Group Number in Cation Analysis): I. Group-I, II. Group-III, III. Group-IV, IV. Group-VI. Choose the correct answer from the options given below:

    • A. A-III, B-IV, C-II, D-I
    • B. A-III, B-IV, C-I, D-II
    • C. A-III, B-II, C-IV, D-I
    • D. A-III, B-II, C-I, D-IV
    Show answer

    Answer: B — A-III, B-IV, C-I, D-II

    Co2+ is in Group-IV (Mn2+, Co2+, Zn2+, Ni2+), Mg2+ is in Group-VI, Pb2+ is in Group-I (Ag+, Hg2²+, Pb2+), Al3+ is in Group-III (Fe3+, Cr3+, Al3+). So A-III, B-IV, C-I, D-II.

  4. Q4· Haloalkanes and Haloarenes

    Predict the major product 'P' in the following sequence of reactions: 1-methylcyclopentene treated with (i) HBr, benzoyl peroxide (ii) KCN (iii) Na(Hg)/C2H5OH

    • A. 2-methylcyclopentyl-CH2NH2 (1,2-disubstituted, methyl and CH2NH2 adjacent)
    • B. 1-methyl-1-(CH2NH2)cyclopentane (both substituents on same carbon)
    • C. 2-methylcyclopentyl-NC (methyl and NC adjacent)
    • D. 1-(NC)-1-(CH3)cyclopentane (both substituents on same carbon)
    Show answer

    Answer: A — 2-methylcyclopentyl-CH2NH2 (1,2-disubstituted, methyl and CH2NH2 adjacent)

    HBr with benzoyl peroxide (peroxide effect) adds anti-Markovnikov, placing Br on the carbon away from the methyl-bearing carbon, giving 2-methylcyclopentyl bromide. KCN does SN2 substitution of Br by CN. Na(Hg)/C2H5OH reduces the nitrile (CN) to CH2NH2. Final product: 2-methylcyclopentyl-CH2NH2.

  5. Q5· Structure of Atom

    Energy and radius of first Bohr orbit of He+ and Li2+ are [Given RH = 2.18×10⁻¹⁸J, a0 = 52.9 pm]

    • A. En(Li2+)=−19.62×10¹⁸J; rn(Li2+)=17.6pm; En(He+)=−8.72×10⁻¹⁸J; rn(He+)=26.4pm
    • B. En(Li2+)=−8.72×10⁻¹⁸J; rn(Li2+)=26.4pm; En(He+)=−19.62×10⁻¹⁸J; rn(He+)=17.6pm
    • C. En(Li2+)=−19.62×10⁻¹⁶J; rn(Li2+)=17.6pm; En(He+)=−8.72×10⁻¹⁶J; rn(He+)=26.4pm
    • D. En(Li2+)=−8.72×10⁻¹⁶J; rn(Li2+)=17.6pm; En(He+)=−19.62×10⁻¹⁶J; rn(He+)=17.6pm
    Show answer

    Answer: A — En(Li2+)=−19.62×10¹⁸J; rn(Li2+)=17.6pm; En(He+)=−8.72×10⁻¹⁸J; rn(He+)=26.4pm

    E = −E0×Z²/n². For Li2+ (Z=3,n=1): E = −2.18×10⁻¹⁸×9 = −19.62×10⁻¹⁸ J. For He+ (Z=2,n=1): E = −2.18×10⁻¹⁸×4 = −8.72×10⁻¹⁸ J. r = r0×n²/Z. For Li2+: r = 52.9/3 = 17.6 pm. For He+: r = 52.9/2 = 26.45 pm.

  6. Q6· Coordination Compounds

    Which of the following are paramagnetic? A. [NiCl4]2−, B. Ni(CO)4, C. [Ni(CN)4]2−, D. [Ni(H2O)6]2+, E. Ni(PPh3)4. Choose the correct answer from the options given below:

    • A. A and C only
    • B. B and E only
    • C. A and D only
    • D. A, D and E only
    Show answer

    Answer: C — A and D only

    [NiCl4]2− is tetrahedral (weak field Cl−, no back pairing), Ni2+ 3d8 configuration has 2 unpaired electrons — paramagnetic. Ni(CO)4 is tetrahedral, Ni(0) 3d10 4s0 after rehybridization — 0 unpaired, diamagnetic. [Ni(CN)4]2− is square planar (strong field CN−, back pairing occurs), 0 unpaired — diamagnetic. [Ni(H2O)6]2+ is octahedral, Ni2+ 3d8 with 2 unpaired electrons — paramagnetic. Ni(PPh3)4 is tetrahedral, Ni(0) 3d10 — diamagnetic. So A and D are paramagnetic.

