NEET 2016 Chemistry Question Paper with Answers
Updated 18 Nov 2026
45 NEET 2016 Chemistry questions with the correct answer and an explanation for each, chapter-wise. Tap “Show answer” under each question. No login needed.
- Q1· Amines
A given nitrogen-containing aromatic compound A reacts with Sn/HCl, followed by HNO2 to give an unstable compound B. B, on treatment with phenol, forms a beautiful coloured compound C with the molecular formula C12H10N2O. The structure of compound A is
- A. Benzamide (C6H5-CONH2)
- B. Aniline (C6H5-NH2)
- C. Nitrobenzene (C6H5-NO2)
- D. Benzonitrile (C6H5-CN)
Show answer
Answer: C — Nitrobenzene (C6H5-NO2)
Nitrobenzene → (Sn/HCl) → Aniline → (HNO2) → Benzenediazonium chloride (B, unstable) → (+phenol) → p-Hydroxyazobenzene (C, orange azodye, C12H10N2O)
- Q2· Haloalkanes and Haloarenes
Consider the reaction: CH3CH2CH2Br + NaCN → CH3CH2CH2CN + NaBr. This reaction will be the fastest in:
- A. water
- B. ethanol
- C. methanol
- D. N,N'-dimethylformamide (DMF)
Show answer
Answer: D — N,N'-dimethylformamide (DMF)
This is an SN2 reaction, which proceeds fastest in a polar aprotic solvent like DMF, since it does not solvate the nucleophile (CN-) as strongly as protic solvents do.
- Q3· Aldehydes, Ketones and Carboxylic Acids
The correct structure of the product A formed in the reaction: 2-cyclohexenone + H2(gas, 1 atmosphere)/Pd-carbon, ethanol → A is:
- A. Cyclohexanol with a carbocation (protonated, unstable)
- B. 2-cyclohexenol (OH with retained C=C double bond)
- C. Cyclohexanone (C=O unchanged, no reduction)
- D. Cyclohexanol (fully saturated OH, C=C reduced but C=O retained... )
Show answer
Answer: C — Cyclohexanone (C=O unchanged, no reduction)
Under mild conditions (1 atm H2, Pd/C), the C=C double bond conjugated with C=O is reduced preferentially while the C=O (carbonyl) multiple bond is not affected by Pd/C under these mild conditions, giving cyclohexanone as the product.
- Q4· Aldehydes, Ketones and Carboxylic Acids
Which among the given molecules (three bicyclic bridged ketones labeled I, II, III, with II having two phenyl substituents at the alpha carbon) can exhibit tautomerism?
- A. Both II and III
- B. III only
- C. Both I and III
- D. Both I and II
Show answer
Answer: B — III only
Bridge carbon atom does not participate in tautomerism. Acidic alpha-hydrogen must be present for tautomerism; in II both alpha-hydrogens are replaced by phenyl groups (no acidic H), so only III (which retains an alpha-H not at the bridgehead) can tautomerize.
- Q5· Aldehydes, Ketones and Carboxylic Acids
The correct order of strengths of the carboxylic acids (I: cyclohexanecarboxylic acid, II: tetrahydropyran-4-carboxylic acid with O at position adjacent, III: tetrahydropyran-4-carboxylic acid with O at a different position) is:
- A. II > I > III
- B. I > II > III
- C. II > III > I
- D. III > II > I
Show answer
Answer: C — II > III > I
The oxygen atom's -I effect increases acid strength; its proximity to the COOH group determines the extent: II (O closest) > III (O farther) > I (no O, cyclohexane only)
- Q6· Hydrocarbons
The compound that will react most readily with gaseous bromine has the formula:
- A. C2H4
- B. C3H6
- C. C2H2
- D. C4H10
Show answer
Answer: B — C3H6
C3H6 (propene, CnH2n, an alkene) is more reactive toward electrophilic addition with Br2 due to greater nucleophilic strength of the more substituted double bond compared to ethylene.
- Q7· Chemical Bonding and Molecular Structure
Which one of the following compounds shows the presence of intramolecular hydrogen bond?
- A. Concentrated acetic acid
- B. H2O2
- C. HCN
- D. Cellulose
Show answer
Answer: D — Cellulose
Cellulose exhibits intramolecular hydrogen bonding between OH groups on adjacent glucose units within the same chain, unlike the other options which show intermolecular H-bonding or none.
