NEET 2016 Physics Question Paper with Answers
Updated 18 Nov 2026
45 NEET 2016 Physics questions with the correct answer and an explanation for each, chapter-wise. Tap “Show answer” under each question. No login needed.
- Q1· Ray Optics and Optical Instruments
A person can see clearly objects only when they lie between 50 cm and 400 cm from his eyes. In order to increase the maximum distance of distinct vision to infinity, the type and power of the correcting lens, the person has to use, will be:
- A. Convex, +0.15 diopter
- B. Convex, +2.25 diopter
- C. Concave, -0.25 diopter
- D. Concave, -0.2 diopter
Show answer
Answer: C — Concave, -0.25 diopter
For object at infinity to form image at the far point (400 cm = -400 cm), using 1/v - 1/u = 1/f with u = -∞, v = -400 cm: 1/f = 1/(-400) - 0, so P = 1/f (in m) = -0.25 D, a concave (diverging) lens.
- Q2· Wave Optics
A linear aperture whose width is 0.02 cm is placed immediately in front of a lens of focal length 60 cm. The aperture is illuminated normally by a parallel beam of wavelength 5×10⁻⁵ cm. The distance of the first dark band of the diffraction pattern from the centre of the screen is:
- A. 0.15 cm
- B. 0.10 cm
- C. 0.25 cm
- D. 0.20 cm
Show answer
Answer: A — 0.15 cm
For single-slit diffraction, the first dark fringe position is y = λD/d, where D is the focal length (distance to screen) and d is the slit width. Substituting d=0.02 cm, λ=5×10⁻⁵ cm, D=60 cm: y = (5×10⁻⁵ × 60)/0.02 = 0.15 cm.
- Q3· Dual Nature of Radiation and Matter
Electron of mass m with de-Broglie wavelength λ falls on the target in an X-ray tube. The cutoff wavelength (λ₀) of the emitted X-ray is:
- A. λ₀ = λ
- B. λ₀ = 2mcλ²/h
- C. λ₀ = 2h/mc
- D. λ₀ = 2m²c²λ²/h²
Show answer
Answer: B — λ₀ = 2mcλ²/h
The electron's kinetic energy KE = h²/(2mλ²) (from de-Broglie relation λ=h/p). Cutoff wavelength: hc/λ₀ = KE = h²/(2mλ²), solving gives λ₀ = 2mcλ²/h.
- Q4· Dual Nature of Radiation and Matter
Photons with energy 5 eV are incident on a cathode C in a photoelectric cell. The maximum energy of emitted photoelectrons is 2 eV. When photons of energy 6 eV are incident on C, no photoelectrons will reach the anode A, if the stopping potential of A relative to C is:
- A. -3 V
- B. +3 V
- C. +4 V
- D. -1 V
Show answer
Answer: A — -3 V
Using Ei = W + KE: 5 = W + 2, so work function W = 3 eV. For 6 eV photons: KE_max = 6 - 3 = 3 eV. For no electrons to reach anode, stopping potential must equal -3 V (A at -3V relative to C).
- Q5· Atoms
If an electron in a hydrogen atom jumps from the 3rd orbit to the 2nd orbit, it emits a photon of wavelength λ. When it jumps from the 4th orbit to the 3rd orbit, the corresponding wavelength of the photon will be:
- A. (20/13)λ
- B. (16/25)λ
- C. (9/16)λ
- D. (20/7)λ
Show answer
Answer: D — (20/7)λ
Using 1/λ = R(1/n1² - 1/n2²): For 3→2, 1/λ = R(1/4-1/9) = 5R/36. For 4→3, 1/λ' = R(1/9-1/16) = 7R/144. Dividing: λ'/λ = (5/36)/(7/144) = (5×144)/(36×7) = 20/7. So λ' = (20/7)λ.
- Q6· Nuclei
The half-life of a radioactive substance is 30 minutes. The time (in minutes) taken between 40% decay and 85% decay of the same radioactive substance is:
- A. 60
- B. 15
- C. 30
- D. 45
Show answer
Answer: A — 60
At 40% decay, 60% remains: 0.6 = 2^(-t1/30). At 85% decay, 15% remains: 0.15 = 2^(-t2/30). Using logs, t1/t2 = log(0.6)/log(0.15) ratio works out so that t2 - t1 = 60 minutes (t1≈19.2 min from start to 40% decay, t2≈79.2 min from start to 85% decay, difference = 60 min).
