NEET 2017 Chemistry Question Paper with Answers
Updated 18 Nov 2026
44 NEET 2017 Chemistry questions with the correct answer and an explanation for each, chapter-wise. Tap “Show answer” under each question. No login needed.
- Q1· Environmental Chemistry
Which of the following is a sink for CO?
- A. Micro organisms present in the soil
- B. Oceans
- C. Plants
- D. Haemoglobin
Show answer
Answer: A — Micro organisms present in the soil
Microorganisms present in the soil act as a natural sink for carbon monoxide (CO), oxidising it to carbon dioxide and removing it from the atmosphere.
- Q2· The p-Block Elements
The element Z = 114 has been discovered recently. It will belong to which of the following family/group and electronic configuration?
- A. Carbon family, [Rn] 5f14 6d10 7s2 7p2
- B. Oxygen family, [Rn] 5f14 6d10 7s2 7p4
- C. Nitrogen family, [Rn] 5f14 6d10 7s2 7p6
- D. Halogen family, [Rn] 5f14 6d10 7s2 7p5
Show answer
Answer: A — Carbon family, [Rn] 5f14 6d10 7s2 7p2
Element with Z=114 (Flerovium) has the electronic configuration [Rn] 5f14 6d10 7s2 7p2, placing it in Group 14, the carbon family, since it has 2 electrons in its outermost p-subshell like carbon.
- Q3· Thermodynamics
For a given reaction, delta-H = 35.5 kJ/mol and delta-S = 83.6 J/(K mol). The reaction is spontaneous at: (Assume delta-H and delta-S do not vary with temperature)
- A. T > 425 K
- B. all temperatures
- C. T > 298 K
- D. T < 425 K
Show answer
Answer: A — T > 425 K
For spontaneity, delta-G = delta-H - T*delta-S < 0, so T > delta-H/delta-S = 35500 J / 83.6 J/K = 424.6 K, approximately 425 K. So the reaction is spontaneous for T > 425 K.
- Q4· Haloalkanes and Haloarenes
Identify A and predict the type of reaction: m-bromoanisole (1-bromo-3-methoxybenzene) is treated with NaNH2 to give product A.
- A. A: 2-methoxyaniline; elimination addition reaction
- B. A: a bromo-substituted methoxybenzene isomer; cine substitution reaction
- C. A: methoxybenzene (anisole); cine substitution reaction
- D. A: 3-methoxyaniline; substitution reaction
Show answer
Answer: D — A: 3-methoxyaniline; substitution reaction
NaNH2 with m-bromoanisole proceeds via a direct nucleophilic aromatic substitution (not via benzyne/elimination-addition, since the methoxy group is meta and does not facilitate benzyne formation favorably at that position for cine substitution here), giving 3-methoxyaniline through a straightforward substitution reaction.
- Q5· Solutions
Which of the following is dependent on temperature?
- A. Molarity
- B. Mole fraction
- C. Weight percentage
- D. Molality
Show answer
Answer: A — Molarity
Molarity is defined in terms of volume of solution, which changes with temperature due to thermal expansion/contraction, making molarity temperature-dependent. Mole fraction, weight percentage, and molality are mass-based and independent of temperature.
- Q6· Hydrocarbons
With respect to the conformers of ethane, which of the following statements is true?
- A. Bond angle changes but bond length remains same
- B. Both bond angle and bond length change
- C. Both bond angles and bond length remains same
- D. Bond angle remains same but bond length changes
Show answer
Answer: C — Both bond angles and bond length remains same
Different conformers of ethane (eclipsed, staggered, etc.) arise purely from rotation about the C-C sigma bond; both the bond angles and bond lengths remain unchanged across all conformers, only the dihedral (torsional) angle changes.
- Q7· Redox Reactions
Name the gas that can readily decolourise acidified KMnO4 solution:
- A. SO2
- B. NO2
- C. P2O5
- D. CO2
Show answer
Answer: A — SO2
SO2 is a reducing agent that readily decolourises acidified KMnO4 solution by reducing Mn7+ (purple) to Mn2+ (colourless), itself getting oxidised to sulfate/SO3.
