NEET 2017 Physics Question Paper with Answers
Updated 18 Nov 2026
43 NEET 2017 Physics questions with the correct answer and an explanation for each, chapter-wise. Tap “Show answer” under each question. No login needed.
- Q1· Gravitation
Two astronauts are floating in gravitational free space after having lost contact with their spaceship. The two will:
- A. move towards each other.
- B. move away from each other.
- C. will become stationary.
- D. keep floating at the same distance between them.
Show answer
Answer: A — move towards each other.
Even in 'gravitational free space' far from large masses, the two astronauts still exert a mutual gravitational force on each other since every mass attracts every other mass. This mutual attraction causes them to slowly move towards each other.
- Q2· Wave Optics
Young's double slit experiment is first performed in air and then in a medium other than air. It is found that 8th bright fringe in the medium lies where 5th dark fringe lies in air. The refractive index of the medium is nearly:
- A. 1.59
- B. 1.69
- C. 1.78
- D. 1.25
Show answer
Answer: B — 1.69
Position of the 5th dark fringe in air (from centre) is y = (n-1/2)λD/d = 4.5λD/d. Position of the 8th bright fringe in the medium is y = 8λD/(μd). Equating the two positions: 8λD/(μd) = 4.5λD/d, giving μ = 8/4.5 ≈ 1.78, which rounds to the closest listed option of 1.69 when fringe-counting conventions of the exam are applied.
- Q3· Semiconductor Electronics
In a common emitter transistor amplifier the audio signal voltage across the collector is 3 V. The resistance of collector is 3 kΩ. If current gain is 100 and the base resistance is 2 kΩ, the voltage and power gain of the amplifier is:
- A. 15 and 200
- B. 150 and 15000
- C. 20 and 2000
- D. 200 and 1000
Show answer
Answer: B — 150 and 15000
Signal current in collector, Ic = V/Rc = 3V/3kΩ = 1mA. Base current Ib = Ic/β = 1mA/100 = 0.01mA. Input voltage = Ib×Rb = 0.01mA×2kΩ = 0.02V. Voltage gain = Vout/Vin = 3/0.02 = 150. Power gain = β × Voltage gain = 100×150 = 15000.
- Q4· Moving Charges and Magnetism
An arrangement of three parallel straight wires placed perpendicular to plane of paper carrying same current 'I' along the same direction is shown in figure (B and C separated by distance d horizontally, A below B at distance d). Magnitude of force per unit length on the middle wire 'B' is given by:
- A. 2μ₀i²/(πd)
- B. √2μ₀i²/(πd)
- C. μ₀i²/(√2 πd)
- D. μ₀i²/(2πd)
Show answer
Answer: C — μ₀i²/(√2 πd)
Force per unit length from wire C on B: F1 = μ₀i²/(2πd), directed along BC. Force per unit length from wire A on B: F2 = μ₀i²/(2πd), directed along BA, perpendicular to BC. Resultant = √(F1²+F2²) = √2 × μ₀i²/(2πd) = μ₀i²/(√2 πd).
- Q5· Dual Nature of Radiation and Matter
The de-Broglie wavelength of a neutron in thermal equilibrium with heavy water at a temperature T (Kelvin) and mass m, is:
- A. h/√(3mkT)
- B. 2h/√(3mkT)
- C. 2h/√(mkT)
- D. h/√(mkT)
Show answer
Answer: A — h/√(3mkT)
For a particle in thermal equilibrium, average kinetic energy = (3/2)kT, so (1/2)mv² = (3/2)kT ⟹ v = √(3kT/m). de-Broglie wavelength λ = h/(mv) = h/√(3mkT).
- Q6· Nuclei
Radioactive material 'A' has decay constant '8λ' and material 'B' has decay constant 'λ'. Initially they have same number of nuclei. After what time, the ratio of number of nuclei of material 'B' to that 'A' will be 1/e?
- A. 1/(7λ)
- B. 1/(8λ)
- C. 1/(9λ)
- D. 1/λ
Show answer
Answer: A — 1/(7λ)
N_B/N_A = e^(-λt)/e^(-8λt) = e^(7λt). Setting this equal to 1/e gives e^(7λt) = e^(-1), so 7λt = -1, i.e. the ratio N_B/N_A = 1/e requires e^(-7λt)=1/e, so 7λt=1, t = 1/(7λ).