- Q7· Semiconductor Electronics
For CE transistor amplifier, the audio signal voltage across the collector resistance of 2 kΩ is 4V. If the current amplification factor of the transistor is 100 and the base resistance is 1 kΩ, then the input signal voltage is:
- A. 15 mV
- B. 10 mV
- C. 20 mV
- D. 30 mV
Show answer
Answer: C — 20 mV
Collector current Ic = V/Rc = 4/2000 = 2×10⁻³ A. Base current Ib = Ic/β = 2×10⁻³/100 = 2×10⁻⁵ A. Input voltage Vb = Ib × Rb = 2×10⁻⁵ × 1000 = 2×10⁻² V = 20 mV.
- Q8· Semiconductor Electronics
The given circuit has two ideal diodes connected as shown in the figure below (10V source, R1=2Ω in series, then D1 with 3Ω and D2 with 2Ω in parallel branches to ground). The current flowing through the resistance R1 will be:
- A. 3.13 A
- B. 2.5 A
- C. 10.0 A
- D. 1.43 A
Show answer
Answer: B — 2.5 A
D1 is reverse biased (blocks current through the 3Ω branch) and D2 is forward biased (conducts through the 2Ω branch). So effective circuit is 10V across R1(2Ω) + 2Ω in series = 4Ω total. Current I = 10/4 = 2.5 A.
- Q9· Semiconductor Electronics
What is the output Y in the following circuit (A, B fed into a NAND/AND gate P, output AB combined with input C into a second NAND gate Q, giving Y = NOT(ABC)) when all the three inputs A, B, C are first 0 and then 1?
- A. 1, 1
- B. 0, 1
- C. 0, 0
- D. 1, 0
Show answer
Answer: D — 1, 0
Y = NOT(A·B·C) = A' + B' + C' (De Morgan's). When A=B=C=0: Y = NOT(0) = 1. When A=B=C=1: Y = NOT(1) = 0. So the outputs are 1, then 0.
- Q10· Units and Measurements
Planck's constant (h), speed of light in vacuum (c) and Newton's gravitational constant (G) are three fundamental constants. Which of the following combinations of these has the dimension of length?
- A. √(Ge/h^(3/2))
- B. √(hG)/c^(3/2)
- C. √(hG)/c^(5/2)
- D. √(hc/G)
Show answer
Answer: B — √(hG)/c^(3/2)
Setting M⁰L⁰T⁰... combining h (M L²T⁻¹), G (M⁻¹L³T⁻²), c (LT⁻¹) dimensionally to get length: √(hG)/c^(3/2) works out to give dimension L (this combination is related to the Planck length formula).
- Q11· Kinematics
Two cars P and Q start from a point at the same time in a straight line and their positions are represented by x_P(t) = at + bt² and x_Q(t) = ft - t². At what time do the cars have the same velocity?
- A. (f-a)/(2(1+b))
- B. (a-f)/(1+b)
- C. (a+f)/(2(b-1))
- D. (a+f)/(2(1+b))
Show answer
Answer: A — (f-a)/(2(1+b))
Velocity of P: v_P = a + 2bt. Velocity of Q: v_Q = f - 2t. Setting equal: a + 2bt = f - 2t → t(2b+2) = f-a → t = (f-a)/(2(b+1)) = (f-a)/(2(1+b)).
- Q12· Kinematics
In the given figure, a = 15 m/s² represents the total acceleration of a particle moving in the clockwise direction in a circle of radius R = 2.5 m at a given instant of time, with the acceleration vector making a 30° angle with the radius. The speed of the particle is:
- A. 6.2 m/s
- B. 4.5 m/s
- C. 5.0 m/s
- D. 5.7 m/s
Show answer
Answer: D — 5.7 m/s
Total acceleration a_r² + a_t² = 225 (15²). Since tan30° = a_t/a_r, a_r = a_t√3, giving (4/3)a_r² = 225, so a_r² = 168.75, a_r = 7.5√3/... solving: a_r = (15/2)√3 ≈ 12.99 m/s². Using v²/R = a_r: v² = 15×2.5×√3/2 ≈ 32.48, v ≈ 5.7 m/s.
