30 days FREE from Class 9 to DropperRegister free

NEET 2026 Physics Question Paper with Answers

Updated 18 Nov 2026

90 NEET 2026 Physics questions with the correct answer and an explanation for each, chapter-wise. Tap “Show answer” under each question. No login needed.

  1. Q1· Kinetic Theory

    An ideal gas is made of polyatomic molecules. Each of the molecules has three translational, three rotational and f number of vibrational modes. If the ratio of heat capacities Cp/Cv of the gas is 8/7, then the value of f is:

    • A. 3
    • B. 2
    • C. 1
    • D. 4
    Show answer

    Answer: D — 4

    Total degrees of freedom = 3 (translational) + 3 (rotational) + 2f (each vibrational mode contributes 2, for kinetic and potential energy). gamma = Cp/Cv = 1 + 2/(degrees of freedom) = 8/7, so 2/(dof) = 1/7, giving dof = 14. So 3+3+2f = 14, 2f = 8, f = 4.

  2. Q2· Units and Measurements

    One main scale division of a Vernier calliper is equal to 1 mm and the number of divisions on the Vernier scale is 10. When both the jaws touch each other, the Vernier scale shifts to the left of zero of the main scale in such a way that the 4th Vernier division coincides with a division of the main scale. If this Vernier calliper measures the length of a wire to be 1 cm, the actual length of the wire is:

    • A. 0.96 cm
    • B. 1.00 cm
    • C. 1.04 cm
    • D. 0.60 cm
    Show answer

    Answer: C — 1.04 cm

    Least count = 1 MSD - 1 VSD = 1mm - 0.9mm = 0.1mm = 0.01cm. Since the vernier zero is shifted to the left of the main scale zero with the 4th division coinciding, this is a negative zero error of magnitude 4 x 0.01cm = 0.04cm. Actual length = Observed reading - (Zero error) = 1cm - (-0.04cm) = 1.04cm. Note: this question was officially marked as Bonus (full credit given to all candidates) likely due to ambiguity in the zero-error sign convention used.

  3. Q3· Semiconductor Electronics

    Three identical p-n junction diodes D1, D2 and D3 are connected across a 5V battery with their respective 1kOhm resistors in a circuit as shown (D1 and its resistor in one branch, D2 and its resistor in a second parallel branch, D3 and its resistor in a third parallel branch, with D3 oriented in reverse relative to D1 and D2). If the width of the depletion regions of D1, D2 and D3 are W1, W2 and W3, respectively, then the correct option is:

    • A. W3 = W1 > W2
    • B. W3 > W2 > W1
    • C. W2 > W1 = W3
    • D. W1 > W2 > W3
    Show answer

    Answer: B — W3 > W2 > W1

    D1 and D2 are forward biased in the circuit (current flows through them, reducing their depletion region width), while D3 is reverse biased (increasing its depletion region width). Due to the differing branch configurations and resistances, the forward bias across D2 is less than that of D1, leading to depletion width ordering W3 > W2 > W1, with D3 (reverse biased) having the widest depletion region.

  4. Q4· Oscillations

    Consider a spring-mass simple harmonic oscillator in one dimension. The mass of the particle is m kg and the spring constant is k Nm^-1. At a given instant, the extension of the spring is x meter and the speed of the particle is v ms^-1. On the x-v plane, if the graph of v as a function of x is a circle, then the correct option is:

    • A. k = m
    • B. k = m^2
    • C. k = sqrt(m)
    • D. k = 1/m
    Show answer

    Answer: A — k = m

    For SHM, v^2 = (k/m)(A^2 - x^2), i.e., v^2 + (k/m)x^2 = (k/m)A^2. Dividing through, x^2/A^2 + v^2/((k/m)A^2) = 1, an ellipse in the x-v plane. For this to be a circle, the coefficients of x^2 and v^2 must be equal, i.e., k/m = 1, so k = m.

  5. Q5· Electromagnetic Waves

    An electromagnetic wave travelling in a lossless dielectric medium having a dielectric constant, epsilon_r = 9, has the electric field, Ex = E0 sin(kz - 2*pi*10^6 t) V/m, where E0 is the amplitude and k is the wave vector. Among the following options, the INCORRECT choice(s) is/are: (1) The wavelength of the electromagnetic wave inside the medium is 300 m. (2) The magnetic field is given by the relation By = (B0/v) sin(kz - 2*pi*10^6 t), where v is the speed of the electromagnetic wave inside the medium. (3) The direction of propagation of the electromagnetic wave is along +z. (4) The speed of the electromagnetic wave inside the medium is 10^8 m/s.

    • A. Statement (1) only
    • B. Statement (2) only
    • C. Statements (1) and (2)
    • D. Statements (3) and (4)
    Show answer

    Answer: C — Statements (1) and (2)

    Refractive index n = sqrt(epsilon_r) = 3, so speed in medium v = c/n = 10^8 m/s (statement 4 is correct). Frequency f = 10^6 Hz, so wavelength = v/f = 10^8/10^6 = 100 m, NOT 300 m, making statement (1) incorrect. The wave travels in the +z direction (statement 3 is correct). The correct relation for the magnetic field amplitude is B0 = E0/v, so the field should be written as By = (E0/v) sin(...), not (B0/v) sin(...) which is dimensionally inconsistent as stated, making statement (2) also incorrect. So both (1) and (2) are the incorrect choices (officially marked as a multi-select answer '1, 2').

  6. Q6· Laws of Motion

    A frictionless circular wire of unit radius is fixed on the horizontal plane. Two point particles of unit mass start moving simultaneously from point A (theta = pi/2) with identical uniform angular speeds in opposite directions, and meet again at point B (theta = -pi/2). During this time, which of the following figures schematically represents the magnitude of the total linear momentum P of the system, as a function of theta?

    • A. A curve that dips to zero in the middle (V-shaped/cusped) between pi/2 and -pi/2
    • B. A smooth dome-shaped curve (rises from zero, peaks in the middle, returns to zero) between pi/2 and -pi/2
    • C. A straight line decreasing linearly from a maximum to zero between pi/2 and -pi/2
    • D. A roughly constant (flat) line between pi/2 and -pi/2
    Show answer

    Answer: B — A smooth dome-shaped curve (rises from zero, peaks in the middle, returns to zero) between pi/2 and -pi/2

    Two particles of equal mass move with equal angular speed in opposite directions starting symmetric about the vertical axis. By symmetry, their velocity components along the axis of symmetry cancel, and the net momentum is purely along the perpendicular direction, whose magnitude varies smoothly — starting at zero at theta=pi/2 (particles momentarily have momenta that cancel as they start from the same point moving oppositely is not literal here, but by the symmetric setup the net momentum traces a smooth dome shape), peaking in the middle of the motion, and returning to zero as the particles meet at B. This matches the smooth dome-shaped curve (option 2).

  7. Q7· Atoms

    In Geiger-Marsden experiment, the number of scattered alpha-particles N(theta) is plotted as a function of scattering angle theta. Which of the following options represents the correct plot?

    • A. N(theta) stays roughly flat and high from 0 to 90 degrees, then declines sharply towards 180 degrees
    • B. N(theta) starts very high near 0 degrees and decreases steeply and monotonically as theta increases towards 180 degrees
    • C. N(theta) is low near 0 degrees, rises to a plateau/peak around 90 degrees, then falls back down near 180 degrees
    • D. N(theta) increases roughly linearly from a low value at 0 degrees to a higher value at 180 degrees
    Show answer

    Answer: B — N(theta) starts very high near 0 degrees and decreases steeply and monotonically as theta increases towards 180 degrees

    In the Geiger-Marsden (Rutherford gold foil) scattering experiment, the number of scattered alpha particles N(theta) is maximum at small angles (most particles pass through with little deflection) and decreases monotonically and steeply as the scattering angle increases, since large-angle scattering (close encounters with the nucleus) is increasingly rare. This gives a steeply decreasing curve starting high near theta=0.

  8. Q8· Ray Optics and Optical Instruments

    Consider three media P, Q and R with refractive indices 1, 1.25, and 1.5, respectively. The medium Q, having a thickness of 5 cm, is placed between extended media P and R as shown. An object O is placed at the center of medium Q. If viewed from medium P near the normal direction, the apparent depth of O is h1. For similar observation from medium R, the apparent depth is h2. The value of |h1 - h2|, in cm, is:

    • A. 1
    • B. 2
    • C. 3
    • D. 0
    Show answer

    Answer: A — 1

    O is at the center of the 5cm thick medium Q, so it is 2.5cm from each interface. Viewed from P: apparent depth h1 = real depth x (n_P/n_Q) = 2.5 x (1/1.25) = 2cm. Viewed from R: apparent depth h2 = real depth x (n_R/n_Q) = 2.5 x (1.5/1.25) = 3cm. |h1 - h2| = |2 - 3| = 1cm.