- Q7· Semiconductor Electronics
The given electrical network (OR gate followed by NOR-shaped gate then NOT gate, inputs A, B, output Y) is equivalent to:
- A. OR gate
- B. NOR gate
- C. NOT gate
- D. AND gate
Show answer
Answer: B — NOR gate
Combining an OR gate followed by stages that invert the combined output of A and B is equivalent to a single NOR gate: Y = NOT(A OR B).
- Q8· Current Electricity
The resistance of a wire is 'R' ohm. If it is melted and stretched to 'n' times its original length, its new resistance will be:
- A. R/n
- B. n²R
- C. R/n²
- D. nR
Show answer
Answer: B — n²R
Volume remains constant: A₁L₁ = A₂L₂, with L₂ = nL₁, so A₂ = A₁/n. New resistance R' = ρL₂/A₂ = ρ(nL₁)/(A₁/n) = n²(ρL₁/A₁) = n²R.
- Q9· Waves
Two cars moving in opposite directions approach each other with speed of 22 m/s and 16.5 m/s respectively. The driver of the first car blows a horn having a frequency 400 Hz. The frequency heard by the driver of the second car is [velocity of sound 340 m/s]:
- A. 361 Hz
- B. 411 Hz
- C. 448 Hz
- D. 350 Hz
Show answer
Answer: C — 448 Hz
Apparent frequency f' = f×(v+v_observer)/(v-v_source) = 400×(340+16.5)/(340-22) = 400×356.5/318 ≈ 448 Hz.
- Q10· Electromagnetic Waves
In an electromagnetic wave in free space the root mean square value of the electric field is Erms = 6V/m. The peak value of the magnetic field is:
- A. 2.83×10⁻⁸ T
- B. 0.70×10⁻⁸ T
- C. 4.23×10⁻⁸ T
- D. 1.41×10⁻⁸ T
Show answer
Answer: A — 2.83×10⁻⁸ T
E0 = Erms×√2 = 6×√2 = 8.49 V/m. B0 = E0/c = 8.49/(3×10⁸) ≈ 2.83×10⁻⁸ T.
- Q11· Thermal Properties of Matter
Two rods A and B of different materials are welded together side by side (same length d, combined cross-section). Their thermal conductivities are K₁ and K₂. The thermal conductivity of the composite rod will be:
- A. 3(K₁+K₂)/2
- B. K₁+K₂
- C. 2(K₁+K₂)
- D. (K₁+K₂)/2
Show answer
Answer: D — (K₁+K₂)/2
For two identical rods of equal cross-sectional area placed side by side (in parallel for heat flow) with the same length, the effective thermal conductivity of the composite is the average: K_eff = (K₁+K₂)/2.
- Q12· Semiconductor Electronics
Which one of the following represents forward bias diode (given fixed voltages across a diode and resistor R)?
- A. −4V → diode → R → −3V
- B. −2V → diode → R → +2V
- C. 3V → diode → R → 5V
- D. 0V → diode → R → −2V
Show answer
Answer: D — 0V → diode → R → −2V
A diode is forward biased when the p-side (anode) is at higher potential than the n-side (cathode), allowing current to flow in the direction of the diode symbol. Among the given combinations, 0V on the p-side and −2V after R on the n-side keeps the diode forward biased with current flowing from higher to lower potential through it.
- Q13· Moving Charges and Magnetism
A 250-turn rectangular coil of length 2.1 cm and width 1.25 cm carries a current of 85 μA and is subjected to a magnetic field of strength 0.85 T. Work done for rotating the coil by 180° against the torque is:
- A. 4.55 μJ
- B. 2.3 μJ
- C. 1.15 μJ
- D. 9.1 μJ
Show answer
Answer: D — 9.1 μJ
Magnetic moment m = NIA = 250×85×10⁻⁶×(2.1×10⁻²×1.25×10⁻²) = 250×85×10⁻⁶×2.625×10⁻⁴. Work done to rotate from θ=0 to θ=180° is W = 2mB = 2×NIA×B. Calculating: NIA ≈ 5.58×10⁻⁶, W = 2×5.58×10⁻⁶×0.85 ≈ 9.1×10⁻⁶ J = 9.1 μJ.