- Q13· Laws of Motion
A rigid ball of mass m strikes a rigid wall at 60° and gets reflected without loss of speed as shown in the figure (incoming and outgoing velocity V each making 60° with the wall's normal/horizontal). The value of impulse imparted by the wall on the ball will be:
- A. mV/3
- B. mV
- C. 2mV
- D. mV/2
Show answer
Answer: B — mV
Only the component of velocity perpendicular to the wall reverses; components parallel to the wall cancel. Change in momentum (impulse) = 2mV cos60° = 2mV×(1/2) = mV.
- Q14· Work, Energy and Power
A bullet of mass 10 g moving horizontally with a velocity of 400 ms⁻¹ strikes a wooden block of mass 2 kg which is suspended by a light inextensible string of length 5 m. As a result, the centre of gravity of the block is found to rise a vertical distance of 10 cm. The speed of the bullet after it emerges out horizontally from the block will be:
- A. 160 ms⁻¹
- B. 100 ms⁻¹
- C. 80 ms⁻¹
- D. 120 ms⁻¹
Show answer
Answer: D — 120 ms⁻¹
Block's velocity after bullet passes through, from energy conservation: V²=2gh=2×9.8×0.1, V≈1.4 m/s. Using momentum conservation: (0.01×400) = 2×1.4 + 0.01×V', so 4 = 2.8 + 0.01V', giving V' = 120 m/s.
- Q15· Work, Energy and Power
Two identical balls A and B having velocities of 0.5 m/s and -0.3 m/s respectively collide elastically in one dimension. The velocities of B and A after the collision respectively will be:
- A. 0.3 m/s and 0.5 m/s
- B. -0.5 m/s and 0.3 m/s
- C. 0.5 m/s and -0.3 m/s
- D. -0.3 m/s and 0.5 m/s
Show answer
Answer: C — 0.5 m/s and -0.3 m/s
For an elastic collision between two identical masses, the velocities are simply interchanged. So A's final velocity = -0.3 m/s, B's final velocity = 0.5 m/s. Since the question asks for B then A: 0.5 m/s and -0.3 m/s.
- Q16· Work, Energy and Power
A particle moves from a point (-2î+5ĵ) to (4ĵ+3k̂) when a force of (4î+3ĵ) N is applied. How much work has been done by the force?
- A. 2 J
- B. 8 J
- C. 11 J
- D. 5 J
Show answer
Answer: D — 5 J
Displacement Δr = r2-r1 = (4ĵ+3k̂)-(-2î+5ĵ) = 2î-ĵ+3k̂. Work W = F·Δr = (4î+3ĵ)·(2î-ĵ+3k̂) = 8-3+0 = 5 J.
- Q17· System of Particles and Rotational Motion
Two rotating bodies A and B of masses m and 2m with moments of inertia I_A and I_B (I_B > I_A) have equal kinetic energy of rotation. If L_A and L_B be their angular momenta respectively, then:
- A. L_A > L_B
- B. L_A = L_B/2
- C. L_A = 2L_B
- D. L_B > L_A
Show answer
Answer: D — L_B > L_A
Rotational KE = L²/(2I), so for equal KE, L ∝ √I. Since I_B > I_A, it follows that L_B > L_A.
- Q18· System of Particles and Rotational Motion
A solid sphere of mass m and radius R is rotating about its diameter. A solid cylinder of the same mass and same radius is also rotating about its geometrical axis with an angular speed twice that of the sphere. The ratio of their kinetic energies of rotation (E_sphere/E_cylinder) will be:
- A. 3:1
- B. 2:3
- C. 1:5
- D. 1:4
Show answer
Answer: C — 1:5
E_sphere = (1/2)(2/5)mR²ω_s², E_cylinder = (1/2)(1/2)mR²(2ω_s)² = (1/2)(1/2)mR²·4ω_s². Ratio = [(2/5)ω_s²]/[2ω_s²] = (2/5)/2 = 1/5.
- Q19· System of Particles and Rotational Motion
A light rod of length l has two masses m1 and m2 attached to its two ends. The moment of inertia of the system about an axis perpendicular to the rod and passing through the centre of mass is:
- A. √(m1m2) l²
- B. (m1m2/(m1+m2)) l²
- C. ((m1+m2)/(m1m2)) l²
- D. (m1+m2) l²
Show answer
Answer: B — (m1m2/(m1+m2)) l²
With r1 = m2·l/(m1+m2) and r2 = m1·l/(m1+m2) (distances from COM), I = m1r1² + m2r2² = (m1m2/(m1+m2))l².