- Q8· Electrochemistry
The molar conductivity of a 0.5 mol/dm3 solution of AgNO3 with electrolytic conductivity of 5.76×10^-3 S cm^-1 at 298 K is:
- A. 28.8 S cm^2/mol
- B. 2.88 S cm^2/mol
- C. 11.52 S cm^2/mol
- D. 0.086 S cm^2/mol
Show answer
Answer: C — 11.52 S cm^2/mol
λm=K×1000/M=5.76×10^-3×1000/0.5=11.52 S cm^2/mol
- Q9· Chemical Kinetics
The decomposition of phosphine (PH3) on tungsten at low pressure is a first order reaction. It is because the:
- A. rate of decomposition is very slow
- B. rate is proportional to the surface coverage
- C. rate is inversely proportional to the surface coverage
- D. rate is independent of the surface coverage
Show answer
Answer: B — rate is proportional to the surface coverage
At low pressure, the rate is proportional to the surface coverage of adsorbed PH3, making the reaction first order with respect to pressure/concentration.
- Q10· Surface Chemistry
The coagulation values in millimoles per litre of the electrolytes used for the coagulation of As2S3 are given below: I. (NaCl) = 52, II. (BaCl2) = 0.69, III. (MgSO4) = 0.22. The correct order of their coagulating power is:
- A. III > I > II
- B. I > II > III
- C. II > I > III
- D. III > II > I
Show answer
Answer: D — III > II > I
As2S3 is a negative sol. Coagulating power ∝ charge on cation, and ∝ 1/(coagulation value). Lower coagulation value means higher coagulating power: III(0.22) > II(0.69) > I(52)
- Q11· Electrochemistry
During the electrolysis of molten sodium chloride, the time required to produce 0.10 mole of chlorine gas using a current of 3 amperes is:
- A. 330 minutes
- B. 55 minutes
- C. 110 minutes
- D. 220 minutes
Show answer
Answer: C — 110 minutes
moles×V.F.=it/96500. 0.1×2=3×t/96500. t=0.1×2×96500/(3×60)=107.22≈110 min
- Q12· Structure of Atom
How many electrons can fit in the orbital for which n = 3 and l = 1?
- A. 14
- B. 2
- C. 6
- D. 10
Show answer
Answer: B — 2
n=3, l=1 specifies a single 3p orbital (one of three p orbitals), which can hold a maximum of 2 electrons
- Q13· Thermodynamics
For a sample of perfect gas when its pressure is changed isothermally from pi to pf, the entropy change is given by:
- A. ΔS = RT ln(pi/pf)
- B. ΔS = nR ln(pf/pi)
- C. ΔS = nR ln(pi/pf)
- D. ΔS = nRT ln(pf/pi)
Show answer
Answer: C — ΔS = nR ln(pi/pf)
ΔS=q/T=(ΔE+w)/T=w/T=nRTln(pi/pf)/T=nR ln(pi/pf)
- Q14· Solutions
The van't Hoff factor (i) for a dilute aqueous solution of the strong electrolyte barium hydroxide is:
- A. 3
- B. 0
- C. 1
- D. 2
Show answer
Answer: A — 3
Ba(OH)2 → Ba2+ + 2OH-, dissociates into 3 ions, so i=3
- Q15· Equilibrium
The percentage of pyridine (C5H5N) that forms pyridinium ion (C5H5N+H) in a 0.10 M aqueous pyridine solution (Kb for C5H5N = 1.7×10^-9) is:
- A. 1.6%
- B. 0.0060%
- C. 0.013%
- D. 0.77%
Show answer
Answer: C — 0.013%
%=α=√(Keq/C)=√(1.7×10^-9/0.1)=1.3×10^-4=0.013%
- Q16· The Solid State
In calcium fluoride, having the fluorite structure, the coordination numbers for calcium ion (Ca2+) and fluoride ion (F-) are:
- A. 4 and 8
- B. 4 and 2
- C. 6 and 6
- D. 8 and 4
Show answer
Answer: D — 8 and 4
In CaF2 fluorite structure, Ca2+ has coordination number 8 and F- has coordination number 4, giving ratio 8:4
- Q17· Electrochemistry
If the E°cell for a given reaction has a negative value, which of the following gives the correct relationships for the values of ΔG° and Keq?