  7. Q7· The p-Block Elements

    Given below are two statements: Statement I: Like nitrogen that can form ammonia, arsenic can form arsine. Statement II: Antimony cannot form antimony pentoxide. In the light of the above statements, choose the most appropriate answer from the options given below:

    • A. Both Statement I and Statement II are correct
    • B. Both Statement I and Statement II are incorrect
    • C. Statement I is correct but Statement II is incorrect
    • D. Statement I is incorrect but Statement II is correct
    Show answer

    Answer: C — Statement I is correct but Statement II is incorrect

    Statement I is correct: all group 15 elements (N, P, As, Sb, Bi) form hydrides (NH3, PH3, AsH3, SbH3, BiH3). Statement II is incorrect: antimony does form antimony pentoxide (Sb2O5), as all members of the nitrogen family can form pentoxides.

  8. Q8· Classification of Elements and Periodicity in Properties

    Which among the following electronic configurations belong to main group elements? A. Ne 3s¹, B. Ar 3d³4s², C. Kr 4d¹⁰5s²5p⁵, D. Ar 3d¹⁰4s¹, E. Rn 5f⁰6d²7s². Choose the correct answer from the option given below :

    • A. B and E only
    • B. A and C only
    • C. D and E only
    • D. A, C, and D only
    Show answer

    Answer: B — A and C only

    [Ne]3s¹ is s-block (main group). [Ar]3d³4s² is d-block (transition, not main group). [Kr]4d¹⁰5s²5p⁵ is p-block (main group). [Ar]3d¹⁰4s¹ is d-block (transition). [Rn]5f⁰6d²7s² is f/d-block. Main group elements are s and p block, so A and C only.

  9. Q9· Some Basic Concepts of Chemistry

    Dalton's Atomic theory could not explain which of the following?

    • A. Law of conservation of mass
    • B. Law of constant proportion
    • C. Law of multiple proportion
    • D. Law of gaseous volume
    Show answer

    Answer: D — Law of gaseous volume

    Dalton's atomic theory successfully explained the laws of conservation of mass, constant proportion, and multiple proportion, but it could not explain Gay-Lussac's law of gaseous volumes.

  10. Q10· Redox Reactions

    Consider the following compounds: KO2, H2O2 and H2SO4. The oxidation states of the underlined elements (K in KO2, O in H2O2, S in H2SO4) in them are, respectively,

    • A. +1, −1, and +6
    • B. +2, −2, and +6
    • C. +1, −2, and +4
    • D. +4, −4, and +6
    Show answer

    Answer: A — +1, −1, and +6

    In KO2 (potassium superoxide), K is +1. In H2O2 (hydrogen peroxide), O is −1. In H2SO4, S is +6.

  11. Q11· Chemical Kinetics

    If the half-life (t1/2) for a first order reaction is 1 minute, then the time required for 99.9% completion of the reaction is closest to:

    • A. 2 minutes
    • B. 4 minutes
    • C. 5 minutes
    • D. 10 minutes
    Show answer

    Answer: D — 10 minutes

    t1/2 = (2.303/k)log(A0/At). For 50% completion: 1 = (2.303/k)log(100/50). For 99.9% completion: t = (2.303/k)log(100/0.1) = (2.303/k)log(1000). Ratio: t/1 = log(1000)/log(2) = 3/0.301 ≈ 10. So t ≈ 10 minutes.

  12. Q12· Coordination Compounds

    The correct order of the wavelength of light absorbed by the following complexes is: (A) [Co(NH3)6]3+, (B) [Co(CN)6]3−, (C) [Cu(H2O)4]2+, (D) [Ti(H2O)6]3+. Choose the correct answer from the options given below:

    • A. B < D < A < C
    • B. B < A < D < C
    • C. C < D < A < B
    • D. C < A < D < B
    Show answer

    Answer: B — B < A < D < C

    λabs ∝ 1/Δ (crystal field splitting). Δ depends on ligand field strength: CN⁻ > NH3 > H2O. Among the H2O complexes, Δ also depends on metal ion. Ordering by increasing Δ (decreasing λ): B([Co(CN)6]3−, strongest field) < A([Co(NH3)6]3+) < D([Ti(H2O)6]3+) < C([Cu(H2O)4]2+, weakest Δ among these). So wavelength order (inverse): B < A < D < C.

  13. Q13· Hydrocarbons

    Which one of the following compounds can exist as cis-trans isomers?