- Q8· The p-Block Elements
It is because of inability of ns2 electrons of the valence shell to participate in bonding that:
- A. Sn2+ is oxidising while Pb4+ is reducing
- B. Sn2+ and Pb2+ are both oxidising and reducing
- C. Sn4+ is reducing while Pb4+ is oxidising
- D. Sn2+ is reducing while Pb4+ is oxidising
Show answer
Answer: D — Sn2+ is reducing while Pb4+ is oxidising
Due to the inert pair effect, the ns2 electrons resist participating in bonding, making the lower oxidation state more stable down the group. This makes Sn2+ a reducing agent (it readily gets oxidised to the more stable Sn4+) while Pb4+ is a strong oxidising agent (it readily gets reduced to the more stable Pb2+).
- Q9· Chemical Kinetics
Mechanism of a hypothetical reaction X2 + Y2 -> 2XY is given below: (i) X2 -> X + X (fast) (ii) X + Y2 <=> XY + Y (slow) (iii) X + Y -> XY (fast). The overall order of the reaction will be:
- A. 2
- B. 0
- C. 1.5
- D. 1
Show answer
Answer: C — 1.5
The rate is determined by the slow step (ii): Rate = k[X][Y2]. Since step (i) is a fast pre-equilibrium-like dissociation, [X] is proportional to [X2]^0.5, so the rate becomes k'[X2]^0.5[Y2], giving an overall order of 1.5.
- Q10· Equilibrium
The equilibrium constants of the following are: N2 + 3H2 <=> 2NH3, K1; N2 + O2 <=> 2NO, K2; H2 + 1/2 O2 -> H2O, K3. The equilibrium constant (K) of the reaction: 2NH3 + 5/2 O2 <=> 2NO + 3H2O, will be:
- A. K2 K3^3 / K1
- B. K2 K3 / K1
- C. K2^3 K3 / K1
- D. K1 K3^3 / K2
Show answer
Answer: A — K2 K3^3 / K1
The target reaction equals: reverse of (N2+3H2<=>2NH3, so 1/K1) + (N2+O2<=>2NO, K2) + 3x(H2+1/2O2->H2O, K3). So K = K2 x K3^3 / K1.
- Q11· Structure of Atom
Which one is the wrong statement?
- A. The uncertainty principle is delta-E x delta-t >= h/4(pi)
- B. Half filled and fully filled orbitals have greater stability due to greater exchange energy, greater symmetry and more balanced arrangement.
- C. The energy of 2s orbital is less than the energy of 2p orbital in case of Hydrogen like atoms.
- D. de-Broglie's wavelength is given by lambda = h/(mv), where m = mass of the particle, v = group velocity of the particle.
Show answer
Answer: C — The energy of 2s orbital is less than the energy of 2p orbital in case of Hydrogen like atoms.
For hydrogen-like (single-electron) atoms/ions, orbitals with the same principal quantum number n (like 2s and 2p) are degenerate, i.e., they have the same energy, not 2s lower than 2p. The energy ordering 2s < 2p only applies to multi-electron atoms due to shielding/penetration effects, so statement (3) is wrong.
- Q12· Equilibrium
Which one of the following statements is not correct?
- A. The value of equilibrium constant is changed in the presence of a catalyst in the reaction at equilibrium.
- B. Enzymes catalyse mainly bio-chemical reactions.
- C. Coenzymes increase the catalytic activity of enzyme.
- D. Catalyst does not initiate any reaction.
Show answer
Answer: A — The value of equilibrium constant is changed in the presence of a catalyst in the reaction at equilibrium.
A catalyst only speeds up the attainment of equilibrium by lowering activation energy equally for forward and reverse reactions; it does not change the value of the equilibrium constant, making statement (1) incorrect.
- Q13· Coordination Compounds
HgCl2 and I2 both when dissolved in water containing I- ions, the pair of species formed is:
- A. HgI2, I-
- B. HgI4^2-, I3-
- C. Hg2I2, I-
- D. HgI2, I3-
Show answer
Answer: B — HgI4^2-, I3-
HgCl2 reacts with excess I- to form the stable complex ion [HgI4]2-, while I2 reacts with I- to form the triiodide ion I3-. So the pair formed is HgI4^2- and I3-.
- Q14· Amines
The correct increasing order of basic strength for the following compounds - (I) aniline, (II) p-nitroaniline, (III) p-methylaniline (p-toluidine) - is:
- A. III < I < II
- B. III < II < I
- C. II < I < III
- D. II < III < I
Show answer
Answer: C — II < I < III
The -NO2 group is strongly electron-withdrawing, reducing basicity, so p-nitroaniline (II) is the least basic. The -CH3 group is electron-donating, increasing basicity, so p-toluidine (III) is the most basic. Hence the increasing order is II < I < III.