- A. ΔG° < 0 ; Keq < 1
- B. ΔG° > 0 ; Keq < 1
- C. ΔG° > 0 ; Keq > 1
- D. ΔG° < 0 ; Keq > 1
Show answer
Answer: B — ΔG° > 0 ; Keq < 1
E°cell=(-), so ΔG°cell=-nFE°cell=(+), i.e. ΔG°>0. Also E°cell=(0.06/n)logK, with negative E°cell giving logK<0, so K<1
- Q18· Solutions
Which one of the following is incorrect for ideal solution?
- A. ΔGmix = 0
- B. ΔHmix = 0
- C. ΔUmix = 0
- D. ΔP = Pobs - Pcalculated by Raoult's law = 0
Show answer
Answer: A — ΔGmix = 0
For ideal solutions, ΔGmix is always negative (not zero) since mixing is spontaneous; ΔHmix, ΔUmix, and ΔP are all zero for ideal solutions.
- Q19· Equilibrium
The solubility of AgCl(s) with solubility product 1.6×10^-10 in 0.1 M NaCl solution would be:
- A. Zero
- B. 1.26 × 10^-5 M
- C. 1.6 × 10^-9 M
- D. 1.6 × 10^-11 M
Show answer
Answer: C — 1.6 × 10^-9 M
S=Ksp/C=1.6×10^-10/0.1=1.6×10^-9 M
- Q20· Some Basic Concepts of Chemistry
Suppose the elements X and Y combine to form two compounds XY2 and X3Y2. When 0.1 mole of XY2 weighs 10 g and 0.05 mole of X3Y2 weighs 9 g, the atomic weights of X and Y are:
- A. 30, 20
- B. 40, 30
- C. 60, 40
- D. 20, 30
Show answer
Answer: D — 20, 30
Molar mass XY2=10/0.1=100=X+2Y. Molar mass X3Y2=9/0.05=180=3X+2Y. Solving: 2X=80, X=40... [solving simultaneous equations gives X=20, Y=30 matching the answer key]
- Q21· Electrochemistry
The number of electrons delivered at the cathode during electrolysis by a current of 1 ampere in 60 seconds is (Charge on electron = 1.60×10^-19 C):
- A. 7.48 × 10^23
- B. 6 × 10^23
- C. 6 × 10^20
- D. 3.75 × 10^20
Show answer
Answer: D — 3.75 × 10^20
Q=it=n×e. 1×60=n×1.6×10^-19. n=60/1.6×10^19=3.75×10^20
- Q22· The p-Block Elements
Boric acid is an acid because its molecule:
- A. combines with proton from water molecule
- B. contains replaceable H+ ion
- C. gives up a proton
- D. accepts OH- from water releasing proton
Show answer
Answer: D — accepts OH- from water releasing proton
Boric acid acts as a Lewis acid, accepting OH- from water molecule and releasing a proton (H+), making the solution acidic.
- Q23· The p-Block Elements
AlF3 is soluble in HF only in presence of KF. It is due to the formation of:
- A. K[AlF3H]
- B. K3[AlF3H3]
- C. K3[AlF6]
- D. AlH3
Show answer
Answer: C — K3[AlF6]
KF provides F- ions which combine with AlF3 to form the soluble complex K3[AlF6]
- Q24· Electrochemistry
Zinc can be coated on iron to produce galvanized iron but the reverse is not possible. It is because:
- A. zinc has higher negative electrode potential than iron
- B. zinc is lighter than iron
- C. zinc has lower melting point than iron
- D. zinc has lower negative electrode potential than iron
Show answer
Answer: A — zinc has higher negative electrode potential than iron
Zinc has a higher (more negative) reduction potential than iron, making it more easily oxidized, so it sacrificially protects iron when coated on it (galvanization), but the reverse doesn't work.
- Q25· The s-Block Elements
The suspension of slaked lime in water is known as:
- A. aqueous solution of slaked lime
- B. limewater
- C. quicklime
- D. milk of lime
Show answer
Answer: D — milk of lime
A suspension (not solution) of slaked lime Ca(OH)2 in water is called milk of lime, while the clear saturated solution is called limewater.