- Q20· Gravitation
Starting from the centre of the earth having radius R, the variation of g (acceleration due to gravity) with distance r is shown by which graph?
- A. g rises then stays flat from 0 to R, then decreases smoothly beyond R
- B. g rises linearly from 0 to a peak at R then falls linearly beyond R (symmetric triangle)
- C. g rises linearly from 0 to a peak at R then falls off as a curve (1/r²) beyond R
- D. g rises steeply with a sharp cusp peak at R then falls off as a curve beyond R
Show answer
Answer: C — g rises linearly from 0 to a peak at R then falls off as a curve (1/r²) beyond R
Inside the earth, g increases linearly with r (g_in = gr/R), reaching maximum at the surface (r=R). Beyond the surface, g decreases as 1/r² (g_out = gR²/r²). This matches the graph showing a linear rise to R followed by a curved (inverse square) decline.
- Q21· Gravitation
A satellite of mass m is orbiting the earth (of radius R) at a height h from its surface. The total energy of the satellite in terms of g0, the value of acceleration due to gravity at the earth's surface, is:
- A. -2mg0R²/(R+h)
- B. mg0R²/(2(R+h))
- C. -mg0R²/(2(R+h))
- D. 2mg0R²/(R+h)
Show answer
Answer: C — -mg0R²/(2(R+h))
Total energy TE = KE + PE = (1/2)mv0² - GMm/(R+h). Since v0² = GM/(R+h), TE = (1/2)m[GM/(R+h)] - GMm/(R+h) = -GMm/(2(R+h)) = -mg0R²/(2(R+h)), using GM = g0R².
- Q22· Mechanical Properties of Fluids
A rectangular film of liquid is extended from (4cm × 2cm) to (5cm × 4cm). If the work done is 3×10⁻⁴ J, the value of the surface tension of the liquid is:
- A. 8.0 N/m
- B. 0.250 N/m
- C. 0.125 N/m
- D. 0.2 N/m
Show answer
Answer: C — 0.125 N/m
Work done W = 2TΔA (factor of 2 for two surfaces of the film). ΔA = (5×4 - 4×2) cm² = (20-8) cm² = 12 cm² = 12×10⁻⁴ m². So 3×10⁻⁴ = 2×T×12×10⁻⁴, giving T = 3/24 = 0.125 N/m.
- Q23· Mechanical Properties of Fluids
Three liquids of densities ρ1, ρ2 and ρ3 (with ρ1 > ρ2 > ρ3), having the same value of surface tension T, rise to the same height in three identical capillaries. The angles of contact θ1, θ2 and θ3 obey:
- A. π > θ1 > θ2 > θ3 > π/2
- B. π/2 > θ1 > θ2 > θ3 ≥ 0
- C. 0 ≤ θ1 < θ2 < θ3 < π/2
- D. π/2 < θ1 < θ2 < θ3 < π
Show answer
Answer: C — 0 ≤ θ1 < θ2 < θ3 < π/2
From 2Tcosθ = hρgr, with T, h, r constant, cosθ ∝ ρ. Since ρ1>ρ2>ρ3, cosθ1>cosθ2>cosθ3, which means θ1<θ2<θ3 (all acute, i.e. less than π/2 since cosθ is positive).
- Q24· Thermal Properties of Matter
Two identical bodies are made of a material for which the heat capacity increases with temperature. One of these is at 100°C, while the other one is at 0°C. If the two bodies are brought into contact, then, assuming no heat loss, the final common temperature is:
- A. 0°C
- B. 50°C
- C. More than 50°C
- D. Less than 50°C but greater than 0°C
Show answer
Answer: C — More than 50°C
Since heat capacity increases with temperature, the hotter body (100°C) has a higher heat capacity, so it loses less temperature change for the same heat transferred compared to the colder body gaining; the equilibrium temperature shifts closer to the hotter body's value, making it more than 50°C.
- Q25· Thermal Properties of Matter
A body cools from a temperature 3T to 2T in 10 minutes. The room temperature is T. Assume that Newton's law of cooling is applicable. The temperature of the body at the end of next 10 minutes will be:
- A. T
- B. (7/4)T
- C. (3/2)T
- D. (4/3)T
Show answer
Answer: C — (3/2)T
Using Newton's law of cooling with average temperature approximation over each interval, solving dT/dt = K(T_avg - T) for both 10-minute intervals gives the body's temperature after the second interval as (3/2)T.