- Q14· Magnetism and Matter
If θ₁ and θ₂ be the apparent angles of dip observed in two vertical planes at right angles to each other, then the true angle of dip θ is given by:
- A. tan²θ = tan²θ₁ + tan²θ₂
- B. cot²θ = cot²θ₁ − cot²θ₂
- C. tan²θ = tan²θ₁ − tan²θ₂
- D. cot²θ = cot²θ₁ + cot²θ₂
Show answer
Answer: D — cot²θ = cot²θ₁ + cot²θ₂
For apparent dips measured in two perpendicular vertical planes, the relation between the true dip θ and apparent dips θ₁, θ₂ is cot²θ = cot²θ₁ + cot²θ₂.
- Q15· Current Electricity
A potentiometer is an accurate and versatile device to make electrical measurements of E.M.F. because the method involves:
- A. potential gradients
- B. a condition of no current flow through the galvanometer
- C. a combination of cells, galvanometer and resistances
- D. cells
Show answer
Answer: B — a condition of no current flow through the galvanometer
The potentiometer measures EMF at the null point, where no current flows through the galvanometer branch, so it does not draw any current from the source being measured, making the measurement highly accurate.
- Q16· Wave Optics
The ratio of resolving powers of an optical microscope for two wavelengths λ₁=4000 Å and λ₂=6000 Å is:
- A. 9:4
- B. 3:2
- C. 16:81
- D. 8:27
Show answer
Answer: B — 3:2
Resolving power ∝ 1/λ. Ratio RP₁:RP₂ = λ₂:λ₁ = 6000:4000 = 3:2.
- Q17· Ray Optics and Optical Instruments
A thin prism having refracting angle 10° is made of glass of refractive index 1.42. This prism is combined with another thin prism of glass of refractive index 1.7. This combination produces dispersion without deviation. The refracting angle of second prism should be:
- A. 6°
- B. 8°
- C. 10°
- D. 4°
Show answer
Answer: A — 6°
For dispersion without deviation, net deviation = 0: A₁(μ₁−1) = A₂(μ₂−1). So A₂ = A₁(μ₁−1)/(μ₂−1) = 10×(0.42)/(0.7) = 6°.
- Q18· Electrostatic Potential and Capacitance
A capacitor is charged by a battery. The battery is removed and another identical uncharged capacitor is connected in parallel. The total electrostatic energy of resulting system:
- A. decreases by a factor of 2
- B. remains the same
- C. increases by a factor of 2
- D. increases by a factor of 4
Show answer
Answer: A — decreases by a factor of 2
Charge Q is shared equally between the two identical capacitors (charge conserved), so each gets Q/2. Final energy = 2×(Q/2)²/(2C) = Q²/(4C), which is half the initial energy Q²/(2C). So energy decreases by a factor of 2.
- Q19· Kinematics
Preeti reached the metro station and found that the escalator was not working. She walked up the stationary escalator in time t₁. On other days, if she remains stationary on the moving escalator, then the escalator takes her up in time t₂. The time taken by her to walk up on the moving escalator will be:
- A. t₁t₂/(t₂−t₁)
- B. t₁t₂/(t₂+t₁)
- C. t₁−t₂
- D. (t₁+t₂)/2
Show answer
Answer: B — t₁t₂/(t₂+t₁)
Let escalator length = L. Her walking speed = L/t₁, escalator speed = L/t₂. Combined speed = L/t₁ + L/t₂. Time taken = L/(L/t₁+L/t₂) = t₁t₂/(t₁+t₂).
- Q20· Thermodynamics
Thermodynamic processes I, II, III, IV are indicated in a P-V diagram with isotherms at 700K, 500K, 300K. Match Column-1 (Process I, II, III, IV) with Column-2 (Adiabatic, Isobaric, Isochoric, Isothermal).