  9. Q9· Units and Measurements

    Consider that sigma_s, k_B, b represent Stefan-Boltzmann constant, Boltzmann constant and Wien's displacement law constant, respectively. The dimension of sigma_s * k_B^-1 * b is:

    • A. [L^-1 K^-2]
    • B. [L^-1 T^-1 K^-3]
    • C. [L^-1 T^-1 K^-4]
    • D. [L^-1 T^-1 K^-2]
    Show answer

    Answer: D — [L^-1 T^-1 K^-2]

    Stefan-Boltzmann constant sigma_s has dimension [M T^-3 K^-4]. Boltzmann constant k_B has dimension [M L^2 T^-2 K^-1]. Wien's constant b has dimension [L K]. So sigma_s/k_B = [M T^-3 K^-4]/[M L^2 T^-2 K^-1] = [L^-2 T^-1 K^-3]. Multiplying by b = [L K] gives [L^-1 T^-1 K^-2].

  10. Q10· Waves

    For sound waves, if the number of nodes for the 5th harmonic of an open-ended pipe is n and that for the 9th harmonic of the same pipe with one of its ends closed is m, the ratio n/m is:

    • A. 9/5
    • B. 1
    • C. 3/5
    • D. 5/9
    Show answer

    Answer: B — 1

    For an open pipe, the kth harmonic has k nodes, so the 5th harmonic has n=5 nodes. For a closed pipe (one end closed), only odd harmonics (1st, 3rd, 5th, 7th, 9th...) occur, and the kth odd harmonic (2k-1) has k nodes; for the 9th harmonic, 2k-1=9 so k=5, giving m=5 nodes. So n/m = 5/5 = 1.

  11. Q11· Moving Charges and Magnetism

    Two infinitely long parallel conducting wires A and B carry currents I and 2I, respectively, in the same direction. The wire A has uniform mass per unit length lambda and lies on an insulated floor. The wire B is kept fixed at a height h above the floor. The minimum magnitude of h so that the wire A does not rise from the floor is: [g is the acceleration due to gravity and mu_0 is the permeability of free space.]

    • A. mu_0*I^2/(pi*lambda*g)
    • B. 2*mu_0*I^2/(pi*lambda*g)
    • C. 4*mu_0*I^2/(pi*lambda*g)
    • D. mu_0*I^2/(2*pi*lambda*g)
    Show answer

    Answer: A — mu_0*I^2/(pi*lambda*g)

    Since both wires carry current in the same direction, they attract each other, so wire B (above) pulls wire A upward. Force per unit length = mu_0 * I * (2I) / (2*pi*h) = mu_0*I^2/(pi*h). For A to just not rise, this must equal the weight per unit length lambda*g: mu_0*I^2/(pi*h) = lambda*g, giving h = mu_0*I^2/(pi*lambda*g).

  12. Q12· Alternating Current

    An ac voltage V = 220 sin(2x10^3 t) Volt is applied to a series LCR circuit. Then the current amplitude in this circuit is: (Given: L = 10 mH, C = 25 microF, R = 100 Ohm)

    • A. 5.5 A
    • B. 11.0 A
    • C. 22.0 A
    • D. 2.2 A
    Show answer

    Answer: D — 2.2 A

    Angular frequency omega = 2x10^3 rad/s. XL = omega*L = 2000 x 0.01 = 20 Ohm. XC = 1/(omega*C) = 1/(2000 x 25x10^-6) = 20 Ohm. Since XL = XC, the circuit is at resonance, so impedance Z = R = 100 Ohm. Current amplitude = V0/Z = 220/100 = 2.2 A.

  13. Q13· Electrostatic Potential and Capacitance

    Consider a fixed uniformly charged insulating sphere with radius R and total charge +Q. A point charge -q (q << Q) with mass m is released from rest at a distance of 3R from the centre of the charged sphere. When the point charge reaches the surface of the sphere, its speed is: (epsilon_0 is the permittivity of vacuum; neglect gravitational forces).

    • A. sqrt(2Qq/(3*pi*epsilon_0*m*R))
    • B. sqrt(Qq/(3*pi*epsilon_0*m*R))
    • C. sqrt(Qq/(4*pi*epsilon_0*m*R))
    • D. sqrt(3Qq/(4*pi*epsilon_0*m*R))
    Show answer

    Answer: B — sqrt(Qq/(3*pi*epsilon_0*m*R))

    Outside the sphere, potential V(r) = kQ/r (k=1/4*pi*epsilon_0). Potential energy of -q at distance r is U(r) = -kQq/r. By energy conservation from 3R to R: (1/2)mv^2 = U(3R) - U(R) = -kQq/(3R) + kQq/R = kQq(2/3R) = 2kQq/(3R). Substituting k=1/(4*pi*epsilon_0): v^2 = Qq/(3*pi*epsilon_0*m*R), so v = sqrt(Qq/(3*pi*epsilon_0*m*R)).

  14. Q14· Dual Nature of Radiation and Matter

    A beam of light falls on a metal surface such that photo-electrons are generated. If power of the light source starts to decrease linearly with time t, then variation of the photocurrent I and magnitude of the stopping potential |V| with time is best represented by:

    • A. I decreases linearly with t, and |V| also decreases linearly with t
    • B. I stays constant (flat) with t, and |V| decreases linearly with t
    • C. I stays constant (flat) with t, and |V| also stays constant (flat) with t
    • D. I decreases linearly with t, and |V| stays constant (flat) with t
    Show answer

    Answer: D — I decreases linearly with t, and |V| stays constant (flat) with t

    Photocurrent is proportional to the intensity (power) of light, so as power decreases linearly with time, photocurrent I also decreases linearly. The stopping potential depends only on the frequency of light (not intensity), and since the frequency is unchanged, the stopping potential |V| remains constant over time.

  15. Q15· Gravitation

    Two planets P1 and P2 with equal mass have radii R1 and R2, respectively, where R2 = R1/2. The escape speeds of P1 and P2 are v1 and v2, respectively. Then v2/v1 is:

    • A. 1
    • B. sqrt(2)
    • C. 2
    • D. 1/sqrt(2)
    Show answer

    Answer: B — sqrt(2)

    Escape speed v = sqrt(2GM/R). Since both planets have equal mass M, v2/v1 = sqrt(R1/R2) = sqrt(R1/(R1/2)) = sqrt(2).

  16. Take NEET-style timed mocks with your rank

    Full 720-mark mocks, NEET 2026 PYQs and instant analysis. Free for 30 days, no card.

    Compare NEET course plans for every class.

    Start free
  17. Q16· Electrostatic Potential and Capacitance

    A unit positive point charge is taken slowly through an infinitesimally thin tube that is inside a charged dielectric sphere of radius R, having uniform positive charge density ρ. The initial and final positions of the charge are marked by A and B at distances 2R and 3R respectively, from the centre of the sphere. In this process, the magnitude of the total work done on the point charge is ρR²/(n∈₀). The value of n is: (∈₀ is the permittivity of vacuum)

    • A. 6
    • B. 9
    • C. 18
    • D. 2
    Show answer

    Answer: C — 18

    Both A (2R) and B (3R) lie outside the sphere (radius R), so the field there is the same as that of a point charge Q = (4/3)πR³ρ at the centre. Potential outside: V(r) = Q/(4π∈₀r) = ρR³/(3∈₀r). V(A) at r=2R: ρR²/(6∈₀). V(B) at r=3R: ρR²/(9∈₀). Work done on unit charge moving from A to B = q[V(B)-V(A)] = ρR²/(9∈₀) - ρR²/(6∈₀) = -ρR²/(18∈₀). Magnitude = ρR²/(18∈₀), so n = 18.

  18. Q17· Thermodynamics

    One mole of an ideal monatomic gas undergoes a cyclic process a→b→c→d→a as shown in the P-V diagram: a(V=2 m³, P=300 N/m²) → b(V=5 m³, P=300 N/m²) → c(V=5 m³, P=100 N/m²) → d(V=2 m³, P=100 N/m²) → a. The total heat supplied to the gas is:

    • A. 500 J
    • B. 600 J
    • C. 800 J
    • D. 400 J
    Show answer

    Answer: B — 600 J

    The cycle a→b→c→d→a traces a rectangle in the P-V plane in the clockwise sense, so the net work done by the gas over one complete cycle equals the enclosed area: W = ΔP × ΔV = (300-100) × (5-2) = 200 × 3 = 600 J. Since internal energy returns to its initial value after a full cycle (ΔU_cycle = 0), the net heat supplied to the gas over the cycle equals the net work done by the gas: Q_net = W = 600 J.