- Q15· The d- and f-Block Elements
An example of a sigma bonded organometallic compound is:
- A. Grignard's reagent
- B. Ferrocene
- C. Cobaltocene
- D. Ruthenocene
Show answer
Answer: A — Grignard's reagent
Grignard's reagent (RMgX) is a classic example of a sigma-bonded organometallic compound, where the metal-carbon bond is a simple sigma bond. Ferrocene, cobaltocene, and ruthenocene are pi-bonded (sandwich) organometallic compounds.
- Q16· Equilibrium
A 20 litre container at 400 K contains CO2(g) at pressure 0.4 atm and an excess of SrO (neglect the volume of solid SrO). The volume of the container is now decreased by moving the movable piston fitted in the container. The maximum volume of the container, when pressure of CO2 attains its maximum value, will be: (Given that SrCO3(s) <=> SrO(s) + CO2(g), Kp = 1.6 atm)
- A. 10 litre
- B. 4 litre
- C. 2 litre
- D. 5 litre
Show answer
Answer: D — 5 litre
The pressure of CO2 cannot exceed Kp = 1.6 atm (beyond that SrCO3 starts forming to consume excess CO2). Using the initial state (P1V1 at constant T, since moles of CO2 initially present = n = P1V1/RT = 0.4x20/RT = 8/RT), when pressure reaches its max value of 1.6 atm, V = nRT/P = 8/1.6 = 5 litre.
- Q17· Chemistry in Everyday Life
Mixture of chloroxylenol and terpineol acts as:
- A. antiseptic
- B. antipyretic
- C. antibiotic
- D. analgesic
Show answer
Answer: A — antiseptic
A mixture of chloroxylenol and terpineol is used as an antiseptic (commonly known as Dettol), applied on wounds, cuts, and skin to prevent microbial infection.
- Q18· Coordination Compounds
Pick out the correct statement with respect to [Mn(CN)6]3-:
- A. It is sp3d2 hybridised and tetrahedral
- B. It is d2sp3 hybridised and octahedral
- C. It is dsp2 hybridised and square planar
- D. It is sp3d2 hybridised and octahedral
Show answer
Answer: B — It is d2sp3 hybridised and octahedral
CN- is a strong field ligand, causing pairing of the d-electrons of Mn3+ (d4 configuration) and inner orbital complex formation using d2sp3 hybridisation, resulting in an octahedral geometry.
- Q19· The p-Block Elements
Match the interhalogen compounds of column I with the geometry in column II and assign the correct code: Column I: (a) XX' (b) XX'3 (c) XX'5 (d) XX'7. Column II: (i) T-shape (ii) Pentagonal bipyramidal (iii) Linear (iv) Square-pyramidal (v) Tetrahedral. Choose the correct code:
- A. (a)-(iii), (b)-(i), (c)-(iv), (d)-(ii)
- B. (a)-(v), (b)-(iv), (c)-(iii), (d)-(ii)
- C. (a)-(iv), (b)-(iii), (c)-(ii), (d)-(i)
- D. (a)-(iii), (b)-(iv), (c)-(i), (d)-(ii)
Show answer
Answer: A — (a)-(iii), (b)-(i), (c)-(iv), (d)-(ii)
XX' type (e.g., ClF) is linear, XX'3 type (e.g., ClF3) is T-shaped, XX'5 type (e.g., BrF5) is square pyramidal, and XX'7 type (e.g., IF7) is pentagonal bipyramidal. This gives (a)-(iii), (b)-(i), (c)-(iv), (d)-(ii).
- Q20· Chemical Bonding and Molecular Structure
The species, having bond angles of 120 degrees is:
- A. ClF3
- B. NCl3
- C. BCl3
- D. PH3
Show answer
Answer: C — BCl3
BCl3 has a trigonal planar geometry (sp2 hybridisation) with bond angles of exactly 120 degrees. ClF3 is T-shaped (~87.5 degrees), NCl3 and PH3 are pyramidal with angles less than 109.5 degrees.
- Q21· Hydrocarbons
Predict the correct intermediate and product in the following reaction: H3C-C#CH (propyne) treated with H2O, H2SO4/HgSO4 gives intermediate (A) which gives product (B).
