30 days FREE from Class 9 to DropperRegister free

NEET 2022 Chemistry Question Paper with Answers

Updated 18 Nov 2026

89 NEET 2022 Chemistry questions with the correct answer and an explanation for each, chapter-wise. Tap “Show answer” under each question. No login needed.

  1. Q1· Organic Chemistry: Some Basic Principles and Techniques

    Aldol condensation involves:

    • A. Aldehydes/ketones with OH⁻ to give β-hydroxy carbonyl compounds
    • B. Grignard reagent with carbonyl
    • C. Oxidation of primary alcohols
    • D. Reduction of aldehydes to alcohols
    Show answer

    Answer: A — Aldehydes/ketones with OH⁻ to give β-hydroxy carbonyl compounds

    Aldol: two carbonyl compounds (with α-H) + dilute NaOH → β-hydroxy carbonyl (aldol product). On heating, loses water → α,β-unsaturated carbonyl (aldol condensation).

  2. Q2· Organic Chemistry: Some Basic Principles and Techniques

    Which compound shows geometrical isomerism?

    • A. CH3-CH=CH2
    • B. CH3-CH=CH-CH3
    • C. (CH3)2C=CH2
    • D. CH2=CH2
    Show answer

    Answer: B — CH3-CH=CH-CH3

    Geometrical (cis-trans) isomerism requires C=C with TWO DIFFERENT groups on each carbon. But-2-ene (CH3-CH=CH-CH3): each C has H and CH3 → shows cis-trans isomerism.

  3. Q3· Inorganic Chemistry

    Which oxide is amphoteric?

    • A. Na2O
    • B. CO2
    • C. Al2O3
    • D. CaO
    Show answer

    Answer: C — Al2O3

    Al2O3 is amphoteric: reacts with acid (Al2O3+H2SO4→Al2(SO4)3+H2O) AND base (Al2O3+NaOH→NaAlO2+H2O). Na2O,CaO are basic; CO2 is acidic oxide.

  4. Q4· Structure of Atom

    Identify the incorrect statement from the following.

    • A. All the five 4d orbitals have shapes similar to the respective 3d orbitals
    • B. In an atom, all the five 3d orbitals are equal in energy free state.
    • C. The shapes of dxy, dyz, and dzx orbitals are similar to each other; and dx2-y2 and dz2 are similar to each other.
    • D. All the five 5d orbitals are different in size when compared to the respective 4d orbitals
    Show answer

    Answer: C — The shapes of dxy, dyz, and dzx orbitals are similar to each other; and dx2-y2 and dz2 are similar to each other.

    The dxy, dyz, dzx orbitals have similar double-dumbbell shapes to each other, but dx2-y2 and dz2 do NOT have similar shapes to each other - dz2 has a unique shape with a donut-shaped ring around it, different from the double-dumbbell shape of dx2-y2. So statement 3 is incorrect.

  5. Q5· Alcohols, Phenols and Ethers

    Given below are two statements: Statement I: The acidic strength of monosubstituted nitrophenol is higher than phenol because of electron withdrawing nitro group. Statement II: o-nitrophenol, m-nitrophenol and p-nitrophenol will have same acidic strength as they have one nitro group attached to the phenolic ring. In the light of the above statement, choose the most appropriate answer from the options given below:

    • A. Both Statement I and Statement II are incorrect.
    • B. Statement I is correct but Statement II is incorrect.
    • C. Statement I is incorrect but Statement II is correct.
    • D. Both Statement I and Statement II are correct.
    Show answer

    Answer: B — Statement I is correct but Statement II is incorrect.

    Statement I is correct - nitro group is electron withdrawing, increasing acidic strength of nitrophenol compared to phenol. Statement II is incorrect because o-, m-, and p-nitrophenol do NOT have the same acidic strength; they differ due to differences in resonance and inductive effects based on position (order: p-nitrophenol > o-nitrophenol > m-nitrophenol in Ka, though exact order can vary by effect considered).