  19. Q18· Electromagnetic Waves

    The following table presents the part of the electromagnetic spectrum and their corresponding major applications: P: Microwave, Q: UV rays, R: Gamma rays, S: Radio wave I: For purifying the water, II: For warming the food, III: For AM and FM communication systems, IV: For treating the Cancer cells The correct option is:

    • A. P-I, Q-IV, R-II, S-III
    • B. P-II, Q-I, R-IV, S-III
    • C. P-II, Q-IV, R-III, S-I
    • D. P-I, Q-II, R-III, S-IV
    Show answer

    Answer: B — P-II, Q-I, R-IV, S-III

    Microwaves are used for warming food (P-II, as in microwave ovens). UV rays are used for purifying water (Q-I, UV water purification). Gamma rays are used for treating cancer cells (R-IV, radiotherapy). Radio waves are used for AM and FM communication systems (S-III). This matches P-II, Q-I, R-IV, S-III.

  20. Q19· Laws of Motion

    A car travels on a circular racetrack of radius 50 m, which is banked at an angle θ. If the car travels at a speed 10 ms⁻¹, then the wear and tear on its tyres is minimum. Taking the acceleration due to gravity to be 10 ms⁻², the value of θ is:

    • A. tan⁻¹(2/5)
    • B. tan⁻¹(√3/2)
    • C. tan⁻¹(2√3)
    • D. tan⁻¹(1/5)
    Show answer

    Answer: D — tan⁻¹(1/5)

    Wear and tear on tyres is minimum when no frictional force is needed, i.e., at the optimum (design) speed for the banked angle: tanθ = v²/(rg). Substituting v=10 m/s, r=50 m, g=10 m/s²: tanθ = (10)²/(50×10) = 100/500 = 1/5. So θ = tan⁻¹(1/5).

  21. Q20· Kinematics

    Consider a particle moving along a straight line, whose position as a function of time is given by s(t) = αt² − βt + γ, where α = 1 ms⁻², β = 6 ms⁻¹ and γ = 5 m. The average speed of the particle, in ms⁻¹, from t = 0 to t = 6 s is:

    • A. 6
    • B. 3
    • C. 0
    • D. 12
    Show answer

    Answer: B — 3

    s(t) = t² - 6t + 5. Velocity v(t) = 2t - 6, which is zero at t = 3 s, so the particle reverses direction at t=3s and we must use total distance, not displacement. s(0)=5, s(3)=9-18+5=-4, s(6)=36-36+5=5. Distance from t=0 to 3: |-4-5|=9 m. Distance from t=3 to 6: |5-(-4)|=9 m. Total distance = 18 m. Average speed = total distance/total time = 18/6 = 3 ms⁻¹.

  22. Q21· Electrostatic Potential and Capacitance

    A point charge Q is placed inside a cavity within a solid isolated conducting sphere. Consider points A, B and C, where the magnitude of the electric fields are E_A, E_B and E_C, respectively. Point A lies inside the cavity (off-centre, near Q). Points B and C lie outside the solid sphere, at the same distance from the centre of the solid sphere but in different directions. The correct option is:

    • A. E_A ≠ 0, E_B = E_C
    • B. E_A = 0, E_B > E_C
    • C. E_A ≠ 0, E_B < E_C
    • D. E_A = 0, E_B = E_C
    Show answer

    Answer: A — E_A ≠ 0, E_B = E_C

    Inside the cavity, point A is off-centre relative to charge Q, so the field there (due to Q alone, since the conductor's induced charges on the cavity wall produce no field inside the cavity other than cancelling any external influence) is nonzero: E_A ≠ 0. Outside a solid isolated conductor, the induced charge distributes itself on the outer surface such that the exterior field is exactly that of a point charge Q located at the centre, regardless of where Q sits inside the cavity (shielding effect). Since the exterior field is spherically symmetric and depends only on the radial distance from the centre, and B and C are at the same distance from the centre (just in different directions), their field magnitudes are equal: E_B = E_C.

  23. Q22· Mechanical Properties of Fluids

    In the measurement of viscosity of liquids using the terminal velocity experiment, spherical balls of the same radius but having different densities are used. The variation of the terminal velocity (v) with the ratio of density of the spherical ball (σ) to density of the liquid (ρ), is best represented by a graph that is:

    • A. a straight line through the origin with positive slope
    • B. a straight line with a positive y-intercept at σ/ρ=0
    • C. zero for σ/ρ < 1 with a sudden jump and a flat plateau beyond σ/ρ = 1
    • D. zero (flat along the axis) for σ/ρ ≤ 1 and then rising linearly for σ/ρ > 1
    Show answer

    Answer: D — zero (flat along the axis) for σ/ρ ≤ 1 and then rising linearly for σ/ρ > 1

    Terminal velocity is given by v = (2r²g/9η)(σ-ρ) = (2r²gρ/9η)(σ/ρ - 1). For σ/ρ ≤ 1, the ball does not sink (it floats or is neutrally buoyant), so there is no downward terminal (sinking) velocity to measure, giving v = 0 in that region. For σ/ρ > 1, v increases linearly with σ/ρ, with the line originating from the point (1, 0). This flat-then-linear-rising-from-(1,0) shape matches option (4).

  24. Q23· Dual Nature of Radiation and Matter

    A ray of light with wavelength λ is incident on three different photo-electric cells namely 1, 2 and 3. The threshold wavelengths of these photo-electric cells are λ₁, λ₂, and λ₃ respectively and the magnitude of stopping potentials of these cells are V₁, V₂ and V₃ respectively. The relation between λ and threshold wavelengths are λ₁ < λ, λ₂ > λ and λ₃ >> λ. The correct option is:

    • A. V₁ = 0, V₂ > V₃
    • B. V₁ > V₂, V₃ = 0
    • C. V₁ < V₂, V₃ = 0
    • D. V₁ = 0, V₂ < V₃
    Show answer

    Answer: D — V₁ = 0, V₂ < V₃

    Photoemission occurs only when the incident wavelength is less than the threshold wavelength (λ < λ_threshold), i.e., photon energy exceeds the work function. For cell 1: λ₁ < λ means the threshold wavelength is smaller than incident wavelength, so no photoemission occurs and V₁ = 0. For cell 2: λ₂ > λ, so photoemission occurs with some stopping potential V₂ > 0. For cell 3: λ₃ >> λ, so the incident photon energy far exceeds the work function, giving a much larger stopping potential V₃ >> V₂ > 0. Hence V₁ = 0 and V₂ < V₃.

  25. Q24· Moving Charges and Magnetism

    A current I₀ flows through a metallic circular loop of radius r. The current enters the loop at point A (top) and leaves at point C (bottom, diametrically opposite A), splitting into two semicircular paths: A-B-C (through B on the left) and A-D-C (through D on the right). The resistance of the segment ABC is half that of ADC. The magnitude of the magnetic field at the centre O of the loop is:

    • A. μ₀I₀/4r
    • B. μ₀I₀/2r
    • C. μ₀I₀/2πr
    • D. μ₀I₀/12r
    Show answer

    Answer: D — μ₀I₀/12r

    Since R_ABC = R_ADC/2, current divides inversely to resistance: I_ABC = 2I_ADC, and since I_ABC + I_ADC = I₀, I_ADC = I₀/3 and I_ABC = 2I₀/3. Both ABC and ADC are semicircular arcs (A and C are diametrically opposite), and a semicircular arc carrying current I produces field μ₀I/(4r) at the centre. The two currents circulate in opposite senses (one clockwise, one counter-clockwise as seen from the centre), so their fields oppose: B_net = μ₀(2I₀/3)/(4r) - μ₀(I₀/3)/(4r) = μ₀I₀/(6r) - μ₀I₀/(12r) = μ₀I₀/(12r).

  26. Q25· Work, Energy and Power

    A particle of mass M moves along a horizontal x axis from x = 0 to x = L. The coefficient of kinetic friction varies as a function of x as μ_k(x) = μ₀ − αx, where μ₀, α are constants of appropriate dimensions, so that μ_k(L) = 0. The total work done by the frictional force during the motion has magnitude nμ₀MgL, where g is the acceleration due to gravity. The value of n is:

    • A. 1
    • B. 1/3
    • C. 1/2
    • D. 3
    Show answer

    Answer: C — 1/2

    Since μ_k(L)=0, α = μ₀/L. The magnitude of work done against friction is W = Mg∫₀^L μ_k(x) dx = Mg∫₀^L (μ₀ - αx) dx = Mg[μ₀L - αL²/2] = Mg[μ₀L - (μ₀/L)(L²/2)] = Mg[μ₀L - μ₀L/2] = (1/2)μ₀MgL. So n = 1/2.

  27. Q26· Gravitation

    In the solar system, the time-period of revolution of a planet tracing a circular orbit of radius R is proportional to:

    • A. R^(3/2)
    • B. R²
    • C. R³
    • D. R^(1/2)
    Show answer

    Answer: A — R^(3/2)

    By Kepler's third law of planetary motion, T² ∝ R³, so T ∝ R^(3/2).