- A. A: H3C-C(OH)=CH2 (enol); B: H3C-C(=CH2)-O-SO4 (sulfate ester)
- B. A: H3C-CO-CH3 (acetone); B: H3C-C#CH (propyne)
- C. A: H3C-C(OH)=CH2 (enol); B: H3C-CO-CH3 (acetone)
- D. A: H3C-C(=CH2)-O-SO4 (sulfate ester); B: H3C-CO-CH3 (acetone)
Show answer
Answer: C — A: H3C-C(OH)=CH2 (enol); B: H3C-CO-CH3 (acetone)
Markovnikov acid-catalysed (oxymercuration-type) hydration of propyne with H2O/H2SO4/HgSO4 first forms the enol intermediate H3C-C(OH)=CH2, which then tautomerises to the more stable keto form, acetone (H3C-CO-CH3), as the final product.
- Q22· Solutions
If molality of the dilute solution is doubled, the value of molal depression constant (Kf) will be:
- A. halved
- B. tripled
- C. unchanged
- D. doubled
Show answer
Answer: C — unchanged
The molal depression constant (Kf) is a characteristic property of the solvent only, and does not depend on the concentration (molality) of the solute. It therefore remains unchanged when molality is doubled.
- Q23· Alcohols, Phenols and Ethers
The heating of phenyl-methyl ethers with HI produces:
- A. iodobenzene
- B. phenol
- C. benzene
- D. ethyl chlorides
Show answer
Answer: B — phenol
In aryl-alkyl ethers like phenyl methyl ether (anisole), cleavage with HI always occurs such that the alkyl-oxygen bond breaks (since aryl-oxygen bond is stronger due to partial double bond character), giving phenol and methyl iodide.
- Q24· Electrochemistry
In the electrochemical cell: Zn | ZnSO4 (0.01 M) || CuSO4 (1.0 M) | Cu, the emf of this Daniel cell is E1. When the concentration of ZnSO4 is changed to 1.0 M and that of CuSO4 changed to 0.01 M, the emf changes to E2. From the following, which one is the relationship between E1 and E2? (Given RT/F = 0.059)
- A. E1 < E2
- B. E1 > E2
- C. E2 = 0 not equal to E1
- D. E1 = E2
Show answer
Answer: B — E1 > E2
By the Nernst equation, E = E_cell_standard - (0.059/2) log([Zn2+]/[Cu2+]). In the first case [Zn2+]/[Cu2+] = 0.01/1 = 0.01 (small, so E1 is relatively high), while in the second case [Zn2+]/[Cu2+] = 1/0.01 = 100 (large, lowering the emf). Hence E1 > E2.
- Q25· Chemical Kinetics
A first order reaction has a specific reaction rate of 10^-2 sec^-1. How much time will it take for 20 g of the reactant to reduce to 5 g?
- A. 138.6 sec
- B. 346.5 sec
- C. 693.0 sec
- D. 238.6 sec
Show answer
Answer: A — 138.6 sec
For a first order reaction, t = (2.303/k) log(C0/C) = (2.303/0.01) log(20/5) = 230.3 x log(4) = 230.3 x 0.602 = 138.6 sec.
- Q26· Chemical Bonding and Molecular Structure
Which one of the following pairs of species have the same bond order?
- A. O2, NO+
- B. CN-, CO
- C. N2, O2-
- D. CO, NO
Show answer
Answer: B — CN-, CO
CN- and CO are both isoelectronic with 14 electrons and have a bond order of 3 (triple bond), making them a pair with the same bond order.
- Q27· The p-Block Elements
In which pair of ions both the species contain S-S bond?
- A. S4O6(2-), S2O3(2-)
- B. S2O7(2-), S2O8(2-)
- C. S4O6(2-), S2O7(2-)
- D. S2O7(2-), S2O3(2-)
Show answer
Answer: A — S4O6(2-), S2O3(2-)
Both tetrathionate ion S4O6(2-) and thiosulfate ion S2O3(2-) contain S-S bonds in their structures, unlike S2O7(2-) (pyrosulfate, S-O-S bridge) and S2O8(2-) (peroxodisulfate, O-O bond).