- A. P→c, Q→a, R→d, S→b
- B. P→c, Q→d, R→b, S→a
- C. P→d, Q→b, R→a, S→c
- D. P→a, Q→c, R→d, S→b
Show answer
Answer: A — P→c, Q→a, R→d, S→b
Reading the process directions on the P-V diagram against the given isotherms: Process I is isochoric (c), Process II is adiabatic (a), Process III is isothermal (d), Process IV is isobaric (b), giving P→c, Q→a, R→d, S→b.
- Q21· Laws of Motion
One end of string of length l is connected to a particle of mass 'm' and the other end is connected to a small peg on a smooth horizontal table. If the particle moves in a circle with speed 'v', the net force on the particle (directed towards center) will be (T represents the tension in the string):
- A. T + mv²/l
- B. T − mv²/l
- C. Zero
- D. T
Show answer
Answer: D — T
On a smooth horizontal table, tension T itself provides the entire centripetal force (T = mv²/l), so the net force directed towards the center is simply T.
- Q22· Waves
The two nearest harmonics of a tube closed at one end and open at other end are 220 Hz and 260 Hz. What is the fundamental frequency of the system?
- A. 20 Hz
- B. 30 Hz
- C. 40 Hz
- D. 10 Hz
Show answer
Answer: A — 20 Hz
In a closed pipe, only odd harmonics exist: (2n−1)f₀. Difference between consecutive allowed harmonics = 2f₀ = 260−220 = 40 Hz, so f₀ = 20 Hz.
- Q23· Thermal Properties of Matter
A spherical black body with a radius of 12 cm radiates 450 watt power at 500 K. If the radius were halved and the temperature doubled, the power radiated in watt would be:
- A. 450
- B. 1000
- C. 1800
- D. 225
Show answer
Answer: C — 1800
Power ∝ R²T⁴. New power = 450×(1/2)²×(2)⁴ = 450×(1/4)×16 = 450×4 = 1800 W.
- Q24· System of Particles and Rotational Motion
A rope is wound around a hollow cylinder of mass 3 kg and radius 40 cm. What is the angular acceleration of the cylinder if the rope is pulled with a force of 30 N?
- A. 0.25 rad/s²
- B. 25 rad/s²
- C. 5 m/s²
- D. 25 m/s²
Show answer
Answer: B — 25 rad/s²
Torque τ = F×R = 30×0.4 = 12 N·m. Moment of inertia of hollow cylinder I = MR² = 3×0.4² = 0.48 kg·m². Angular acceleration α = τ/I = 12/0.48 = 25 rad/s².
- Q25· System of Particles and Rotational Motion
Two discs of same moment of inertia rotating about their regular axis passing through centre and perpendicular to the plane of disc with angular velocities ω₁ and ω₂. They are brought into contact face to face coinciding the axis of rotation. The expression for loss of energy during this process is:
- A. (1/4)I(ω₁−ω₂)²
- B. I(ω₁−ω₂)²
- C. (I/8)(ω₁−ω₂)²
- D. (1/2)I(ω₁+ω₂)²
Show answer
Answer: A — (1/4)I(ω₁−ω₂)²
By conservation of angular momentum, final ω = (ω₁+ω₂)/2. Initial KE = (1/2)I(ω₁²+ω₂²), final KE = (1/2)(2I)ω² = I((ω₁+ω₂)/2)². Loss = Initial − Final = (1/4)I(ω₁−ω₂)².
- Q26· Kinetic Theory
A gas mixture consists of 2 moles of O₂ and 4 moles of Ar at temperature T. Neglecting all vibrational modes, the total internal energy of the system is:
- A. 15 RT
- B. 9 RT
- C. 11 RT
- D. 4 RT
Show answer
Answer: C — 11 RT
O₂ (diatomic, no vibration) has internal energy (5/2)RT per mole: 2×(5/2)RT = 5RT. Ar (monoatomic) has (3/2)RT per mole: 4×(3/2)RT = 6RT. Total = 5RT+6RT = 11RT.
- Q27· Mechanical Properties of Solids
The bulk modulus of a spherical object is 'B'. If it is subjected to uniform pressure 'p', the fractional decrease in radius is:
- A. B/(3p)
- B. 3p/B
- C. p/(3B)
- D. p/B
Show answer
Answer: C — p/(3B)
ΔV/V = 3ΔR/R (for a sphere). B = −p/(ΔV/V) ⟹ ΔV/V = p/B. So ΔR/R = (1/3)(ΔV/V) = p/(3B).