  28. Q27· System of Particles and Rotational Motion

    A solid sphere A of radius R and mass M is attached at a point to a smaller solid sphere B of radius r < R and mass m < M, with the line joining their centres lying along the horizontal. The moment of inertia of the system about a vertical axis passing through the centre of A is I_A and that about a vertical axis passing through the centre of B is I_B. The difference I_A − I_B is:

    • A. (m − M)(R + r)²
    • B. (m − M)(R − r)²
    • C. 0
    • D. (M − m)(R + r)²
    Show answer

    Answer: A — (m − M)(R + r)²

    I_A = (2/5)MR² [A about its own centre] + (2/5)mr² + m(R+r)² [B shifted by parallel axis theorem, since centre-to-centre distance is R+r]. I_B = (2/5)mr² [B about its own centre] + (2/5)MR² + M(R+r)² [A shifted by the same distance R+r]. The common terms (2/5)MR² and (2/5)mr² cancel in the difference, leaving I_A − I_B = m(R+r)² − M(R+r)² = (m−M)(R+r)².

  29. Q28· Ray Optics and Optical Instruments

    A lens combination consists of two lenses, L₁ and L₂, of focal lengths +10 cm and −10 cm respectively, separated by 3 cm. An object O is placed 30 cm to the left of L₁ on the common principal axis. The position of the final image formed is:

    • A. 60 cm to the left of the concave lens
    • B. 30 cm to the right of the concave lens
    • C. 60 cm to the right of the concave lens
    • D. 20 cm to the left of the concave lens
    Show answer

    Answer: A — 60 cm to the left of the concave lens

    For L₁ (f=+10cm, u=-30cm): 1/v = 1/f + 1/u = 1/10 - 1/30 = 1/15, so v = 15 cm (image forms 15 cm to the right of L₁, i.e., 15-3=12 cm beyond L₂). This serves as a virtual object for L₂ at u₂=+12 cm. For L₂ (f=-10cm): 1/v₂ = 1/f₂ + 1/u₂ = -1/10 + 1/12 = -1/60, so v₂ = -60 cm. The negative sign means the final image forms 60 cm to the left of the concave lens L₂.

  30. Q29· Semiconductor Electronics

    An ideal Zener diode with breakdown voltage of −3 V is reverse biased with a negative input voltage Vᵢ = −5 V, connected in series with a resistor R (points C-diode-B-R-A, with the battery completing the circuit from A back to C). The magnitude of voltage difference between points B and A is:

    • A. 2 V
    • B. 1 V
    • C. 0 V
    • D. 3 V
    Show answer

    Answer: A — 2 V

    Since the Zener diode is reverse biased and the applied voltage magnitude (5 V) exceeds the breakdown voltage (3 V), the diode breaks down and clamps the voltage across itself (between C and B) at 3 V in magnitude. The remaining voltage drops across the resistor R (between B and A): |Vᵢ| - |V_breakdown| = 5 - 3 = 2 V. So the magnitude of the voltage difference between B and A is 2 V.

  31. Q30· Electrostatic Potential and Capacitance

    Three identical capacitors, P, Q and S, each of capacitance C, are connected to a battery of voltage V. P and Q are connected in series with each other, and this series combination is connected in parallel with S, with the whole combination connected across the battery V. If the energy stored in capacitor P and the total energy stored in the system are U_P and U_T, respectively, then the ratio U_P/U_T is:

    • A. 1/3
    • B. 1/2
    • C. 1/6
    • D. 2/3
    Show answer

    Answer: C — 1/6

    The P-Q series combination and S are both connected directly across the battery, so each sees the full voltage V. Equivalent capacitance of P and Q in series is C/2, so charge on this branch is Q_series = (C/2)V, which is also the charge on each of P and Q individually (series components share charge). Energy in P: U_P = Q_series²/(2C) = (CV/2)²/(2C) = CV²/8. By symmetry U_Q = CV²/8 too. Energy in S: U_S = (1/2)CV² (full voltage V across capacitance C). Total: U_T = CV²/8 + CV²/8 + CV²/2 = 3CV²/4. Ratio U_P/U_T = (CV²/8)/(3CV²/4) = 1/6.

  32. Take NEET-style timed mocks with your rank

    Full 720-mark mocks, NEET 2026 PYQs and instant analysis. Free for 30 days, no card.

    Compare NEET course plans for every class.

    Start free
  33. Q31· Electromagnetic Induction

    A conducting loop of finite resistance lies on the x-y plane. There is a constant magnetic field in the z direction. The area of the loop varies with time t, as A = A₀(1 + sin t) in appropriate units. The figure that correctly indicates the qualitative behaviour of the power P dissipated in the loop as a function of time is: (1) P starts at a maximum value at t=0, dips down to touch zero, then rises back to a plateau, repeating this cusp-like pattern; (2) P jumps to a constant plateau value and stays flat; (3) P rises monotonically like an increasing exponential-type curve; (4) P is zero at t=0, rises to a hump, returns to zero, then repeats as a series of separate arches touching zero between each.

    • A. Option (1): a repeating pattern of cusps touching zero, starting from a maximum at t=0
    • B. Option (2): P rises once and stays constant (flat plateau)
    • C. Option (3): P increases monotonically with time
    • D. Option (4): P is zero at t=0 and forms separate zero-touching arches
    Show answer

    Answer: A — Option (1): a repeating pattern of cusps touching zero, starting from a maximum at t=0

    EMF = -B(dA/dt) = -B A₀ cos t. Power dissipated P = EMF²/R = (B A₀)²cos²t / R, which is proportional to cos²t. This function equals its maximum value at t=0, decreases to zero at t=π/2, rises back to maximum at t=π, and repeats periodically with period π -- producing a series of cusp-shaped humps that touch zero and immediately rise again, starting from a maximum at t=0. This matches the qualitative shape in option (1).

  34. Q32· Current Electricity

    Consider two circuits, (A) and (B), each having two resistors. In circuit (A), two resistors R₀(1−αΔT) and R₀(1+αΔT) are connected in series with a battery V, giving current I_A. In circuit (B), the same two resistors R₀(1−αΔT) and R₀(1+αΔT) are connected in parallel with a battery V, giving current I_B. As the temperature (ΔT) is increased, the correct option describing the variation of current in these circuits is:

    • A. I_A decreases while I_B increases
    • B. I_A increases while I_B decreases
    • C. both I_A and I_B remain constant
    • D. I_A remains constant while I_B increases
    Show answer

    Answer: D — I_A remains constant while I_B increases

    Circuit A (series): total resistance = R₀(1-αΔT) + R₀(1+αΔT) = 2R₀, independent of ΔT (the temperature-dependent terms cancel). So I_A = V/(2R₀) stays constant. Circuit B (parallel): R_parallel = [R₀(1-αΔT)·R₀(1+αΔT)]/(2R₀) = R₀(1-α²ΔT²)/2, which decreases as ΔT increases. Since I_B = V/R_parallel, a decreasing resistance means I_B increases with ΔT. So I_A remains constant while I_B increases.

  35. Q33· Work, Energy and Power

    Bob B of mass m at rest is hanging vertically from the ceiling via a massless string of length 10 m. Point mass A of mass m travelling horizontally with speed 10 ms⁻¹ hits bob B elastically. The bob B rises h metre after the collision. Taking g = 10 ms⁻² and neglecting the size of the bob, the value of h is:

    • A. 7
    • B. 5
    • C. 2.5
    • D. 8
    Show answer

    Answer: B — 5

    In an elastic collision between two equal masses where one is initially at rest, the velocities are completely exchanged: A comes to rest and B moves off with the full initial speed, 10 ms⁻¹. B then rises as a pendulum, converting kinetic energy to potential energy: (1/2)mv² = mgh, so h = v²/(2g) = 100/20 = 5 m.

  36. Q34· Oscillations

    A cylindrical cork of uniform density floats in a liquid of density ρ₁. If the cork is depressed slightly and released, it oscillates harmonically with time period T. If the same cork floats in another liquid of density ρ₂, then the similar oscillation has time period 2T. The value of ρ₂/ρ₁ is:

    • A. 2
    • B. 1/2
    • C. 1/4
    • D. 4
    Show answer

    Answer: C — 1/4

    For a floating cylindrical cork displaced by x, the restoring force is F = -ρ_liquid A g x, giving effective spring constant k = ρ_liquid A g. Time period T = 2π√(m/k) = 2π√(m/(ρ_liquid A g)), so T ∝ 1/√ρ_liquid (mass m of the cork is fixed). Given T₂ = 2T₁: T₂/T₁ = √(ρ₁/ρ₂) = 2, so ρ₁/ρ₂ = 4, giving ρ₂/ρ₁ = 1/4.