- Q26· Thermodynamics
One mole of an ideal monatomic gas undergoes a process described by the equation PV³ = constant. The heat capacity of the gas during this process is:
- A. R
- B. (3/2)R
- C. (5/2)R
- D. 2R
Show answer
Answer: A — R
For a polytropic process PVˣ = constant (here x=3), molar heat capacity C = Cv + R/(1-x) = (3/2)R + R/(1-3) = (3/2)R - R/2 = R.
- Q27· Thermodynamics
The temperature inside a refrigerator is t2°C and the room temperature is t1°C. The amount of heat delivered to the room for each joule of electrical energy consumed ideally will be:
- A. (t1+t2)/(t1+273)
- B. t1/(t1-t2)
- C. (t1+273)/(t1-t2)
- D. (t2+273)/(t1-t2)
Show answer
Answer: C — (t1+273)/(t1-t2)
For an ideal refrigerator, Q1/W = T1/(T1-T2) where T1=t1+273 (room, in Kelvin) and T2=t2+273 (inside fridge). So Q1/W = (t1+273)/(t1-t2).
- Q28· Kinetic Theory
A given sample of an ideal gas occupies a volume V at a pressure P and absolute temperature T. The mass of each molecule of the gas is m. Which of the following gives the density of the gas?
- A. mKT
- B. P/(kT)
- C. Pm/(kT)
- D. P/(kTV)
Show answer
Answer: C — Pm/(kT)
Using P = ρRT/M with M = NA·m and R/NA = k (Boltzmann constant): P = ρkT/m, so density ρ = Pm/(kT).
- Q29· Oscillations
A body of mass m is attached to the lower end of a spring whose upper end is fixed. The spring has negligible mass. When the mass m is slightly pulled down and released, it oscillates with a time period of 3s. When the mass m is increased by 1kg, the time period of oscillations becomes 5s. The value of m in kg is:
- A. 9/16
- B. 3/4
- C. 4/3
- D. 16/9
Show answer
Answer: A — 9/16
T=2π√(m/k)=3 and 2π√((m+1)/k)=5. Dividing: √((m+1)/m)=5/3, so (m+1)/m = 25/9, giving 1/m=16/9, so m=9/16 kg.
- Q30· Waves
The second overtone of an open organ pipe has the same frequency as the first overtone of a closed pipe L metre long. The length of the open pipe will be:
- A. 4L
- B. L
- C. 2L
- D. L/2
Show answer
Answer: C — 2L
Second overtone of open pipe (3rd harmonic): f = 3v/(2l0). First overtone of closed pipe (3rd harmonic): f = 3v/(4L). Setting equal: 3v/(2l0) = 3v/(4L), so l0 = 2L.
- Q31· Waves
Three sound waves of equal amplitudes have frequencies (n-1), n, (n+1). They superimpose to give beats. The number of beats produced per second will be:
- A. 2
- B. 1
- C. 4
- D. 3
Show answer
Answer: A — 2
The number of beats per second equals the maximum difference between any two frequencies present. Here the max difference is between (n-1) and (n+1), which is 2.
- Q32· Electrostatic Potential and Capacitance
An electric dipole is placed at an angle of 30° with an electric field intensity 2×10⁵ N/C. It experiences a torque equal to 4 Nm. The charge on the dipole, if the dipole length is 2 cm, is:
- A. 4 μC
- B. 5 mC
- C. 2 mC
- D. 5 mC
Show answer
Answer: C — 2 mC
Torque τ = pE sinθ, so dipole moment p = τ/(E sinθ) = 4/(2×10⁵×0.5) = 4×10⁻⁵ C·m. Since p = qd, q = p/d = 4×10⁻⁵/(2×10⁻²) = 2×10⁻³ C = 2 mC.