    • A. Pent-1-ene
    • B. 2-Methylhex-2-ene
    • C. 1,1-Dimethylcyclopropane
    • D. 1,2-Dimethylcyclohexane
    Show answer

    Answer: D — 1,2-Dimethylcyclohexane

    For cis-trans isomerism in a cyclic compound, each ring carbon bearing substituents must have two different groups attached. In 1,2-dimethylcyclohexane, each substituted carbon bears a CH3, an H, and two different ring paths, allowing cis (same side) and trans (opposite side) arrangements. Pent-1-ene (terminal alkene) and 1,1-dimethylcyclopropane (geminal substitution) cannot show cis-trans isomerism; 2-methylhex-2-ene has two identical groups on one carbon.

  14. Q14· Equilibrium

    Phosphoric acid ionizes in three steps with their ionization constant values Ka1, Ka2 and Ka3 respectively, while K is the overall ionization constant. Which of the following statements are true? A. logK = logKa1+logKa2+logKa3. B. H3PO4 is a stronger acid than H2PO4− and HPO4²−. C. Ka1 > Ka2 > Ka3. D. Ka1 = (Ka3+Ka2)/2. Choose the correct answer from the options given below:

    • A. A and B only
    • B. A and C only
    • C. B, C and D only
    • D. A, B and C only
    Show answer

    Answer: D — A, B and C only

    Overall K = Ka1×Ka2×Ka3, so logK = logKa1+logKa2+logKa3 (A is true). Successive ionization becomes progressively harder due to increasing negative charge, so H3PO4 is the strongest acid among the three species and Ka1 > Ka2 > Ka3 (B and C are true). D is a fabricated/incorrect relation. So A, B and C only.

  15. Q15· Hydrocarbons

    Which one of the following reactions does NOT give benzene as the product? (1) sodium benzoate + sodalime, Δ; (2) n-hexane with Mo2O3 catalyst at 773K, 10-20 atm; (3) acetylene (HC≡CH) through red hot iron tube at 873K; (4) benzene diazonium chloride with H2O, warm

    • A. sodium benzoate + sodalime, Δ
    • B. n-hexane with Mo2O3 catalyst (aromatization)
    • C. acetylene through red hot iron tube (cyclic trimerization)
    • D. benzene diazonium chloride + H2O, warm
    Show answer

    Answer: D — benzene diazonium chloride + H2O, warm

    Reactions (1), (2), (3) all produce benzene: decarboxylation of sodium benzoate, catalytic aromatization/dehydrogenation of n-hexane, and cyclic trimerization of acetylene. Reaction (4), benzene diazonium chloride with warm water, undergoes hydrolysis to give phenol (C6H5OH), not benzene.

  16. Take NEET-style timed mocks with your rank

    Full 720-mark mocks, NEET 2025 PYQs and instant analysis. Free for 30 days, no card.

    Compare NEET course plans for every class.

    Start free
  17. Q16· Electrochemistry

    If the molar conductivity (Λm) of a 0.050 mol L⁻¹ solution of a monobasic weak acid is 90 S cm² mol⁻¹, its extent (degree) of dissociation will be [Assume Λ°+ = 349.6 Scm² mol⁻¹ and Λ°− = 50.4 Scm² mol⁻¹.]

    • A. 0.115
    • B. 0.125
    • C. 0.225
    • D. 0.215
    Show answer

    Answer: C — 0.225

    α = Λm/Λ°m = 90/(349.6+50.4) = 90/400 = 0.225.

  18. Q17· Chemical Bonding and Molecular Structure

    Given below are two statements: Statement I: A hypothetical diatomic molecule with bond order zero is quite stable. Statement II: As bond order increases, the bond length increases. In the light of the above statements, choose the most appropriate answer from the options given below :

    • A. Both Statement I and Statement II are true
    • B. Both Statement I and Statement II are false
    • C. Statement I is true but Statement II is false
    • D. Statement I is false but Statement II is true
    Show answer

    Answer: B — Both Statement I and Statement II are false

    Statement I is false: a bond order of zero means the molecule does not exist/is not stable (e.g., He2). Statement II is false: as bond order increases, bond length actually decreases (bonds become stronger and shorter), not increases. Both statements are false.

  19. Q18· Coordination Compounds

    Out of the following complex compounds, which of the compound will be having the minimum conductance in solution? (1) [Co(NH3)3Cl3], (2) [Co(NH3)4Cl2], (3) [Co(NH3)6]Cl3, (4) [Co(NH3)5Cl]Cl

    • A. [Co(NH3)3Cl3]
    • B. [Co(NH3)4Cl2]
    • C. [Co(NH3)6]Cl3
    • D. [Co(NH3)5Cl]Cl
    Show answer

    Answer: A — [Co(NH3)3Cl3]

    Minimum conductance means minimum number of ions in solution. [Co(NH3)3Cl3] is a neutral complex (all Cl in coordination sphere) and does not ionize at all, giving zero ions — minimum conductance.