  37. Q35· Kinetic Theory

    The mean free path of molecules in an ideal gas A is half that of another ideal gas B. The diameter of the spherical molecules of gas A is twice the diameter of the molecules of B. If the number densities of gases A and B are n_A and n_B respectively, then the correct option is:

    • A. n_A = 2n_B
    • B. n_A = (1/4)n_B
    • C. n_A = (1/2)n_B
    • D. n_A = n_B
    Show answer

    Answer: C — n_A = (1/2)n_B

    Mean free path λ = 1/(√2πd²n). Given λ_A = λ_B/2 and d_A = 2d_B: λ_A/λ_B = (d_B²n_B)/(d_A²n_A) = 1/2. Substituting d_A² = 4d_B²: (d_B²n_B)/(4d_B²n_A) = 1/2, so n_B/(4n_A) = 1/2, giving n_B = 2n_A, i.e., n_A = (1/2)n_B.

  38. Q36· Nuclei

    Consider the following nuclear reaction: ²³⁸U → ²³⁴Th + ⁴He. Take masses of ²³⁸U, ²³⁴Th and ⁴He as 238.050 u, 234.043 u and 4.003 u, respectively. The Q value for the reaction, in keV, is: [Given: 1 u = 931.5 MeV c⁻²]

    • A. 3730
    • B. 3736
    • C. 3740
    • D. 3726
    Show answer

    Answer: D — 3726

    Mass defect Δm = 238.050 - (234.043 + 4.003) = 238.050 - 238.046 = 0.004 u. Q = Δm × 931.5 MeV = 0.004 × 931.5 = 3.726 MeV = 3726 keV.

  39. Q37· Electromagnetic Induction

    Consider a long solenoid of length l and radius r. If n is the number of turns per unit length and μ₀ is the permeability of free space, the inductance of the solenoid is:

    • A. μ₀n²r²l
    • B. (μ₀/2π)n²r²l
    • C. 2μ₀πn²r²l
    • D. μ₀πn²r²l
    Show answer

    Answer: D — μ₀πn²r²l

    The self-inductance of a long solenoid is L = μ₀n²Al, where A is the cross-sectional area = πr². So L = μ₀n²(πr²)l = μ₀πn²r²l.

  40. Q38· Units and Measurements

    Which of the following measurements require 'index correction'?

    • A. Measurement of gravitational acceleration using simple pendulum
    • B. Measurement of focal length of lenses using optical bench
    • C. Measurement of speed of sound using resonance tube
    • D. Measurement of resistance of a wire using meter bridge
    Show answer

    Answer: B — Measurement of focal length of lenses using optical bench

    Index correction (also called the index error or bench error correction) is applied in optical bench experiments for determining the focal length of lenses/mirrors, because the index needles (pointers) used to locate positions on the bench do not exactly coincide with the optical centre of the lens, introducing a systematic offset that must be corrected for.

  41. Q39· Thermal Properties of Matter

    The temperature of a metallic sphere of radius R is increased by a small amount ΔT. If the linear coefficient of thermal expansion of the metal is α, the approximate increase in the volume of the sphere is:

    • A. 3πR³αΔT
    • B. 4πR³αΔT
    • C. 6πR³αΔT
    • D. 2πR³αΔT
    Show answer

    Answer: B — 4πR³αΔT

    Volume V = (4/3)πR³. Differentiating: dV = 4πR² dR. Using linear expansion dR = RαΔT, we get dV = 4πR²(RαΔT) = 4πR³αΔT.

  42. Q40· Dual Nature of Radiation and Matter

    A photon and an electron, each of 20 eV energy, move in free space. The ratio of linear momentum of electron p_e to that of photon P_ph = p_e/P_ph is: (Take speed of light = 3×10⁸ ms⁻¹, charge of electron = −1.6×10⁻¹⁹ C and mass of electron = 9×10⁻³¹ kg)

    • A. 1/250
    • B. 225
    • C. 275
    • D. 2/450
    Show answer

    Answer: B — 225

    Energy E = 20 eV = 20 × 1.6×10⁻¹⁹ = 3.2×10⁻¹⁸ J. Photon momentum: P_ph = E/c = 3.2×10⁻¹⁸/(3×10⁸) = 1.0667×10⁻²⁶ kg m/s. Electron momentum: p_e = √(2mE) = √(2×9×10⁻³¹×3.2×10⁻¹⁸) = √(5.76×10⁻⁴⁸) = 2.4×10⁻²⁴ kg m/s. Ratio p_e/P_ph = 2.4×10⁻²⁴/1.0667×10⁻²⁶ ≈ 225.

  43. Q41· Atoms

    Consider that an electron is revolving in an excited state of a Hydrogen atom with velocity √25.6 × 10⁵ ms⁻¹. The radius of the orbit is x × 10⁻⁹ m. The value of x is: [Take the mass of electron to be 9×10⁻³¹ kg, charge of electron = −1.6×10⁻¹⁹ C and 1/(4πε₀) = 9×10⁹ N m² C⁻²]

    • A. 3
    • B. 2
    • C. 1
    • D. 4
    Show answer

    Answer: C — 1

    For a circular Bohr orbit, the Coulomb force provides centripetal force: ke²/r² = mv²/r, so r = ke²/(mv²). Here v² = 25.6×10¹⁰ = 2.56×10¹¹ (ms⁻¹)². ke² = 9×10⁹ × (1.6×10⁻¹⁹)² = 9×10⁹×2.56×10⁻³⁸ = 2.304×10⁻²⁸. mv² = 9×10⁻³¹×2.56×10¹¹ = 2.304×10⁻¹⁹. r = 2.304×10⁻²⁸/2.304×10⁻¹⁹ = 1×10⁻⁹ m. So x = 1.

  44. Q42· Electromagnetic Induction

    Two identical inductors, each of self-inductance L, are connected in two different configurations P and Q, where a time varying current I(t) flows. In configuration P, the two inductors are connected in series between nodes a and the bottom rail, with point b tapped between the two coils (so the emf is measured across just the first coil). In configuration Q, the two inductors are connected in parallel between nodes a and b, with I(t) splitting equally between them. The induced emf between points a and b for configuration P is E_P and for configuration Q is E_Q. The ratio E_P/E_Q is: [Neglect the effect of mutual inductance.]

    • A. 1/2
    • B. 1
    • C. 2
    • D. 1/4
    Show answer

    Answer: C — 2

    In configuration P, point b lies between the two series coils, so the emf measured from a to b is due to just one coil carrying the full current I(t): E_P = L(dI/dt). In configuration Q, the current I(t) splits equally between the two identical parallel coils, so each carries I(t)/2, and the emf across each (and hence between a and b) is E_Q = L(d(I/2)/dt) = (L/2)(dI/dt). Ratio E_P/E_Q = L(dI/dt) / [(L/2)(dI/dt)] = 2.

  45. Q43· Thermodynamics

    In an adiabatic expansion, the temperature of one mole of an ideal monatomic gas (γ=5/3) decreases from 60K to 50K. The work done by the gas in the process is: (Take the universal gas constant as R=8.3 J mol⁻¹ K⁻¹)

    • A. 83 J
    • B. 124.5 J
    • C. 166 J
    • D. 41.5 J
    Show answer

    Answer: B — 124.5 J

    For an adiabatic process, work done by the gas W = -ΔU = -nC_vΔT. For a monatomic gas, C_v = (3/2)R. ΔT = 50-60 = -10 K. W = -(1)(3/2)(8.3)(-10) = 124.5 J.

  46. Q44· Mechanical Properties of Fluids

    Water flows in a streamline motion through a horizontal pipe of circular cross-section. The pressure difference of water between P and Q is 15 Nm⁻². The area of cross-section at P and Q are 40 cm² and 20 cm², respectively. The rate of flow of water through the pipe, in cm³s⁻¹, is: [Take density of water = 1000 kg m⁻³]

    • A. 200
    • B. 300
    • C. 400
    • D. 100
    Show answer

    Answer: C — 400

    By continuity, v_P A_P = v_Q A_Q, so v_Q = 2v_P (since A_P=2A_Q). By Bernoulli's theorem: P_P - P_Q = (1/2)ρ(v_Q² - v_P²) = (1/2)ρ(4v_P² - v_P²) = (3/2)ρv_P². So 15 = (3/2)(1000)v_P², giving v_P² = 0.01, v_P = 0.1 m/s = 10 cm/s. Flow rate = A_P × v_P = 40 cm² × 10 cm/s = 400 cm³/s.

  47. Q45· System of Particles and Rotational Motion

    A thin horizontal disc is rotating about a vertical axis passing through its fixed centre O. Its angular momentum is L_A and L_B computed about points A and B, respectively, which lie along a line through O, with OB = 2 × OA. The value of L_A/L_B is:

    • A. 1/2
    • B. 1
    • C. 2
    • D. 1/4
    Show answer

    Answer: B — 1

    Since the disc spins about a fixed axis through its centre O (centre of mass at rest, not translating), the total linear momentum of the system is zero. The angular momentum about any point P is given by L_P = L_cm + r × P_total; since P_total = 0, the angular momentum is the same about every point in space, including A, B, and O. Hence L_A = L_B, and L_A/L_B = 1.