- Q33· Electrostatic Potential and Capacitance
A parallel-plate capacitor of area A, plate separation d and capacitance C is filled with four dielectric materials having dielectric constants k1, k2, k3 and k4 as shown in the figure (k1, k2, k3 each occupy A/3 width in the top half of thickness d/2, side by side; k4 occupies the full area A in the bottom half of thickness d/2). If a single dielectric material is to be used to have the same capacitance C in this capacitor, then its dielectric constant k is given by:
- A. 1/k = 1/k1 + 1/k2 + 1/k3 + 3/(2k4)
- B. k = k1+k2+k3+3k4
- C. k = (2/3)(k1+k2+k3)+2k4
- D. 2/k = 3/(k1+k2+k3) + 1/k4
Show answer
Answer: D — 2/k = 3/(k1+k2+k3) + 1/k4
The top half has three capacitors (k1,k2,k3 each area A/3, thickness d/2) in parallel, giving C_top = (k1+k2+k3)ε0(A/3)/(d/2). The bottom half (k4, full area A, thickness d/2) gives C_bottom = k4ε0A/(d/2). These two halves are in series. Equating to a single dielectric k with the same C and simplifying gives 2/k = 3/(k1+k2+k3) + 1/k4.
- Q34· Current Electricity
In a circuit, current flows from A through a 2Ω resistor, then through a 3V cell (+ to - in direction of current), then through a 1Ω resistor, to B, with 4A current flowing through the circuit. The potential difference (V_A - V_B) between the points A and B in the given figure is:
- A. +9 V
- B. -3 V
- C. +3 V
- D. +6 V
Show answer
Answer: A — +9 V
V_A - V_B = sum of IR drops and EMF in the path = 4(2) + 3 + 4(1) = 8+3+... reconsidering as drop across each element = 4+3+2 = 9V (using given current and standard circuit addition along the path).
- Q35· Current Electricity
A filament bulb (500W, 100V) is to be used in a 230V main supply. When a resistance R is connected in series, it works perfectly and the bulb consumes 500W. The value of R is:
- A. 13 Ω
- B. 230 Ω
- C. 46 Ω
- D. 26 Ω
Show answer
Answer: D — 26 Ω
Bulb resistance Rb = V²/P = 100×100/500 = 20Ω. Current through bulb for rated power i = P/V = 500/100 = 5A. Total circuit: 230 = i(Rb+R) = 5(20+R), so 46 = 20+R, giving R = 26Ω.
- Q36· Moving Charges and Magnetism
A long wire carrying a steady current is bent into a circular loop of one turn. The magnetic field at the centre of the loop is B. It is then bent into a circular coil of n turns. The magnetic field at the centre of this coil of n turns will be:
- A. 2n²B
- B. nB
- C. n²B
- D. 2nB
Show answer
Answer: C — n²B
Same wire length l=2πr is now divided into n turns of radius r2=r/n. New field B' = μ0ni/(2r2) = μ0ni/(2r/n) = n²(μ0i/2r) = n²B.
- Q37· Magnetism and Matter
A bar magnet is hung by a thin cotton thread in a uniform horizontal magnetic field and is in equilibrium state. The energy required to rotate it by 60° is W. Now the torque required to keep the magnet in this new position is:
- A. 2W/√3
- B. W/√3
- C. √3 W
- D. (√3/2)W
Show answer
Answer: C — √3 W
W = PE[cos0° - cos60°] = PE(1-1/2) = PE/2, so PE = 2W. Torque at 60°: T = PE sin60° = 2W×(√3/2) = √3 W.
- Q38· Moving Charges and Magnetism
An electron is moving in a circular path under the influence of a transverse magnetic field of 3.57×10⁻² T. If the value of e/m is 1.76×10¹¹ C/kg, the frequency of revolution of the electron is:
- A. 6.28 MHz
- B. 1 GHz
- C. 100 MHz
- D. 62.8 MHz
Show answer
Answer: B — 1 GHz
Frequency f = qB/(2πm) = (e/m)×B/(2π) = (1.76×10¹¹ × 3.57×10⁻²)/(2π) = 6.28×10⁹/6.28 = 1×10⁹ Hz = 1 GHz.
- Q39· Alternating Current
Which of the following combinations should be selected for better tuning of an L-C-R circuit used for communication?
- A. R=25Ω, L=1.5H, C=45μF
- B. R=20Ω, L=1.5H, C=35μF
- C. R=25Ω, L=2.5H, C=45μF
- D. R=15Ω, L=3.5H, C=30μF
Show answer
Answer: D — R=15Ω, L=3.5H, C=30μF
Quality factor Q = (1/R)√(L/C) is greatest when resistance R is minimum and L/C ratio is large. Option D has the lowest R (15Ω) with high L, giving the best (sharpest) tuning.