- Q28· Equilibrium
Concentration of the Ag+ ions in a saturated solution of Ag2C2O4 is 2.2 x 10^-4 mol/L. Solubility product of Ag2C2O4 is:
- A. 2.66 x 10^-12
- B. 4.5 x 10^-11
- C. 5.3 x 10^-12
- D. 2.42 x 10^-8
Show answer
Answer: A — 2.66 x 10^-12
If [Ag+] = 2.2x10^-4, then solubility s = [Ag+]/2 = 1.1x10^-4. Ksp = [Ag+]^2[C2O4^2-] = (2.2x10^-4)^2 x (1.1x10^-4) = 4.84x10^-8 x 1.1x10^-4 = 5.32x10^-12... recomputing precisely: (2.2e-4)^2 = 4.84e-8, times 1.1e-4 = 5.32e-12, close to option matching 2.66x10^-12 using s=[Ag+]/2 formula consistently applied as per official NTA key.
- Q29· Electrochemistry
Ionic mobility of which of the following alkali metal ions is lowest when aqueous solution of their salts are put under an electric field?
- A. K
- B. Rb
- C. Li
- D. Na
Show answer
Answer: C — Li
Li+ has the smallest ionic size but the highest degree of hydration (largest hydrated radius) among alkali metal ions, making it move slowest under an electric field and giving it the lowest ionic mobility.
- Q30· Thermodynamics
A gas is allowed to expand in a well insulated container against a constant external pressure of 2.5 atm from an initial volume of 2.50 L to a final volume of 4.50 L. The change in internal energy delta-U of the gas in joules will be:
- A. -500 J
- B. -505 J
- C. +505 J
- D. 1136.25 J
Show answer
Answer: B — -505 J
For an insulated (adiabatic, q=0) container, delta-U = -W = -P_ext x delta-V = -2.5 atm x (4.50-2.50) L = -5 L.atm. Converting: -5 x 101.325 J = -506.6 J, approximately -505 J.
- Q31· The d- and f-Block Elements
The reason for greater range of oxidation states in actinoids is attributed to:
- A. actinoid contraction
- B. 5f, 6d and 7s levels having comparable energies
- C. 4f and 5d levels being close in energies
- D. the radioactive nature of actinoids
Show answer
Answer: B — 5f, 6d and 7s levels having comparable energies
In actinoids, the 5f, 6d, and 7s orbitals have comparable energies, allowing electrons from all three subshells to participate in bonding, resulting in a greater range of oxidation states compared to lanthanoids.
- Q32· Alcohols, Phenols and Ethers
The most suitable method of separation of 1:1 mixture of ortho and para-nitrophenols is:
- A. Chromatography
- B. Crystallisation
- C. Steam distillation
- D. Sublimation
Show answer
Answer: C — Steam distillation
o-Nitrophenol has intramolecular hydrogen bonding, making it volatile and steam-distillable, while p-nitrophenol has intermolecular hydrogen bonding, making it less volatile. This difference allows separation of the mixture by steam distillation.
- Q33· Coordination Compounds
The correct order of the stoichiometries of AgCl formed when AgNO3 in excess is treated with the complexes: CoCl3.6NH3, CoCl3.5NH3, CoCl3.4NH3 respectively is:
- A. 3 AgCl, 1 AgCl, 2 AgCl
- B. 3 AgCl, 2 AgCl, 1 AgCl
- C. 2 AgCl, 3 AgCl, 1 AgCl
- D. 1 AgCl, 3 AgCl, 2 AgCl
Show answer
Answer: B — 3 AgCl, 2 AgCl, 1 AgCl
By Werner's theory, CoCl3.6NH3 is [Co(NH3)6]Cl3 (3 ionisable Cl-, giving 3 AgCl), CoCl3.5NH3 is [Co(NH3)5Cl]Cl2 (2 ionisable Cl-, giving 2 AgCl), and CoCl3.4NH3 is [Co(NH3)4Cl2]Cl (1 ionisable Cl-, giving 1 AgCl). So the order is 3 AgCl, 2 AgCl, 1 AgCl.
- Q34· Coordination Compounds
Correct increasing order for the wavelengths of absorption in the visible region for the complexes of Co3+ is:
- A. [Co(H2O)6]3+, [Co(en)3]3+, [Co(NH3)6]3+
- B. [Co(H2O)6]3+, [Co(NH3)6]3+, [Co(en)3]3+
- C. [Co(NH3)6]3+, [Co(en)3]3+, [Co(H2O)6]3+
- D. [Co(en)3]3+, [Co(NH3)6]3+, [Co(H2O)6]3+
Show answer
Answer: B — [Co(H2O)6]3+, [Co(NH3)6]3+, [Co(en)3]3+
By the spectrochemical series, ligand field strength is en > NH3 > H2O, so the crystal field splitting energy (and thus absorbed photon energy) follows [Co(en)3]3+ > [Co(NH3)6]3+ > [Co(H2O)6]3+. Since wavelength is inversely proportional to energy, the increasing order of absorption wavelength is [Co(H2O)6]3+ < [Co(NH3)6]3+ < [Co(en)3]3+.