  48. Take NEET-style timed mocks with your rank

    Full 720-mark mocks, NEET 2026 PYQs and instant analysis. Free for 30 days, no card.

    Compare NEET course plans for every class.

    Start free
  49. Q46· Oscillations

    For a simple pendulum, having time period T, the variation of kinetic energy (K.E.) with time (t) is represented by which of the following graphs?

    • A. Graph (1): two asymmetric humps between 0 and T
    • B. Graph (2): flat line with a dip exactly at T/2
    • C. Graph (3): zero at t=0, max at T/4, zero at T/2, max at 3T/4, zero at T
    • D. Graph (4): nonzero at t=0, dips to zero before T/2, rises to a max before T, matching the standard |sin| shaped K.E.-vs-t curve for a pendulum released from rest at an extreme
    Show answer

    Answer: D — Graph (4): nonzero at t=0, dips to zero before T/2, rises to a max before T, matching the standard |sin| shaped K.E.-vs-t curve for a pendulum released from rest at an extreme

    KE of a pendulum bob is periodic with period T/2 and always non-negative, maximum at the mean position and zero at the extremes; matching graph is option D.

  50. Q47· Current Electricity

    A room heater is rated 1000 W, 220 V. If the supply voltage drops to 200 V, what will be the power consumed (approximately)?

    • A. 1000 W
    • B. 121 W
    • C. 826 W
    • D. 200 W
    Show answer

    Answer: C — 826 W

    R=V²/P=220²/1000=48.4Ω. At 200V, P=200²/48.4≈826 W.

  51. Q48· System of Particles and Rotational Motion

    The angular speed of a flywheel is increased from 600 rpm to 1200 rpm in 10 s. The number of revolutions completed by the flywheel during this time is:

    • A. 600
    • B. 300
    • C. 900
    • D. 150
    Show answer

    Answer: D — 150

    Average ω=(600+1200)/2=900 rpm = 15 rev/s; in 10s → 150 revolutions.

  52. Q49· Oscillations

    The sum of kinetic energy and potential energy of a simple pendulum bob is 0.02 joule. The speed of the simple pendulum bob at equilibrium position is approximately: (mass of bob = 20 g)

    • A. 2.0 m/s
    • B. 0.2 m/s
    • C. 1.41 m/s
    • D. 1.41 m/s
    Show answer

    Answer: D — 1.41 m/s

    At equilibrium, total energy = KE = ½mv². v=√(2E/m)=√(2×0.02/0.02)=√2≈1.41 m/s.

  53. Q50· Magnetism and Matter

    A 100-turn closely wound circular coil of radius 5 cm has a magnetic field of 3.14×10⁻³ T at its centre. The current flowing through the coil, and the magnitude of the magnetic moment of this coil, are respectively: (μ0=4π×10⁻⁷ T m/A)

    • A. 2.5 A, 20 A m²
    • B. 2 A, 4 A m²
    • C. 2.5 A, 2 A m²
    • D. 2 A, 10 A m²
    Show answer

    Answer: C — 2.5 A, 2 A m²

    B=μ0NI/2R gives I=2.5 A; m=NIA=100×2.5×π(0.05)²≈2 A m².

  54. Q51· Mechanical Properties of Fluids

    A submarine is designed to withstand an absolute pressure of 100 atm. How deep can it go below the water surface? (density of water=1000 kg/m³, 1 atm=1×10⁵ Pa, g=10 m/s²)

    • A. 9900 m
    • B. 990 m
    • C. 9000 m
    • D. 99 m
    Show answer

    Answer: B — 990 m

    P=P0+ρgh → (100-1)×10⁵=1000×10×h → h=990 m.

  55. Q52· Dual Nature of Radiation and Matter

    Match List I with List II: List I — A. E=hν, B. Diffraction and Interference, C. λ=h/p, D. Compton effect. List II — I. de Broglie wavelength, II. Particle nature of light, III. Wave nature of light, IV. Energy of photon.

    • A. A-IV, B-III, C-I, D-II
    • B. A-IV, B-III, C-I, D-II
    • C. A-I, B-IV, C-II, D-III
    • D. A-IV, B-I, C-II, D-III
    Show answer

    Answer: B — A-IV, B-III, C-I, D-II

    E=hν → energy of photon (IV); diffraction/interference → wave nature (III); λ=h/p → de Broglie wavelength (I); Compton effect → particle nature of light (II). A-IV, B-III, C-I, D-II.

  56. Q53· Mechanical Properties of Solids

    Match List I with List II: List I — A. Young's Modulus, B. Compressibility, C. Bulk Modulus, D. Poisson's Ratio. List II — I. (Δd/d)/(ΔL/L), II. FL/A(ΔL), III. -(1/ΔP)(ΔV/V), IV. -P(ΔV/V).

    • A. A-III, B-II, C-I, D-IV
    • B. A-II, B-III, C-IV, D-I
    • C. A-I, B-IV, C-III, D-II
    • D. A-IV, B-I, C-II, D-III
    Show answer

    Answer: B — A-II, B-III, C-IV, D-I

    Young's modulus=FL/A(ΔL) (II); compressibility=-(1/ΔP)(ΔV/V) (III); Bulk modulus=-P(ΔV/V) (IV); Poisson's ratio=(Δd/d)/(ΔL/L) (I). So A-II, B-III, C-IV, D-I.

  57. Q54· Electrostatic Potential and Capacitance

    Five capacitors of capacitances C1=C2=C3=C4=10 μF and C5=2.5 μF are connected as shown, along with a battery of 50 V. The equivalent capacitance and the charges on each capacitor respectively are:

    • A. 4 μF, 250 μC on C1 to C4 and 125 μC on C5
    • B. 5 μF, 250 μC on all capacitors
    • C. 5 μF, 125 μC on C1 to C4 and 25 μC on C5
    • D. 5 μF, 125 μC on all capacitors
    Show answer

    Answer: D — 5 μF, 125 μC on all capacitors

    By the symmetric bridge network, equivalent capacitance = 5 μF with 125 μC charge on all capacitors.

  58. Q55· Gravitation

    The amount of work done to raise a mass 'm' from the surface of the Earth to a height equal to the radius of the Earth 'R', will be:

    • A. mgR/2
    • B. 2mgR
    • C. mgR/4
    • D. 2mgR
    Show answer

    Answer: A — mgR/2

    W=GMm/R-GMm/2R=GMm/2R=mgR/2.

  59. Q56· Kinematics

    When a ruler falls vertically, 5 different persons catch it with different reaction times (g=9.8 m/s²): A:0.20s, B:0.22s, C:0.18s, D:0.19s, E:0.21s. What is the correct order of the distance travelled by the ruler for each person?

    • A. B>E>A>C>D
    • B. C>D>E>A>B
    • C. C>D>A>B>E
    • D. B>E>A>D>C
    Show answer

    Answer: D — B>E>A>D>C

    Distance ∝ t². Order of t: B(0.22)>E(0.21)>A(0.20)>D(0.19)>C(0.18); official key gives B>E>A>C>D.

  60. Q57· Work, Energy and Power

    The power of a crane, which lifts a mass of 1000 kg to a height of 20 m in 10 s is: (g=9.8 m/s²)

    • A. 19.6 kW
    • B. 19.6 W
    • C. 39.2 kW
    • D. 39.2 W
    Show answer

    Answer: A — 19.6 kW

    P=mgh/t=1000×9.8×20/10=19600 W=19.6 kW.

  61. Q58· Electrostatic Potential and Capacitance

    Consider two uncharged capacitors of equal capacitance 200 pF. One of them is charged by a 100 V supply and disconnected. Now this capacitor is connected to the uncharged capacitor. The amount of electrostatic energy lost in the process is:

    • A. 0.5 J
    • B. 1.0×10⁻⁶ J
    • C. 0.5×10⁻⁶ J
    • D. 1.0 J
    Show answer

    Answer: C — 0.5×10⁻⁶ J

    Initial energy=½CV²=1×10⁻⁶ J; after sharing, energy=0.5×10⁻⁶ J, so energy lost=0.5×10⁻⁶ J.

  62. Q59· Alternating Current

    An ac circuit contains a resistance of 1 kΩ, a capacitor of 0.1 μF and an inductor of 1 mH connected in series. The resonance frequency of the circuit is approximately:

    • A. 15.9 kHz
    • B. 20.7 kHz
    • C. 10.1 kHz
    • D. 13.5 kHz
    Show answer

    Answer: A — 15.9 kHz

    f=1/(2π√LC)=1/(2π√(1×10⁻³×0.1×10⁻⁶))≈15.9 kHz.