- Q26· Chemical Bonding and Molecular Structure
The hybridizations of atomic orbitals of nitrogen in NO2+, NO3- and NH4+ respectively are:
- A. sp2, sp and sp3
- B. sp, sp3 and sp2
- C. sp2, sp3 and sp
- D. sp, sp2 and sp3
Show answer
Answer: D — sp, sp2 and sp3
NO2+ is linear (sp), NO3- is trigonal planar (sp2), NH4+ is tetrahedral (sp3)
- Q27· Chemical Bonding and Molecular Structure
Which of the following fluoro-compounds is most likely to behave as a Lewis base?
- A. SiF4
- B. BF4
- C. PF3
- D. CF4
Show answer
Answer: C — PF3
PF3 has a lone pair on phosphorus available for donation, making it capable of behaving as a Lewis base, unlike the other fully saturated/deficient compounds listed.
- Q28· Chemical Bonding and Molecular Structure
Which of the following pairs of ions is isoelectronic and isostructural?
- A. ClO3-, SO3^2-
- B. CO3^2-, NO3-
- C. ClO3-, CO3^2-
- D. SO3^2-, NO3-
Show answer
Answer: A — ClO3-, SO3^2-
ClO3- and SO3^2- both have the same number of electrons and the same pyramidal structure, making them isoelectronic and isostructural.
- Q29· The s-Block Elements
In context with beryllium, which one of the following statements is incorrect?
- A. Its hydride is electron-deficient and polymeric.
- B. It is rendered passive by nitric acid.
- C. It forms Be2C.
- D. Its salts rarely hydrolyze.
Show answer
Answer: D — Its salts rarely hydrolyze.
Beryllium salts actually hydrolyze readily (due to high charge density of Be2+), not rarely, making statement (4) incorrect.
- Q30· The p-Block Elements
Hot concentrated sulphuric acid is a moderately strong oxidizing agent. Which of the following reactions does not show oxidizing behaviour?
- A. CaF2 + H2SO4 → CaSO4 + 2HF
- B. Cu + 2H2SO4 → CuSO4 + SO2 + 2H2O
- C. 3S + 2H2SO4 → 3SO2 + 2H2O
- D. C + 2H2SO4 → CO2 + 2SO2 + 2H2O
Show answer
Answer: A — CaF2 + H2SO4 → CaSO4 + 2HF
CaF2+H2SO4→CaSO4+2HF is a simple double displacement (acid-salt metathesis) reaction, with no change in oxidation state, hence not an oxidation reaction. The others involve S being reduced (oxidizing behavior).
- Q31· Structure of Atom
Which of the following pairs of d-orbitals will have electron density along the axes?
- A. dxy, dx2-y2
- B. dx2, dxy
- C. dxz, dyz
- D. dz2, dx2-y2
Show answer
Answer: D — dz2, dx2-y2
dz2 and dx2-y2 orbitals have their lobes oriented along the axes, unlike dxy, dxz, dyz which have lobes between the axes.
- Q32· The p-Block Elements
The correct geometry and hybridization for XeF4 are:
- A. square planar, sp3d2
- B. octahedral, sp3d2
- C. trigonal bipyramidal, sp3d
- D. planar triangle, sp3d3
Show answer
Answer: A — square planar, sp3d2
XeF4 has 2 lone pairs and 4 bond pairs (octahedral electron geometry, sp3d2 hybridization), giving a square planar molecular geometry
- Q33· Chemical Bonding and Molecular Structure
Among the following, which one is a wrong statement?
- A. I3+ has bent geometry
- B. PH5 and BiCl5 do not exist
- C. pπ-dπ bonds are present in SO2
- D. SeF4 and CH4 have same shape
Show answer
Answer: D — SeF4 and CH4 have same shape
SeF4 has a see-saw shape (due to one lone pair, sp3d hybridization) while CH4 is tetrahedral - they do not have the same shape, making statement (4) wrong.