  20. Q19· The p-Block Elements

    Match List - I with List - II. List-I: A. XeO3, B. XeF2, C. XeOF4, D. XeF6. List-II: I. sp³d; linear, II. sp³; pyramidal, III. sp³d³; distorted octahedral, IV. sp³d²; square Pyramidal. Choose the correct answer from the options given below:

    • A. A-II, B-I, C-IV, D-III
    • B. A-II, B-I, C-III, D-IV
    • C. A-IV, B-II, C-III, D-I
    • D. A-IV, B-II, C-I, D-III
    Show answer

    Answer: A — A-II, B-I, C-IV, D-III

    XeO3 is sp³ hybridized, pyramidal (II). XeF2 is sp³d, linear (I). XeOF4 is sp³d², square pyramidal (IV). XeF6 is sp³d³, distorted octahedral (III). So A-II, B-I, C-IV, D-III.

  21. Q20· Thermodynamics

    C(s)+2H2(g)→CH4(g); ΔH=−74.8 kJ mol⁻¹. Which of the following diagrams gives an accurate representation of the above reaction? [R → reactants; P → products]

    • A. R at lower energy than P, with 74.8 gap marked between the peak and the trough above P (R below P, hump between)
    • B. R at lower energy, P at higher energy, 74.8 marked near P at top
    • C. R at a level, P below R by 74.8, hump in between (R higher starting point, correct exothermic drop)
    • D. R at lower energy than P with hump, 74.8 near P
    Show answer

    Answer: C — R at a level, P below R by 74.8, hump in between (R higher starting point, correct exothermic drop)

    Since the reaction is exothermic (ΔH negative), products (P) must be at lower energy than reactants (R), with an activation energy hump in between, and the 74.8 kJ/mol gap representing the energy difference between R and P (reactants higher, products 74.8 kJ/mol lower).

  22. Q21· Solutions

    Match List - I with List - II. List-I (Example): A. Humidity, B. Alloys, C. Amalgams, D. Smoke. List-II (Type of Solution): I. Solid in solid, II. Liquid in gas, III. Solid in gas, IV. Liquid in solid. Choose the correct answer from the options given below:

    • A. A-II, B-IV, C-I, D-III
    • B. A-II, B-I, C-IV, D-III
    • C. A-III, B-I, C-IV, D-II
    • D. A-III, B-II, C-I, D-IV
    Show answer

    Answer: B — A-II, B-I, C-IV, D-III

    Humidity = water vapour in air = liquid in gas (II). Alloys = solid in solid (I). Amalgams = mercury with metal = liquid in solid (IV). Smoke = solid particles in gas = solid in gas (III). So A-II, B-I, C-IV, D-III.

  23. Q22· Amines

    The correct order of decreasing basic strength of the given amines is : N-methylaniline, benzenamine, ethanamine, N-ethylethanamine

    • A. N-methylaniline > benzenamine > ethanamine > N-ethylethanamine
    • B. N-ethylethanamine > ethanamine > benzenamine > N-methylaniline
    • C. N-ethylethanamine > ethanamine > N-methylaniline > benzenamine
    • D. benzenamine > ethanamine > N-methylaniline > N-ethylethanamine
    Show answer

    Answer: C — N-ethylethanamine > ethanamine > N-methylaniline > benzenamine

    Aliphatic amines are more basic than aromatic amines due to +I effect without resonance delocalization of lone pair. Among aliphatic amines, secondary (diethylamine) > primary (ethanamine). Among aromatic amines, N-methylaniline (secondary, +I from methyl) is more basic than benzenamine (aniline, primary). Order: N-ethylethanamine > ethanamine > N-methylaniline > benzenamine.

  24. Q23· Some Basic Concepts of Chemistry

    Among the following, choose the ones with equal number of atoms. A. 212 g of Na2CO3(s) [molar mass=106 g]. B. 248 g of Na2O(s) [molar mass=62 g]. C. 240 g of NaOH(s) [molar mass=40 g]. D. 12 g of H2(g) [molar mass=2 g]. E. 220 g of CO2(g) [molar mass=44g]. Choose the correct answer from the options given below:

    • A. A, B, and C only
    • B. A, B, and D only
    • C. B, C, and D only
    • D. B, D, and E only
    Show answer

    Answer: B — A, B, and D only

    A: 212/106=2 mol Na2CO3 × 6 atoms = 12 mol atoms. B: 248/62=4 mol Na2O × 3 atoms = 12 mol atoms. C: 240/40=6 mol NaOH × 3 atoms = 18 mol atoms (different). D: 12/2=6 mol H2 × 2 atoms = 12 mol atoms. E: 220/44=5 mol CO2 × 3 atoms = 15 mol atoms (different). So A, B, and D have equal (12 mol) atoms.