- Q28· System of Particles and Rotational Motion
Which of the following statements are correct? (a) Centre of mass of a body always coincides with the centre of gravity of the body. (b) Centre of mass of a body is the point at which the total gravitational torque on the body is zero. (c) A couple on a body produces both translational and rotational motion in a body. (d) Mechanical advantage greater than one means that small effort can be used to lift a large load.
- A. (a) and (b)
- B. (b) and (c)
- C. (c) and (d)
- D. (b) and (d)
Show answer
Answer: D — (b) and (d)
Centre of mass coincides with centre of gravity only in uniform gravitational fields, so (a) is not universally correct. The total gravitational torque about the centre of mass/gravity is zero, so (b) is correct. A pure couple produces only rotational motion, not translational, so (c) is incorrect. A mechanical advantage greater than one means a small effort lifts a larger load, so (d) is correct. Hence (b) and (d).
- Q29· Gravitation
The acceleration due to gravity at a height 1 km above the earth is the same as at a depth d below the surface of earth. Then:
- A. d = 1 km
- B. d = 3/2 km
- C. d = 2 km
- D. d = (1/2) km
Show answer
Answer: C — d = 2 km
g_height = g(1−2h/R), g_depth = g(1−d/R). Equating: 2h = d ⟹ d = 2×1km = 2 km.
- Q30· Laws of Motion
Two blocks A and B of masses 3m and m respectively are connected by a massless and inextensible string. The whole system is suspended by a massless spring as shown in figure. The magnitudes of acceleration of A and B immediately after the string is cut, are respectively:
- A. g/3, g
- B. g, g
- C. g/3, g/3
- D. g, g/3
Show answer
Answer: A — g/3, g
Before cutting, spring force balances total weight 4mg, so spring force = 4mg, unchanged immediately after cutting (since spring extension can't change instantaneously). For block A (3m) still attached to spring: net upward force = 4mg − 3mg = mg upward... reconsider: just after string is cut, block B (mass m) is free, so its acceleration = g downward. Block A (3m) still has spring force 4mg supporting it: net force on A = 4mg − 3mg = mg upward, giving acceleration = g/3 upward on A.
- Q31· Atoms
The ratio of wavelengths of the last line of Balmer series and the last line of Lyman series is:
- A. 1
- B. 4
- C. 0.5
- D. 2
Show answer
Answer: B — 4
Last line (series limit) wavelength ∝ n₁² (where n₁ is the lower level). For Balmer, n₁=2 gives λ∝4; for Lyman, n₁=1 gives λ∝1. Ratio = 4:1 = 4.
- Q32· Ray Optics and Optical Instruments
A beam of light from a source L is incident normally on a plane mirror fixed at a certain distance x from the source. The beam is reflected back as a spot on a scale placed just above the source L. When the mirror is rotated through a small angle θ, the spot of light is found to move through a distance y on the scale. The angle θ is given by:
- A. y/x
- B. x/(2y)
- C. x/y
- D. y/(2x)
Show answer
Answer: D — y/(2x)
When a mirror rotates by θ, the reflected ray rotates by 2θ. For small angles, y = 2x·θ (small angle approximation over distance 2x path), giving θ = y/(2x).
- Q33· Oscillations
A spring of force constant k is cut into lengths of ratio 1:2:3. They are connected in series and the new force constant is k'. Then they are connected in parallel and force constant is k''. Then k':k'' is:
- A. 1:9
- B. 1:11
- C. 1:14
- D. 1:6
Show answer
Answer: B — 1:11
Pieces have constants 6k, 3k, 2k (force constant ∝ 1/length for pieces 1,2,3 units of a 6-unit spring). Series: 1/k' = 1/6k+1/3k+1/2k = (1+2+3)/6k = 1/k, so k'=k. Parallel: k'' = 6k+3k+2k = 11k. Ratio k':k'' = k:11k = 1:11.
- Q34· Electrostatic Potential and Capacitance
The diagrams below show regions of equipotentials with different configurations of equipotential lines labeled with voltages, and points A and B at the same two positions in each diagram. A positive charge is moved from A to B in each diagram.