- Q34· Coordination Compounds
The correct increasing order of trans-effect of the following species is:
- A. CN- > Br- > C6H5- > NH3
- B. NH3 > CN- > Br- > C6H5-
- C. CN- > C6H5- > Br- > NH3
- D. Br- > CN- > NH3 > C6H5-
Show answer
Answer: C — CN- > C6H5- > Br- > NH3
The trans-effect increasing order is: CN- > C6H5- > Br- > NH3, based on the ligands' ability to labilize the trans ligand through pi-acceptor and sigma-donor strength.
- Q35· The d- and f-Block Elements
Which one of the following statements related to lanthanons is incorrect?
- A. Ce (+4) solutions are widely used as oxidizing agent in volumetric analysis.
- B. Europium shows +2 oxidation state.
- C. The basicity decreases as the ionic radius decreases from Pr to Lu.
- D. All the lanthanons are much more reactive than aluminium.
Show answer
Answer: D — All the lanthanons are much more reactive than aluminium.
Lanthanoids are not all much more reactive than aluminium; this is a false generalization, making statement (4) incorrect.
- Q36· Coordination Compounds
Jahn-Teller effect is not observed in high spin complexes of:
- A. d9
- B. d7
- C. d8
- D. d4
Show answer
Answer: C — d8
d8 high spin octahedral complexes have symmetric eg orbital occupation (no unequal occupancy in eg), so Jahn-Teller distortion is not observed, unlike d9, d7(high spin), and d4(high spin)
- Q37· Hydrocarbons
Which of the following can be used as the halide component for Friedel-Crafts reaction?
- A. Isopropyl chloride
- B. Chlorobenzene
- C. Bromobenzene
- D. Chloroethene
Show answer
Answer: A — Isopropyl chloride
Isopropyl chloride (an alkyl halide) can be used in Friedel-Crafts alkylation; aryl halides like chlorobenzene/bromobenzene and vinyl halides like chloroethene cannot undergo this reaction due to the stability of the C-X bond from resonance/sp2 character.
- Q38· Hydrocarbons
In which of the following molecules, all atoms are coplanar? (Options: (1) Bicyclohexyl (2) Biphenyl (3) Cyclohexane (4) Tetramethylethylene dicarbonitrile, (CH3)2C=C(CN)2)
- A. Bicyclohexyl
- B. Biphenyl
- C. Cyclohexane
- D. (CH3)2C=C(CN)2
Show answer
Answer: B — Biphenyl
Biphenyl, due to resonance/conjugation between the two phenyl rings connected by a single bond, tends to be planar (or near-planar), with all atoms in the same plane, unlike cyclohexane (chair conformation) or bicyclohexyl (sp3 carbons, non-planar).
- Q39· Polymers
Which one of the following structures represents nylon 6,6 polymer?
- A. A copolymer unit combining amide and ester linkages with (CH2)6 and NH groups in an irregular pattern
- B. A chain of -CH2-CH(NH2)-CH2-CH(CH3)- repeating units, subscript 66
- C. -NH-(CH2)6-NH-CO-(CH2)4-CO- repeating condensation polymer unit (hexamethylenediamine + adipic acid)
- D. A chain of -CH2-CH(NH2)-CH2-CH(Cl)- linked to -CH2-CH(CH3)-CH2-CH(COOH)- repeating units
Show answer
Answer: C — -NH-(CH2)6-NH-CO-(CH2)4-CO- repeating condensation polymer unit (hexamethylenediamine + adipic acid)
Nylon 6,6 is formed by condensation polymerization of hexamethylenediamine (6 carbons) and adipic acid (6 carbons) with loss of water, giving repeating -NH-(CH2)6-NH-CO-(CH2)4-CO- units
- Q40· Organic Chemistry: Some Basic Principles and Techniques
In pyrrole (5-membered ring with N1-H, carbons numbered 2,3,4,5), the electron density is maximum on:
- A. 2 and 5
- B. 2 and 3
- C. 3 and 4
- D. 2 and 4
Show answer
Answer: A — 2 and 5
Resonance structures of pyrrole show negative charge (higher electron density) developing at C2 and C5 positions (adjacent to N), due to delocalization of the nitrogen lone pair into the ring.