  25. Q24· Biomolecules

    Match List - I with List - II. List-I (Name of Vitamin): A. Vitamin B12, B. Vitamin D, C. Vitamin B2, D. Vitamin B6. List-II (Deficiency disease): I. Cheilosis, II. Convulsions, III. Rickets, IV. Pernicious anaemia. Choose the correct answer from the options given below :

    • A. A-I, B-III, C-II, D-IV
    • B. A-IV, B-III, C-I, D-II
    • C. A-II, B-III, C-I, D-IV
    • D. A-IV, B-III, C-II, D-I
    Show answer

    Answer: B — A-IV, B-III, C-I, D-II

    Vitamin B12 deficiency causes pernicious anaemia (IV). Vitamin D deficiency causes rickets (III). Vitamin B2 deficiency causes cheilosis (I). Vitamin B6 deficiency causes convulsions (II). So A-IV, B-III, C-I, D-II.

  26. Q25· Aldehydes, Ketones and Carboxylic Acids

    The correct order of decreasing acidity of the following aliphatic acids is : HCOOH, CH3COOH, (CH3)2CHCOOH, (CH3)3CCOOH

    • A. (CH3)3CCOOH > (CH3)2CHCOOH > CH3COOH > HCOOH
    • B. CH3COOH > (CH3)2CHCOOH > (CH3)3CCOOH > HCOOH
    • C. HCOOH > CH3COOH > (CH3)2CHCOOH > (CH3)3CCOOH
    • D. HCOOH > (CH3)3CCOOH > (CH3)2CHCOOH > CH3COOH
    Show answer

    Answer: C — HCOOH > CH3COOH > (CH3)2CHCOOH > (CH3)3CCOOH

    Acidity decreases as the +I (electron-donating) effect of alkyl groups increases, since more alkyl substitution destabilizes the carboxylate anion. HCOOH (no alkyl group) is most acidic, followed by CH3COOH, then (CH3)2CHCOOH, then (CH3)3CCOOH (most alkyl substitution, least acidic).

  27. Q26· The d- and f-Block Elements

    Given below are two statements: Statement I: Ferromagnetism is considered as an extreme form of paramagnetism. Statement II: The number of unpaired electrons in a Cr2+ ion (Z=24) is the same as that of a Nd3+ ion (Z=60). In the light of the above statements, choose the correct answer from the options given below:

    • A. Both Statement I and Statement II are true
    • B. Both Statement I and Statement II are false
    • C. Statement I is true but Statement II is false
    • D. Statement I is false but Statement II is true
    Show answer

    Answer: C — Statement I is true but Statement II is false

    Statement I is true: ferromagnetism is indeed considered an extreme form of paramagnetism. Statement II is false: Cr2+ has configuration [Ar]3d4, giving 4 unpaired electrons, while Nd3+ has [Xe]4f3, giving 3 unpaired electrons — these are not the same.

  28. Q27· Some Basic Concepts of Chemistry

    Match List - I with List - II. List-I (Mixture): A. CHCl3 + C6H5NH2, B. Curde oil in petroleum industry, C. Glycerol from spent-lye, D. Aniline - water. List-II (Method of Separation): I. Distillation under reduced pressure, II. Steam distillation, III. Fractional distillation, IV. Simple distillation. Choose the correct answer from the options given below :

    • A. A-IV, B-III, C-I, D-II
    • B. A-IV, B-III, C-II, D-I
    • C. A-III, B-IV, C-I, D-II
    • D. A-III, B-IV, C-II, D-I
    Show answer

    Answer: A — A-IV, B-III, C-I, D-II

    CHCl3+C6H5NH2 (different boiling points, no decomposition risk) → simple distillation (IV). Crude oil in petroleum industry → fractional distillation (III). Glycerol from spent-lye (high boiling, decomposes at high temp) → distillation under reduced pressure (I). Aniline-water (aniline is high boiling, steam volatile) → steam distillation (II). So A-IV, B-III, C-I, D-II.

  29. Q28· Equilibrium

    For the reaction A(g)⇌2B(g), the backward reaction rate constant is higher than the forward reaction rate constant by a factor of 2500, at 1000 K. [Given: R = 0.0831 L atm mol⁻¹ K⁻¹] KP for the reaction at 1000 K is

    • A. 83.1
    • B. 2.077×10⁵
    • C. 0.033
    • D. 0.021
    Show answer

    Answer: C — 0.033

    Kc = kf/kb = 1/2500. Kp = Kc(RT)^Δng, with Δng = 2−1 = 1. Kp = (1/2500)×(0.0831×1000)^1 = (1/2500)×83.1 = 0.03324 ≈ 0.033.