  63. Q60· Magnetism and Matter

    A long straight solid wire of circular cross-section of radius 'a' carries steady current I, uniformly distributed across its cross-section. The plot which correctly represents the variation of magnetic field (B) with distance (r) from the axis of the conductor is:

    • A. B increases linearly for r<a then stays constant for r>a
    • B. B increases linearly for r<a, peaks at r=a, then decreases as 1/r for r>a
    • C. B is constant inside and decreases as 1/r² outside
    • D. B decreases linearly inside and increases outside
    Show answer

    Answer: C — B is constant inside and decreases as 1/r² outside

    Inside: B∝r; outside: B∝1/r; peak at r=a — matches option 3.

  64. Take NEET-style timed mocks with your rank

    Full 720-mark mocks, NEET 2026 PYQs and instant analysis. Free for 30 days, no card.

    Compare NEET course plans for every class.

    Start free
  65. Q61· Thermodynamics

    An electric heater supplies heat to a system at a rate of 100 W. If the system performs work at a rate of 75 J/s, then the rate at which internal energy increases will be:

    • A. 75 W
    • B. 25 W
    • C. 100 W
    • D. 125 W
    Show answer

    Answer: B — 25 W

    dU/dt=dQ/dt-dW/dt=100-75=25 W.

  66. Q62· Alternating Current

    The peak value of an alternating current is 5 A and frequency is 60 Hz. How long will the current, starting from zero, take to reach the peak value?

    • A. 1/120 s
    • B. 1/240 s
    • C. 1/30 s
    • D. 1/60 s
    Show answer

    Answer: B — 1/240 s

    Time to reach peak from zero = T/4 = 1/(4×60) = 1/240 s.

  67. Q63· Wave Optics

    In Young's double-slit experiment, using monochromatic light of wavelength λ, the intensity of light at a point on the screen where the path difference is λ, is K units. The intensity of light at a point where the path difference is λ/3 will be:

    • A. K
    • B. 2K
    • C. K/2
    • D. K/4
    Show answer

    Answer: D — K/4

    I=Imax cos²(Δφ/2). At path diff λ (Δφ=2π), I=K=Imax. At λ/3 (Δφ=2π/3), I=Imax cos²(π/3)=Imax/4=K/4.

  68. Q64· Nuclei

    Four statements are given (A is mass number): A. Volume of a nucleus is proportional to A^(1/3). B. Volume of a nucleus is proportional to A. C. Difference in mass of an atom and its nucleus is called the mass defect. D. Difference in mass of a nucleus and its constituents is called the mass defect. Choose the correct answer:

    • A. A and D are true, but B and C are false
    • B. B and D are true, but A and C are false
    • C. B and C are true, but A and D are false
    • D. A and C are true, but B and D are false
    Show answer

    Answer: B — B and D are true, but A and C are false

    Nuclear volume ∝ A (B true, A false); mass defect = difference between mass of nucleus and sum of constituent masses (D true, C false). So B and D are true.

  69. Q65· Wave Optics

    In interference and diffraction, the light energy is redistributed. A. As there is no gain or loss of energy, these phenomena are consistent with the principle of conservation of energy. B. Diffraction and interference are characteristics exhibited only by light waves.

    • A. A is false, but B is true
    • B. A is true, but B is false
    • C. A is true and B is also true
    • D. Both A and B are false
    Show answer

    Answer: B — A is true, but B is false

    A is true (energy conserved, redistributed). B is false — diffraction/interference occur in all waves, not just light.

  70. Q66· Current Electricity

    A resistor is connected to a battery of 12 V emf and internal resistance 2 Ω. If the current in the circuit is 0.6 A, the terminal voltage of the battery is:

    • A. 12 V
    • B. 1.2 V
    • C. 10 V
    • D. 10.8 V
    Show answer

    Answer: D — 10.8 V

    Terminal voltage = EMF - I×r = 12 - 0.6×2 = 10.8 V.

  71. Q67· Current Electricity

    In a metre bridge experiment, the positions of the cell E and galvanometer G are interchanged. We shall observe in the galvanometer:

    • A. Only the right-sided deflection
    • B. Only the left-sided deflection
    • C. There will be no deflection irrespective of the position of the jockey
    • D. Both right-sided and left-sided deflection, and at balance point, no deflection
    Show answer

    Answer: D — Both right-sided and left-sided deflection, and at balance point, no deflection

    By reciprocity of a Wheatstone bridge, interchanging cell and galvanometer leaves the balance condition unchanged; deflection on either side is possible away from balance, and none at balance.

  72. Q68· Oscillations

    Savitha, an XI standard student, while conducting an experiment to determine the effective length of a simple pendulum, notes down the time taken to complete 30 oscillations as 60 s and hence calculates the length of the simple pendulum as: (π²=9.8, g=9.8 m/s²)

    • A. 0.75 m
    • B. 1 m
    • C. 1.5 m
    • D. 2 m
    Show answer

    Answer: B — 1 m

    T=60/30=2s. L=gT²/4π²=9.8×4/(4×9.8)=1 m.

  73. Q69· Electric Charges and Fields

    Which of the following statements are correct? A. Inside a conductor, the electrostatic field is zero. B. Electric field at the surface of a charged conductor does not depend on its surface charge density. C. The interior of a charged conductor can have no excess charge in the static situation. D. At the surface of a charged conductor, the electrostatic field must be normal to the surface at every point. E. The electrostatic potential is zero everywhere inside a charged conductor.

    • A. A, C and D only
    • B. A, C and E only
    • C. C, D and E only
    • D. A, B and D only
    Show answer

    Answer: A — A, C and D only

    A, C, D are correct properties of conductors in electrostatic equilibrium. B is false (E=σ/ε0 depends on charge density). E is false (potential is constant, not necessarily zero).

  74. Q70· Semiconductor Electronics

    Two statements are given below: A. When the forward bias voltage across a p-n junction diode increases above a certain threshold voltage, the diode current increases significantly. B. This current is called reverse saturation current.

    • A. Both Statements A and B are true
    • B. Both Statements A and B are false
    • C. Statement A is true, but Statement B is false
    • D. Statement A is false, but Statement B is true
    Show answer

    Answer: C — Statement A is true, but Statement B is false

    A is true; the current described is forward current, not reverse saturation current, so B is false.

  75. Q71· Ray Optics and Optical Instruments

    In a concave lens, a ray of light emanating from the object parallel to the principal axis of the lens, after refraction:

    • A. passes through the second principal focus
    • B. appears to diverge from the first principal focus
    • C. passes through 2F, which is the radius of curvature of the lens
    • D. emerges parallel to the principal axis
    Show answer

    Answer: B — appears to diverge from the first principal focus

    A ray parallel to the principal axis, after refraction through a diverging (concave) lens, appears to diverge from the first (virtual) focus.

  76. Q72· Nuclei

    An unknown nucleus has a nuclear density of 2.29×10¹⁷ kg/m³ and mass of 19.926×10⁻²⁷ kg. Its mass number A is approximately: (R0=1.2×10⁻¹⁵ m, 4π=12.56)

    • A. 16
    • B. 20
    • C. 12
    • D. 19
    Show answer

    Answer: C — 12

    Using density=mass/[(4/3)πR³] with R=R0A^(1/3), solving gives A≈12.

  77. Q73· Current Electricity

    A galvanometer of resistance 100 Ω gives full scale deflection for a current of 1 mA. It is converted into an ammeter of range 0–10 A. The shunt required is:

    • A. 0.001 Ω
    • B. 0.10 Ω
    • C. 1.0 Ω
    • D. 0.01 Ω
    Show answer

    Answer: D — 0.01 Ω

    S=IgG/(I-Ig)=(10⁻³×100)/(10-10⁻³)≈0.01 Ω.

  78. Q74· System of Particles and Rotational Motion

    A thin wire of length 'L' and linear mass density 'm' is bent into a circular ring (in the x-y plane) with centre 'C'. The moment of inertia of the ring about an axis yy' will be:

    • A. 3mL³/8π
    • B. 3mL²/8π²
    • C. 3mL³/8π²
    • D. 3mL²/8π
    Show answer

    Answer: C — 3mL³/8π²

    Radius r=L/2π, total mass M=mL. I about diameter = ½MR² = 3mL³/8π² (per official key).

  79. Q75· Oscillations

    For a travelling harmonic wave, y(x,t)=2.0 cos 2π(10t - 0.0080x + 0.35), where x and y are in cm and t in s. What is the phase difference between oscillatory motion of two points separated by a distance of 0.5 m?

    • A. 0.08π rad
    • B. 0.008π rad
    • C. 0.8π rad
    • D. 8π rad
    Show answer

    Answer: C — 0.8π rad

    Phase difference = k×Δx = 2π×0.0080(per cm)×50 cm = 0.8π rad.

  80. Take NEET-style timed mocks with your rank

    Full 720-mark mocks, NEET 2026 PYQs and instant analysis. Free for 30 days, no card.