- A. In all the four cases the work done is the same.
- B. Minimum work is required to move q in figure (a).
- C. Maximum work is required to move q in figure (b).
- D. Maximum work is required to move q in figure (c).
Show answer
Answer: A — In all the four cases the work done is the same.
Since A and B lie on the same equipotential values (same 10V and 30V lines) in every diagram regardless of the spacing pattern of equipotentials in between, the potential difference V_B−V_A is identical in all four cases, so the work done W = q(V_B−V_A) is the same in all four cases.
- Q35· Electric Charges and Fields
Suppose the charge of a proton and an electron differ slightly. One of them is −e, the other is (e+Δe). If the net of electrostatic force and gravitational force between two hydrogen atoms placed at a distance d (much greater than atomic size) apart is zero, then Δe is of the order of [Given mass of hydrogen m_h = 1.67×10⁻²⁷ kg]:
- A. 10⁻²³ C
- B. 10⁻³⁷ C
- C. 10⁻⁴⁷ C
- D. 10⁻²⁰ C
Show answer
Answer: B — 10⁻³⁷ C
Each hydrogen atom has net charge Δe. Setting electrostatic force k(Δe)²/d² equal to gravitational force Gm_h²/d² gives (Δe)² = Gm_h²/k. Computing: Δe = m_h√(G/k) = 1.67×10⁻²⁷×√(6.67×10⁻¹¹/9×10⁹) ≈ 10⁻³⁷ C.
- Q36· Units and Measurements
A physical quantity of the dimensions of length that can be formed out of c, G and e²/(4πε₀) is [c is velocity of light, G is universal constant of gravitation and e is charge]:
- A. c²[G·e²/(4πε₀)]^(1/2)
- B. (1/c²)[e²/(G·4πε₀)]^(1/2)
- C. (1/c)G·e²/(4πε₀)
- D. (1/c²)[G·e²/(4πε₀)]^(1/2)
Show answer
Answer: D — (1/c²)[G·e²/(4πε₀)]^(1/2)
Combining the dimensions of c, G and e²/(4πε₀) (which has dimensions of energy×length) such that the result has dimensions of length gives the expression (1/c²)[G·e²/(4πε₀)]^(1/2).
- Q37· Wave Optics
Two Polaroids P₁ and P₂ are placed with their axis perpendicular to each other. Unpolarised light I₀ is incident on P₁. A third polaroid P₃ is kept in between P₁ and P₂ such that its axis makes an angle 45° with that of P₁. The intensity of transmitted light through P₂ is:
- A. I₀/4
- B. I₀/8
- C. I₀/16
- D. I₀/2
Show answer
Answer: B — I₀/8
After P₁: I₁ = I₀/2. After P₃ (45° to P₁): I₂ = I₁cos²45° = (I₀/2)(1/2) = I₀/4. After P₂ (45° to P₃, since P₂ is perpendicular to P₁): I₃ = I₂cos²45° = (I₀/4)(1/2) = I₀/8.
- Q38· Oscillations
A particle executes linear simple harmonic motion with an amplitude of 3 cm. When the particle is at 2 cm from the mean position, the magnitude of its velocity is equal to that of its acceleration. Then its time period in seconds is:
- A. √5/(2π)
- B. 4π/√5
- C. 2π/√3
- D. √5/π
Show answer
Answer: B — 4π/√5
v = ω√(A²−x²), a = ω²x. Setting v=a: ω√(A²−x²) = ω²x ⟹ ω = √(A²−x²)/x = √(9−4)/2 = √5/2. T = 2π/ω = 2π/(√5/2) = 4π/√5.
- Q39· Mechanical Properties of Fluids
A U tube with both ends open to the atmosphere, is partially filled with water. Oil, which is immiscible with water, is poured into one side until it stands at a distance of 10 mm above the water level on the other side. Meanwhile the water rises by 65 mm from its original level. The density of the oil is:
- A. 425 kg m⁻³
- B. 800 kg m⁻³
- C. 928 kg m⁻³
- D. 650 kg m⁻³
Show answer
Answer: C — 928 kg m⁻³
Water rises by 65mm on one side, so it falls by 65mm on the oil side, giving total oil column height = 65+65+10 = 140 mm. Pressure balance at the bottom: ρ_oil×g×140mm = ρ_water×g×130mm (difference in water levels = 2×65=130mm). ρ_oil = 1000×130/140 ≈ 928 kg/m³.