  30. Q29· Amines

    Given below are two statements: Statement I: Benzenediazonium salt is prepared by the reaction of aniline with nitrous acid at 273-278 K. It decomposes easily in the dry state. Statement II: Insertion of iodine into the benzene ring is difficult and hence iodobenzene is prepared through the reaction of benzenediazonium salt with KI. In the light of the above statements, choose the most appropriate answer from the options given below :

    • A. Both Statement I and Statement II are correct
    • B. Both Statement I and Statement II are incorrect
    • C. Statement I is correct but Statement II is incorrect
    • D. Statement I is incorrect but Statement II is correct
    Show answer

    Answer: A — Both Statement I and Statement II are correct

    Both statements are correct: benzenediazonium salt is indeed prepared from aniline + NaNO2/HCl at 273-278K and is unstable/decomposes in dry form; and direct iodination of benzene is difficult, so iodobenzene is made via the Sandmeyer-type reaction of the diazonium salt with KI.

  31. Q30· Haloalkanes and Haloarenes

    How many products (including stereoisomers) are expected from monochlorination of 2-methylbutane (H3C)2CH-CH2-CH3?

    • A. 2
    • B. 3
    • C. 5
    • D. 6
    Show answer

    Answer: D — 6

    Monochlorination of 2-methylbutane at different positions: C1/C1' (two equivalent terminal methyls on the isopropyl part, 1 product), C2 (chiral centre created, giving a racemic pair - but counted structurally as 1 position with a new stereocenter giving 2 stereoisomers since it becomes chiral), C3 (chiral centre, 2 stereoisomers), and C4 (1 product). Total structural+stereo count = 6.

  32. Take NEET-style timed mocks with your rank

    Full 720-mark mocks, NEET 2025 PYQs and instant analysis. Free for 30 days, no card.

    Compare NEET course plans for every class.

    Start free
  33. Q31· Hydrocarbons

    Among the given compounds I-III, the correct order of bond dissociation energy of the C-H bond marked with * is: I. Phenyl C-H (aromatic), II. Phenylacetylene terminal C-H (Ph-C≡C-H), III. Cyclopropyl C-H.

    • A. II > I > III
    • B. I > II > III
    • C. III > II > I
    • D. II > III > I
    Show answer

    Answer: A — II > I > III

    Bond dissociation energy relates inversely to the stability of the radical formed. sp-hybridized vinyl/alkynyl radical (II, from Ph-C≡C-H) is the least stable, so its BDE is highest. The aryl radical (I) is also quite unstable (high BDE) due to sp2 character, more stable than the alkynyl one's radical being even less stable makes BDE(II) highest. Cyclopropyl radical (III) is comparatively more stabilized (sp3, with some s-character effects), giving lowest BDE. Order: II > I > III.

  34. Q32· Hydrocarbons

    Which one of the following compounds does not decolourize bromine water? (1) Cyclohexane, (2) Phenol, (3) Styrene (C6H5-CH=CH2), (4) Aniline (C6H5-NH2)

    • A. Cyclohexane
    • B. Phenol
    • C. Styrene
    • D. Aniline
    Show answer

    Answer: A — Cyclohexane

    Cyclohexane is a saturated cyclic hydrocarbon with no π bond, so it does not react with (decolourize) bromine water. Phenol and aniline undergo electrophilic substitution (bromination) due to ring activation, and styrene's C=C reacts by addition — all three decolourize bromine water.

  35. Q33· Aldehydes, Ketones and Carboxylic Acids

    The major product of the following reaction is: Ph-CO-CH2-CH2-CN treated with (i) CH3MgBr (excess) (ii) H3O+

    • A. Ph-C(CH3)(OH)-CH2-CN (Grignard adds only to nitrile, ketone untouched)
    • B. Ph-C(CH3)(OH)-CH2-CH2-CO-CH3 (Grignard adds to both ketone and nitrile, nitrile converted to methyl ketone after hydrolysis)
    • C. Ph-CH(CH3)-OH...C(CH3)2-OH (double addition at both carbons, no selectivity)
    • D. Ph-CO-CH2-CH2-CO-CH3 (nitrile converted to ketone, original ketone untouched)
    Show answer

    Answer: B — Ph-C(CH3)(OH)-CH2-CH2-CO-CH3 (Grignard adds to both ketone and nitrile, nitrile converted to methyl ketone after hydrolysis)

    Excess CH3MgBr first adds to the more electrophilic ketone carbonyl, forming a tertiary alkoxide with a pendant nitrile; the nitrile then also reacts with the Grignard reagent to form a magnesium ketimine salt. Aqueous acidic workup (H3O+) hydrolyzes the ketimine to a methyl ketone and protonates the alkoxide to a tertiary alcohol, giving Ph-C(CH3)(OH)-CH2-CH2-CO-CH3.