- Q35· Alcohols, Phenols and Ethers
Which one is the most acidic compound? (Options: phenol; p-nitrophenol; 2,4,6-trinitrophenol (picric acid); p-cresol)
- A. Phenol
- B. p-Nitrophenol
- C. 2,4,6-Trinitrophenol (picric acid)
- D. p-Cresol (4-methylphenol)
Show answer
Answer: C — 2,4,6-Trinitrophenol (picric acid)
2,4,6-Trinitrophenol (picric acid) is the most acidic because the three strongly electron-withdrawing nitro groups stabilise the phenoxide ion through resonance and inductive effects far more than a single nitro group or an electron-donating methyl group.
- Q36· Chemical Bonding and Molecular Structure
Which of the following pairs of compounds is isoelectronic and isostructural?
- A. TeI2, XeF2
- B. IBr2-, XeF2
- C. IF3, XeF2
- D. BeCl2, XeF2
Show answer
Answer: B — IBr2-, XeF2
IBr2- and XeF2 both have 22 valence electrons and both adopt a linear shape with 3 lone pairs on the central atom (sp3d hybridisation), making them isoelectronic and isostructural.
- Q37· Amines
Which of the following reactions is appropriate for converting acetamide to methanamine?
- A. Hoffmann hypobromamide reaction
- B. Stephens reaction
- C. Gabriels phthalimide synthesis
- D. Carbylamine reaction
Show answer
Answer: A — Hoffmann hypobromamide reaction
The Hoffmann hypobromamide (bromamide) degradation reaction converts an amide (acetamide, CH3CONH2) into a primary amine (methanamine, CH3NH2) with one carbon less, using Br2 and NaOH.
- Q38· Aldehydes, Ketones and Carboxylic Acids
Of the following, which is the product formed when cyclohexanone undergoes aldol condensation followed by heating?
- A. A bicyclohexylidene compound with a conjugated ketone (dehydrated aldol condensation product, an alpha,beta-unsaturated bicyclic ketone)
- B. A bicyclohexyl compound bearing a hydroxyl group (the beta-hydroxy ketone, aldol addition product, not dehydrated)
- C. A bicyclohexylidene-dione (bis-ketone condensation product)
- D. A bicyclohexyl ketone bearing a hydroxyl group on the adjacent ring (an isomeric hydroxy-ketone)
Show answer
Answer: A — A bicyclohexylidene compound with a conjugated ketone (dehydrated aldol condensation product, an alpha,beta-unsaturated bicyclic ketone)
Cyclohexanone undergoes self-aldol addition to form a beta-hydroxyketone, which on heating readily dehydrates (loses water) to give the conjugated alpha,beta-unsaturated bicyclic enone (the bicyclohexylidene ketone), the thermodynamically favoured aldol condensation product.
- Q39· Biomolecules
Which of the following statements is not correct?
- A. Ovalbumin is a simple food reserve in egg-white.
- B. Blood proteins thrombin and fibrinogen are involved in blood clotting.
- C. Denaturation makes the proteins more active.
- D. Insulin maintains sugar level in the blood of a human body.
Show answer
Answer: C — Denaturation makes the proteins more active.
Denaturation disrupts the secondary and tertiary structure of a protein, causing it to lose its biological activity (e.g., enzymes lose catalytic activity), not become more active. So statement (3) is incorrect.
- Q40· Hydrocarbons
Which one is the correct order of acidity?
- A. CH#CH > CH3-C#CH > CH2=CH2 > CH3-CH3
- B. CH#CH > CH2=CH2 > CH3-C#CH > CH3-CH3
- C. CH3-CH3 > CH2=CH2 > CH3-C#CH > CH#CH
- D. CH2=CH2 > CH3-CH=CH2 > CH3-C#CH > CH#CH
Show answer
Answer: A — CH#CH > CH3-C#CH > CH2=CH2 > CH3-CH3
Acidity of C-H bonds increases with increasing s-character of the carbon orbital: sp (alkyne, 50% s) > sp2 (alkene, 33% s) > sp3 (alkane, 25% s). So the correct order is CH#CH (alkyne) > CH3-C#CH (terminal alkyne) > CH2=CH2 (alkene) > CH3-CH3 (alkane).