- Q40· Electromagnetic Induction
A uniform magnetic field is restricted within a region of radius r. The magnetic field changes with time at a rate dB/dt. Loop 1 of radius R > r encloses the region r and loop 2 of radius R is outside the region of magnetic field as shown in the figure. Then the e.m.f. generated is:
- A. -dB/dt·πr² in loop 1 and zero in loop 2
- B. Zero in loop 1 and zero in loop 2
- C. -dB/dt·πr² in loop 1 and -dB/dt·πr² in loop 2
- D. -dB/dt·πR² in loop 1 and zero in loop 2
Show answer
Answer: A — -dB/dt·πr² in loop 1 and zero in loop 2
EMF depends only on the flux through the area actually containing the changing field (πr², not the full loop area). For loop 1, which encloses the field region, e = -πr²(dB/dt). For loop 2, which is entirely outside the field region, flux is always zero so emf = 0.
- Q41· Alternating Current
The potential differences across the resistance, capacitance and inductance are 80V, 40V and 100V respectively in an L-C-R circuit. The power factor of this circuit is:
- A. 1.0
- B. 0.4
- C. 0.5
- D. 0.8
Show answer
Answer: D — 0.8
V_net = √(VR² + (VL-VC)²) = √(80² + (100-40)²) = √(6400+3600) = √10000 = 100V. Power factor cosθ = VR/V_net = 80/100 = 0.8.
- Q42· Alternating Current
A 100Ω resistance and a capacitor of 100Ω reactance are connected in series across a 220V source. When the capacitor is 50% charged, the peak value of the displacement current is:
- A. 11√2 A
- B. 2.2 A
- C. 11 A
- D. 4.4 A
Show answer
Answer: B — 2.2 A
Z = √(R²+Xc²) = √(100²+100²) = 100√2 Ω. Irms = 220/(100√2) = 22/(10√2) A. Peak current Ipeak = √2 × 22/(10√2) = 2.2 A. The displacement current equals the conduction current in a series AC circuit, independent of charge state.
- Q43· Ray Optics and Optical Instruments
Two identical glass (μg = 3/2) equiconvex lenses of focal length f each are kept in contact. The space between the two lenses is filled with water (μw = 4/3). The focal length of the combination is:
- A. 3f/4
- B. f/3
- C. f
- D. 4f/3
Show answer
Answer: A — 3f/4
The water fills a biconcave shape between the two equiconvex lenses. Using lens maker's formula for each: 1/f1=1/f3=1/R (each glass lens), 1/f2=(4/3-1)(-2/R)=-2/(3R) (water lens, concave). Combined: 1/f=1/R-2/(3R)+1/R=4/(3R)... working through gives f_combination=3f/4.
- Q44· Ray Optics and Optical Instruments
An air bubble in a glass slab with refractive index 1.5 (near normal incidence) is 5 cm deep when viewed from one surface and 3 cm deep when viewed from the opposite face. The thickness (in cm) of the slab is:
- A. 16
- B. 8
- C. 10
- D. 12
Show answer
Answer: D — 12
Real depth from each face: d1 = 1.5×5 = 7.5 cm, d2 = 1.5×3 = 4.5 cm. Total thickness = d1+d2 = 7.5+4.5 = 12 cm.
- Q45· Wave Optics
The interference pattern is obtained with two coherent light sources of intensity ratio n. In the interference pattern, the ratio (Imax-Imin)/(Imax+Imin) will be:
- A. 2√n/(n+1)²
- B. √n/(n+1)
- C. 2√n/(n+1)
- D. √n/(n+1)²
Show answer
Answer: C — 2√n/(n+1)
Imax/Imin = [(√I1+√I2)/(√I1-√I2)]² = [(1+√n)/(1-√n)]². Then (Imax-Imin)/(Imax+Imin) = [(1+√n)²-(1-√n)²]/[(1+√n)²+(1-√n)²] = 4√n/[2(1+n)] = 2√n/(1+n).
Take NEET-style timed mocks with your rank
Full 720-mark mocks, NEET 2016 PYQs and instant analysis. Free for 30 days, no card.
Compare NEET course plans for every class.
Take NEET-style timed mocks with your rank
Full 720-mark mocks, NEET 2016 PYQs and instant analysis. Free for 30 days, no card.
Compare NEET course plans for every class.
Take NEET-style timed mocks with your rank
Full 720-mark mocks, NEET 2016 PYQs and instant analysis. Free for 30 days, no card.
Compare NEET course plans for every class.
More free practice: chapter-wise PYQs · NEET Question of the Day · Readiness Test