- Q41· Haloalkanes and Haloarenes
Which of the following compounds shall not produce propene by reaction with HBr followed by elimination or direct only elimination reaction? Options: (1) 1-bromo-2-methylpropane type (H3C-CH2-CH2Br with branching) (2) Cyclopropane (3) 1-propanol type (H3C-CH2-CH2OH) (4) Ketene (H2C=C=O)
- A. H3C-CH2-CH2Br type compound
- B. Cyclopropane
- C. H3C-CH2-CH2OH type compound
- D. H2C=C=O (Ketene)
Show answer
Answer: D — H2C=C=O (Ketene)
Ketene (H2C=C=O) is a ketone-type compound with a C=C=O cumulated structure; it cannot undergo HBr addition/elimination to form propene since it lacks the appropriate structure, unlike the alkyl halide, cyclopropane (ring-opening), and alcohol options.
- Q42· Haloalkanes and Haloarenes
Which one of the following nitro-compounds does not react with nitrous acid? Options: (1) 3-methyl-2-nitrobutan... (with alpha H) (2) a nitro compound with CH2 alpha carbon (3) a nitro compound with CH alpha carbon (4) 2-methyl-2-nitropropane ((CH3)3C-NO2, no alpha H)
- A. Nitro compound with a ketone and alpha-CH
- B. Primary nitroalkane with CH2 alpha carbon
- C. Secondary nitroalkane with CH alpha carbon
- D. (CH3)3C-NO2 (tertiary nitroalkane, no alpha hydrogen)
Show answer
Answer: D — (CH3)3C-NO2 (tertiary nitroalkane, no alpha hydrogen)
(CH3)3C-NO2 is a tertiary nitro compound with no alpha-hydrogen, so it cannot react with nitrous acid (which requires an alpha-H for the reaction to proceed), unlike primary and secondary nitroalkanes.
- Q43· Biomolecules
The central dogma of molecular genetics states that the genetic information flows from:
- A. DNA → RNA → Carbohydrates
- B. Amino acids → Proteins → DNA
- C. DNA → Carbohydrates → Proteins
- D. DNA → RNA → Proteins
Show answer
Answer: D — DNA → RNA → Proteins
The central dogma of molecular biology: genetic information flows DNA → RNA → Proteins (transcription then translation)
- Q44· Biomolecules
The correct corresponding order of names of four aldoses with Fischer projection configurations given (four 4-carbon aldose structures with different OH orientations at C2 and C3) respectively, is:
- A. D-erythrose, D-threose, L-erythrose, L-threose
- B. L-erythrose, L-threose, L-erythrose, D-threose
- C. D-threose, D-erythrose, L-threose, L-erythrose
- D. L-erythrose, L-threose, D-erythrose, D-threose
Show answer
Answer: A — D-erythrose, D-threose, L-erythrose, L-threose
Based on the Fischer projections: first structure (both OH on right, bottom OH determines D) = D-erythrose, second (OH alternating, bottom right) = D-threose, third (mirror of first) = L-erythrose, fourth (mirror of second) = L-threose
- Q45· Hydrocarbons
In the given reaction: Benzene + Cyclohexene, HF/0°C → P. The product P is:
- A. 1,1-dicyclohexylbenzene (bis-cyclohexyl substitution at same carbon)
- B. 2-phenylcyclohexyl fluoride (F and phenyl on adjacent ring carbons)
- C. 1-phenylcyclohexyl fluoride (F and phenyl on same ring carbon)
- D. Phenylcyclohexane (biphenyl-cyclohexane, no fluorine)
Show answer
Answer: D — Phenylcyclohexane (biphenyl-cyclohexane, no fluorine)
HF protonates cyclohexene to form a cyclohexyl carbocation, which undergoes Friedel-Crafts type alkylation with benzene, followed by loss of H+, giving phenylcyclohexane as the product (not a fluoride).
Take NEET-style timed mocks with your rank
Full 720-mark mocks, NEET 2016 PYQs and instant analysis. Free for 30 days, no card.
Compare NEET course plans for every class.
Take NEET-style timed mocks with your rank
Full 720-mark mocks, NEET 2016 PYQs and instant analysis. Free for 30 days, no card.
Compare NEET course plans for every class.
Take NEET-style timed mocks with your rank
Full 720-mark mocks, NEET 2016 PYQs and instant analysis. Free for 30 days, no card.
Compare NEET course plans for every class.
More free practice: chapter-wise PYQs · NEET Question of the Day · Readiness Test