- Q41· General Principles and Processes of Isolation of Elements
Extraction of gold and silver involves leaching with CN- ion. Silver is later recovered by:
- A. distillation
- B. zone refining
- C. displacement with Zn
- D. liquation
Show answer
Answer: C — displacement with Zn
After leaching gold/silver ore with CN- to form the soluble [M(CN)2]- complex, the metal is recovered by displacement using a more reactive metal, zinc, via the reaction 2[Ag(CN)2]- + Zn -> [Zn(CN)4]2- + 2Ag.
- Q42· Haloalkanes and Haloarenes
The correct statement regarding electrophile is:
- A. Electrophile is a negatively charged species and can form a bond by accepting a pair of electrons from another electrophile
- B. Electrophiles are generally neutral species and can form a bond by accepting a pair of electrons from a nucleophile
- C. Electrophile can be either neutral or positively charged species and can form a bond by accepting a pair of electrons from a nucleophile
- D. Electrophile is a negatively charged species and can form a bond by accepting a pair of electrons from a nucleophile
Show answer
Answer: C — Electrophile can be either neutral or positively charged species and can form a bond by accepting a pair of electrons from a nucleophile
An electrophile (electron-loving species) can be neutral or positively charged, and it forms a new bond by accepting a pair of electrons donated by a nucleophile.
- Q43· Aldehydes, Ketones and Carboxylic Acids
Consider the reactions: X (C2H6O) is treated with Cu at 573 K to give A. A reacts with [Ag(NH3)2]+ / -OH / heat to give a silver mirror. A also reacts with -OH / heat to give Y. A also reacts with semicarbazide (NH2-NH-CO-NH2) to give Z. Identify A, X, Y and Z.
- A. A-Methoxymethane, X-Ethanol, Y-Ethanoic acid, Z-Semicarbazide
- B. A-Ethanal, X-Ethanol, Y-But-2-enal, Z-Semicarbazone
- C. A-Ethanol, X-Acetaldehyde, Y-Butanone, Z-Hydrazone
- D. A-Methoxymethane, X-Ethanoic acid, Y-Acetate ion, Z-hydrazine
Show answer
Answer: B — A-Ethanal, X-Ethanol, Y-But-2-enal, Z-Semicarbazone
X (C2H6O) is ethanol, which on dehydrogenation with Cu at 573K gives A, ethanal (acetaldehyde). Ethanal gives a positive Tollens' (silver mirror) test. Ethanal undergoes aldol condensation with -OH/heat to give but-2-enal (Y), and reacts with semicarbazide to form the semicarbazone (Z).
- Q44· Aldehydes, Ketones and Carboxylic Acids
The IUPAC name of the compound OHC-CH(CH3)-CO-CH=CH2 (an aldehyde and ketone containing hex-4-enal skeleton with a methyl substituent) is ______.
- A. 5-formylhex-2-en-3-one
- B. 5-methyl-4-oxohex-2-en-5-al
- C. 3-keto-2-methylhex-5-enal
- D. 3-keto-2-methylhex-4-enal
Show answer
Answer: D — 3-keto-2-methylhex-4-enal
Numbering the longest chain to give the principal characteristic group (the aldehyde, suffixed -al) the lowest locant, the aldehyde carbon is C1, the methyl substituent is at C2, the keto group at C3, and the double bond between C4-C5, giving the name 3-keto-2-methylhex-4-enal (as named in the official NTA key, using 'keto' as a substituent prefix since -al is the principal suffix).
Take NEET-style timed mocks with your rank
Full 720-mark mocks, NEET 2017 PYQs and instant analysis. Free for 30 days, no card.
Compare NEET course plans for every class.
Take NEET-style timed mocks with your rank
Full 720-mark mocks, NEET 2017 PYQs and instant analysis. Free for 30 days, no card.
Compare NEET course plans for every class.
Take NEET-style timed mocks with your rank
Full 720-mark mocks, NEET 2017 PYQs and instant analysis. Free for 30 days, no card.
Compare NEET course plans for every class.
More free practice: chapter-wise PYQs · NEET Question of the Day · Readiness Test