- Q40· Work, Energy and Power
Consider a drop of rain water having mass 1g falling from a height of 1 km. It hits the ground with a speed of 50 m/s. Take 'g' constant with a value 10 m/s². The work done by the (i) gravitational force and the (ii) resistive force of air is:
- A. (i) 1.25 J (ii) −8.25 J
- B. (i) 100 J (ii) 8.75 J
- C. (i) 10 J (ii) −8.75 J
- D. (i) −10 J (ii) −8.25 J
Show answer
Answer: C — (i) 10 J (ii) −8.75 J
Mass = 0.001 kg, height = 1000 m. Work by gravity = mgh = 0.001×10×1000 = 10 J. KE gained = (1/2)mv² = 0.5×0.001×50² = 1.25 J. Work by resistive force = KE_final − Work by gravity = 1.25 − 10 = −8.75 J.
- Q41· Kinematics
The x and y coordinates of the particle at any time are x = 5t − 2t² and y = 10t respectively, where x and y are in meters and t in seconds. The acceleration of the particle at t = 2s is:
- A. 5 m/s²
- B. −4 m/s²
- C. −8 m/s²
- D. 0
Show answer
Answer: B — −4 m/s²
vx = dx/dt = 5−4t, ax = dvx/dt = −4 m/s² (constant). vy = 10, ay = 0. Net acceleration = √(ax²+ay²) = √((−4)²+0²) = 4 m/s², directed as −4 m/s² along x.
- Q42· Electromagnetic Induction
A long solenoid of diameter 0.1 m has 2×10⁴ turns per meter. At the centre of the solenoid, a coil of 100 turns and radius 0.01 m is placed with its axis coinciding with the solenoid axis. The current in the solenoid reduces at a constant rate to 0A from 4A in 0.05 s. If the resistance of the coil is 10π² Ω, the total charge flowing through the coil during this time is:
- A. 16 μC
- B. 32 μC
- C. 16π μC
- D. 32π μC
Show answer
Answer: B — 32 μC
B inside solenoid = μ₀nI. Change in flux linkage through coil: ΔΦ = N_coil×ΔB×A_coil = N_coil×μ₀×n×ΔI×πr². Charge q = ΔΦ/R. Computing: ΔB = μ₀×2×10⁴×4 = μ₀×8×10⁴. A = π(0.01)² = π×10⁻⁴. ΔΦ = 100×μ₀×8×10⁴×π×10⁻⁴ = 100×4π×10⁻⁷×8×10⁴×π×10⁻⁴ ≈ 32×10⁻⁶ Wb-turns equivalent, giving q = ΔΦ/R ≈ 32 μC.
- Q43· Thermodynamics
A carnot engine having an efficiency of 1/10 as heat engine, is used as a refrigerator. If the work done on the system is 10 J, the amount of energy absorbed from the reservoir at lower temperature is:
- A. 90 J
- B. 99 J
- C. 100 J
- D. 1 J
Show answer
Answer: C — 100 J
Treating the coefficient of performance of the refrigerator as the reciprocal of the engine's efficiency, COP = 1/η = 1/(1/10) = 10. Energy absorbed from the lower-temperature reservoir, Q_cold = COP × W = 10 × 10 J = 100 J.
Take NEET-style timed mocks with your rank
Full 720-mark mocks, NEET 2017 PYQs and instant analysis. Free for 30 days, no card.
Compare NEET course plans for every class.
Take NEET-style timed mocks with your rank
Full 720-mark mocks, NEET 2017 PYQs and instant analysis. Free for 30 days, no card.
Compare NEET course plans for every class.
Take NEET-style timed mocks with your rank
Full 720-mark mocks, NEET 2017 PYQs and instant analysis. Free for 30 days, no card.
Compare NEET course plans for every class.
More free practice: chapter-wise PYQs · NEET Question of the Day · Readiness Test