    Compare NEET course plans for every class.

    Start free
  81. Q76· Laws of Motion

    A box of mass 15 kg is kept on the floor of a stationary trolley. The coefficient of static friction between the box and the trolley is 0.12. Keeping the box stationary over the trolley, the maximum acceleration with which the trolley can be moved horizontally, in m s⁻², is: (g=10 m/s²)

    • A. 1.8
    • B. 1.2
    • C. 1.5
    • D. 2.1
    Show answer

    Answer: B — 1.2

    Maximum acceleration = μg = 0.12×10 = 1.2 m/s².

  82. Q77· Semiconductor Electronics

    In the circuit shown below, the voltage appearing across the diode D will be of the form:

    • A. Waveform per option (1)
    • B. Waveform per option (2)
    • C. Waveform per option (3)
    • D. Waveform per option (4)
    Show answer

    Answer: D — Waveform per option (4)

    Per the given circuit and the official key, the voltage across diode D matches the pattern shown in option 4.

  83. Q78· Kinetic Theory

    A flask contains argon and chlorine in the ratio of 2:1 by mass. The temperature of the mixture is 27°C. The ratio of root mean square speed of the molecules of the two gases (vAr(rms)/vCl(rms)) is: (atomic mass of argon=40.0u, molecular mass of chlorine=70.0u)

    • A. 7/4
    • B. 2/√7
    • C. √(7/2)
    • D. 7/√2
    Show answer

    Answer: C — √(7/2)

    vrms∝1/√M, ratio=√(MCl/MAr)=√(70/40)=√(7/4)=√7/2.

  84. Q79· Electromagnetic Waves

    Match List I with List II: List I — A. Microwave, B. Visible light, C. Gamma rays, D. Infra-red rays. List II — I. Electrons in atoms emit light when they move from a higher to a lower energy level, II. Radioactive decay of nucleus, III. Vibration of atoms and molecules, IV. Klystron valve or magnetron valve.

    • A. A-IV, B-III, C-II, D-I
    • B. A-III, B-IV, C-I, D-II
    • C. A-IV, B-I, C-II, D-III
    • D. A-IV, B-I, C-II, D-III
    Show answer

    Answer: D — A-IV, B-I, C-II, D-III

    Microwave produced by klystron/magnetron (IV); visible light from electron transitions (I); gamma rays from radioactive decay (II); infra-red from vibration of atoms/molecules (III). A-IV, B-I, C-II, D-III.

  85. Q80· Laws of Motion

    The magnitude and direction of the acceleration produced in a body of mass 5 kg when two mutually perpendicular forces 8 N and 6 N act on it, are respectively:

    • A. 2 m/s²; tan⁻¹(3/4) with 8 N force
    • B. 2 m/s²; tan⁻¹(4/3) with 8 N force
    • C. 2 m/s²; tan⁻¹(3/4) with 6 N force
    • D. 20 m/s²; tan⁻¹(4/3) with 8 N force
    Show answer

    Answer: A — 2 m/s²; tan⁻¹(3/4) with 8 N force

    Resultant force=√(8²+6²)=10N, a=F/m=10/5=2 m/s², angle=tan⁻¹(6/8)=tan⁻¹(3/4) with the 8N force.

  86. Q81· Current Electricity

    The current I in the circuit shown below is: (All diodes are ideal and identical; resistors 4Ω, 3Ω, 5Ω; battery 10V)

    • A. 1/3 A
    • B. 15/2 A
    • C. 5/3 A
    • D. 5/9 A
    Show answer

    Answer: B — 15/2 A

    With ideal diodes conducting appropriately, the equivalent circuit reduces to give I=15/2 A as per the official key.

  87. Q82· Dual Nature of Radiation and Matter

    For a metal of work function 6.6 eV, which of the following wavelengths of incident radiation does not give rise to the photoelectric effect? (Planck's constant=6.6×10⁻³⁴ J s)

    • A. 200 nm
    • B. 100 nm
    • C. 50 nm
    • D. 150 nm
    Show answer

    Answer: A — 200 nm

    Threshold wavelength λ0=hc/W0≈188 nm. Wavelengths longer than this (200 nm) will not cause photoemission.

  88. Q83· Units and Measurements

    The speed of light in vacuum is taken as unity. If light takes 6 min 40 s to reach the Earth from the Sun, the distance between the Sun and the Earth in this new unit is:

    • A. 3×10⁸
    • B. 500
    • C. 3×10¹⁰
    • D. 400
    Show answer

    Answer: D — 400

    Time=6×60+40=400 s. Distance=speed×time=1×400=400 (in the new unit where c=1).

  89. Q84· Electromagnetic Induction

    A rectangular wire loop of sides 8 cm and 3 cm, with a small cut, is moving out of a region of uniform magnetic field of magnitude 0.3 T directed normal to the plane of the loop. If the velocity of the loop is 2 cm s⁻¹, the emf developed across the cut, in a direction normal to the shorter side, will be:

    • A. 1.8×10⁻⁴ volt
    • B. 1.3×10⁻⁴ volt
    • C. 1.2×10⁻⁴ volt
    • D. 4.8×10⁻⁴ volt
    Show answer

    Answer: A — 1.8×10⁻⁴ volt

    emf=B×L×v, with L=3 cm (shorter side) and v=2 cm/s: emf=0.3×3×10⁻²×2×10⁻²=1.8×10⁻⁴ V.

  90. Q85· Kinematics

    The following plots show variation of velocity (v) with time (t), of a ball thrown vertically upward, and falling back. Which of the following plots is/are correct? (five sub-graphs A-E shown)

    • A. B only
    • B. A and E only
    • C. C only
    • D. D only
    Show answer

    Answer: C — C only

    For a ball thrown up and falling back (ignoring air resistance), v decreases linearly from launch to zero at the top then becomes increasingly negative at a constant slope (-g) throughout — matching sub-graph C.

  91. Q86· Units and Measurements

    In a vernier calliper, 20 VSD coincide with 16 MSD (each division of length 1 mm). The least count of the vernier calliper is:

    • A. 0.2 cm
    • B. 0.1 cm
    • C. 0.02 cm
    • D. 0.01 cm
    Show answer

    Answer: C — 0.02 cm

    1 VSD=16/20 MSD=0.8mm. Least count=1MSD-1VSD=1-0.8=0.2mm=0.02 cm.

  92. Q87· Units and Measurements

    Each side of a metallic cube of mass 5.580 kg is measured to be 9.0 cm. Keeping the significant figures in view, the density of the material of the cube can be best expressed as X×10³ kg m⁻³, where the value of X is:

    • A. 7.654
    • B. 7.7
    • C. 7.65
    • D. 7.6
    Show answer

    Answer: D — 7.6

    Density=mass/volume=5.580/(9.0)³ cm³ → sides have 2 sig figs, so result rounds to 2 sig figs: X≈7.6.

  93. Q88· Wave Optics

    A ray of monochromatic light is passing through an equilateral prism (ABC) as shown in the figure. The refracted ray (QR) is parallel to its base (BC) and the angle of incidence (i) is 50°. Then the angle of deviation (δ) is:

    • A. 45°
    • B. 55°
    • C. 35°
    • D. 40°
    Show answer

    Answer: D — 40°

    For a ray refracted parallel to the base in an equilateral prism, deviation δ=2i-A=2(50)-60=40°.

  94. Q89· Atoms

    In the first excited state of hydrogen atom, the energy of its electron is -3.4 eV. The radial distance of the electron from the hydrogen nucleus in this case is approximately: (1eV=1.6×10⁻¹⁹J, e=1.6×10⁻¹⁹C, 1/4πε0=9×10⁹ Nm²/C²)

    • A. 2.1×10⁻⁸ m
    • B. 2.1×10⁻¹⁰ m
    • C. 2.1×10⁻¹¹ m
    • D. 2.1×10⁻⁹ m
    Show answer

    Answer: B — 2.1×10⁻¹⁰ m

    For n=2, r=n²×0.529Å=4×0.529≈2.1×10⁻¹⁰ m.

  95. Q90· Current Electricity

    A uniform metallic wire having resistance 4 Ω is bent to form a square loop ABCD. Resistance of 2 Ω is connected between points B and D, and a battery of 2 V is connected across points A and C, as shown in figure. The value of current (I) is:

    • A. 4 A
    • B. 4.5 A
    • C. 8 A
    • D. 2 A
    Show answer

    Answer: D — 2 A

    By symmetry and parallel combination of the two arms of the square with the BD resistor, the net resistance gives I=2 A per the official key.

Take NEET-style timed mocks with your rank

Full 720-mark mocks, NEET 2026 PYQs and instant analysis. Free for 30 days, no card.

Compare NEET course plans for every class.

Start free

More free practice: chapter-wise PYQs · NEET Question of the Day · Readiness Test