  36. Q34· Solutions

    Which of the following aqueous solution will exhibit highest boiling point? (1) 0.01 M Urea, (2) 0.01 M KNO3, (3) 0.01 M Na2SO4, (4) 0.015 M C6H12O6

    • A. 0.01 M Urea
    • B. 0.01 M KNO3
    • C. 0.01 M Na2SO4
    • D. 0.015 M C6H12O6
    Show answer

    Answer: C — 0.01 M Na2SO4

    ΔTb = i×Kf×m, so ΔTb ∝ i×m (effective particle concentration). Urea: i=1, m=0.01 → 0.01. KNO3: i=2, m=0.01 → 0.02. Na2SO4: i=3, m=0.01 → 0.03 (highest). Glucose: i=1, m=0.015 → 0.015. Na2SO4 gives the highest i×m, hence highest boiling point.

  37. Q35· The d- and f-Block Elements

    Match List - I with List - II. List-I: A. Haber process, B. Wacker oxidation, C. Wilkinson catalyst, D. Ziegler catalyst. List-II: I. Fe catalyst, II. PbCl2, III. [(PPh3)3RhCl], IV. TiCl4 with Al(CH3)3. Choose the correct answer from the options given below :

    • A. A-I, B-II, C-IV, D-III
    • B. A-II, B-III, C-I, D-IV
    • C. A-I, B-II, C-III, D-IV
    • D. A-I, B-IV, C-III, D-II
    Show answer

    Answer: C — A-I, B-II, C-III, D-IV

    Haber process uses Fe catalyst (I). Wacker oxidation uses PdCl2 (listed as PbCl2 here, I believe a typo for PdCl2) (II). Wilkinson catalyst is [(PPh3)3RhCl] (III). Ziegler-Natta catalyst is TiCl4 with Al(CH3)3/AlEt3 (IV). So A-I, B-II, C-III, D-IV.

  38. Q36· Solutions

    5 moles of liquid X and 10 moles of liquid Y make a solution having a vapour pressure of 70 torr. The vapour pressures of pure X and Y are 63 torr and 78 torr respectively. Which of the following is true regarding the described solution?

    • A. The solution shows positive deviation.
    • B. The solution shows negative deviation.
    • C. The solution is ideal.
    • D. The solution has volume greater than the sum of individual volumes.
    Show answer

    Answer: B — The solution shows negative deviation.

    Theoretical (ideal) vapour pressure Ps = XA·PA° + XB·PB° = 63×(5/15)+78×(10/15) = 21+52 = 73 torr. Observed vapour pressure (70 torr) < theoretical (73 torr), indicating negative deviation from Raoult's law.

  39. Q37· Biomolecules

    Sugar 'X': A. is found in honey. B. is a keto sugar. C. exists in α and β anomeric forms. D. is laevorotatory. 'X' is :

    • A. D-Glucose
    • B. D-Fructose
    • C. Maltose
    • D. Sucrose
    Show answer

    Answer: B — D-Fructose

    Among the options, only D-Fructose is a keto sugar (ketohexose), is found abundantly in honey, exists in α/β anomeric forms, and is laevorotatory (also called levulose).

  40. Q38· Aldehydes, Ketones and Carboxylic Acids

    Identify the suitable reagent for the following conversion: Methyl benzoate (PhCOOCH3) to benzaldehyde (PhCHO).

    • A. (i) LiAlH4, (ii) H+/H2O
    • B. (i) AlH(iBu)2 [DIBAL-H], (ii) H2O
    • C. (i) NaBH4, (ii) H+/H2O
    • D. H2/Pd-BaSO4
    Show answer

    Answer: B — (i) AlH(iBu)2 [DIBAL-H], (ii) H2O

    DIBAL-H (diisobutylaluminium hydride) is a mild reducing agent that partially reduces esters to aldehydes at low temperature, stopping at the aldehyde stage before over-reduction to alcohol. LiAlH4 would over-reduce the ester all the way to the alcohol.

  41. Q39· Thermodynamics

    The standard heat of formation, in kcal/mol of Ba2+ is : [Given: standard heat of formation SO4²⁻ ion (aq) = −216 kcal/mol, standard heat of crystallisation of BaSO4(s) = −4.5 kcal/mol, standard heat of formation of BaSO4(s) = −349 kcal/mol]

    • A. −128.5
    • B. −133.0
    • C. +133.0
    • D. +220.5
    Show answer

    Answer: A — −128.5

    Ba2+(aq)+SO4²⁻(aq)→BaSO4(s), ΔH(crystallisation) = −4.5 kcal. ΔH(cre.) = ΔHf(BaSO4) − ΔHf(Ba2+) − ΔHf(SO4²⁻). −4.5 = −349 − x − (−216) ⟹ −4.5 = −349 − x + 216 ⟹ x = −128.5 kcal/mol.

  42. Q40· Alcohols, Phenols and Ethers

    Total number of possible isomers (both structural as well as stereoisomers) of cyclic ethers of molecular formula C4H8O is :

    • A. 6
    • B. 8
    • C. 10
    • D. 11
    Show answer

    Answer: C — 10

    Cyclic ethers with formula C4H8O include: oxetane derivatives (4-membered ring with O) and epoxide derivatives (3-membered ring with O + extra carbons), and tetrahydrofuran. Counting all structural isomers plus their stereoisomers (cis/trans and enantiomers where applicable) gives a total of 10 isomers.

  43. Q41· Chemical Bonding and Molecular Structure

    Identify the correct orders against the property mentioned: A. H2O > NH3 > CHCl3 – dipole moment. B. XeF4 > XeO3 > XeF2 – number of lone pairs on central atom. C. O–H > C–H > N–O – bond length. D. N2 > O2 > H2 – bond enthalpy. Choose the correct answer from the options given below:

    • A. A, D only
    • B. B, D only
    • C. A, C only
    • D. B, C only
    Show answer

    Answer: A — A, D only

    A is correct: dipole moments H2O(1.85D) > NH3(1.47D) > CHCl3(1.04D). B is incorrect: lone pairs are XeF4(2) = XeF2(3)... actual order differs (XeF2 has 3 lone pairs, XeF4 has 2, XeO3 has 1), so stated order is wrong. C is incorrect bond length order stated. D is correct: bond enthalpy N2(941) > O2(498) > H2(436) kJ/mol (triple bond strongest). So A, D only.

  44. Q42· Equilibrium

    Higher yield of NO in N2(g)+O2(g)⇌2NO(g) can be obtained at [ΔH of the reaction = +180.7 kJ mol⁻¹]: A. higher temperature, B. lower temperature, C. higher concentration of N2, D. higher concentration of O2. Choose the correct answer from the options given below:

    • A. A, D only
    • B. B, C only
    • C. B, C, D only
    • D. A, C, D only
    Show answer

    Answer: D — A, C, D only

    Since the reaction is endothermic (ΔH positive), by Le Chatelier's principle, higher temperature favors the forward reaction (more NO). Increasing concentration of either reactant (N2 or O2) also shifts equilibrium forward. So A, C, D only.

  45. Q43· Chemical Kinetics

    If the rate constant of a reaction is 0.03s⁻¹, how much time does it take for 7.2 mol L⁻¹ concentration of the reactant to get reduced to 0.9 mol L⁻¹? (Given: log 2 = 0.301)

    • A. 69.3 s
    • B. 23.1 s
    • C. 210 s
    • D. 21.0 s
    Show answer

    Answer: A — 69.3 s

    t = (2.303/k)log(A0/At) = (2.303/0.03)log(7.2/0.9) = (2.303/0.03)log(8) = (2.303/0.03)×3log2 = (2.303/0.03)×0.903 ≈ 69.3 s.

  46. Q44· Qualitative Analysis / Organic Chemistry

    Which one of the following reactions does NOT belong to "Lassaigne's test"? (1) Na+C+N→NaCN (Δ), (2) 2Na+S→Na2S (Δ), (3) Na+X→NaX (Δ), (4) 2CuO+C→2Cu+CO2 (Δ)

    • A. Na+C+N→NaCN (Δ)
    • B. 2Na+S→Na2S (Δ)
    • C. Na+X→NaX (Δ)
    • D. 2CuO+C→2Cu+CO2 (Δ)
    Show answer

    Answer: D — 2CuO+C→2Cu+CO2 (Δ)

    Lassaigne's test involves fusing an organic compound with sodium metal to convert N, S, halogens into detectable sodium salts (NaCN, Na2S, NaX). The reaction 2CuO+C→2Cu+CO2 is unrelated to this extraction process (it's a redox/combustion-type reaction), so it does not belong to Lassaigne's test.

Take NEET-style timed mocks with your rank

Full 720-mark mocks, NEET 2025 PYQs and instant analysis. Free for 30 days, no card.

Compare NEET course plans for every class.

Start free

More free practice: chapter-wise PYQs · NEET Question of the Day · Readiness Test