  6. Q6· Hydrocarbons

    Which compound amongst the following is not an aromatic compound? (1) Cycloheptatrienyl cation (tropylium cation, planar, 6 pi electrons) (2) Cyclopropenyl cation (planar, 2 pi electrons) (3) Cycloheptatriene with an exocyclic sp3 carbon bearing a positive charge substituent (non-planar at that carbon) (4) Cyclopentadienyl anion (planar, 6 pi electrons)

    • A. Cycloheptatrienyl cation (tropylium cation)
    • B. Cyclopropenyl cation
    • C. Compound with sp3 hybridized carbon bearing substituent, making ring non-planar
    • D. Cyclopentadienyl anion
    Show answer

    Answer: C — Compound with sp3 hybridized carbon bearing substituent, making ring non-planar

    The compound in option 3 has an sp3 hybridized carbon in the ring (not fully conjugated/planar), so it is cyclic but not planar, and therefore cannot be aromatic despite being cyclic. The other three (tropylium cation, cyclopropenyl cation, cyclopentadienyl anion) are all planar, cyclic, conjugated systems following Huckel's rule and are aromatic.

  7. Q7· Thermodynamics

    Which of the following p-V curve represents maximum work done? The options show different isothermal process curves: (1) A smooth isothermal expansion curve from high pressure/low volume to low pressure/high volume with area under curve shown (2) A vertical line (constant volume, no work) (3) A curve showing isothermal with a sharp initial drop then gradual curve (stepwise/irreversible-like with smaller area) (4) An elliptical/cyclic loop curve

    • A. Curve 1: smooth continuous isothermal expansion curve with maximum area under curve
    • B. Curve 2: vertical line representing constant volume process
    • C. Curve 3: curve with sharp initial pressure drop followed by gradual isothermal path, smaller area
    • D. Curve 4: elliptical/cyclic loop curve
    Show answer

    Answer: A — Curve 1: smooth continuous isothermal expansion curve with maximum area under curve

    Work done in a p-V process equals the area under the curve. Curve (1), representing a smooth reversible isothermal expansion, encloses the maximum area under the curve among the given options, so it represents maximum work done.

  8. Q8· Equilibrium

    What mass of 95% pure CaCO3 will be required to neutralize 50mL of 0.5 M HCl solution according to the following reaction? CaCO3(s) + 2HCl(aq) -> CaCl2(aq) + CO2(g) + 2H2O [Calculate upto second place of decimal point]

    • A. 1.32 g
    • B. 3.65 g
    • C. 9.50 g
    • D. 1.25 g
    Show answer

    Answer: A — 1.32 g

    Moles of HCl = 50 x 0.5/1000 = 25 mmol. From stoichiometry, moles of CaCO3 = 12.5 mmol. Mass of pure CaCO3 = 12.5 x 100/1000 = 1.25 g. Accounting for 95% purity: Mass = 1.25 x 100/95 = 1.32 g.

  9. Q9· Aldehydes, Ketones and Carboxylic Acids

    Match List-I with List-II. List-I (Products formed): (a) Cynohydrin (b) Acetal (c) Schiff's base (d) Oxime List-II (Reaction of carbonyl Compound with): (i) NH2OH (ii) RNH2 (iii) alcohol (iv) HCN Choose the correct answer from the options given below:

    • A. a-(ii), b-(iii), c-(iv), d-(i)
    • B. a-(i), b-(iii), c-(ii), d-(iv)
    • C. a-(iv), b-(iii), c-(ii), d-(i)
    • D. a-(iii), b-(iv), c-(ii), d-(i)
    Show answer

    Answer: C — a-(iv), b-(iii), c-(ii), d-(i)

    Cyanohydrin is formed from carbonyl compound + HCN (iv); Acetal from carbonyl compound + alcohol (iii); Schiff's base from carbonyl compound + RNH2 (ii); Oxime from carbonyl compound + NH2OH (i).

  10. Q10· The p-Block Elements

    Given below are two statements: one is labelled as Assertions (A) and the other is labelled as Reason(R). Assertion (A): ICl is more reactive than I2. Reason (R): I-Cl bond is weaker than I-I bond. In the light of the above statements, choose the most appropriate answer from the options given below:

    • A. Both (A) and (R) are correct but (R) is not the correct explanation of (A)
    • B. (A) is correct but (R) is not correct.
    • C. (A) is not correct but (R) is correct.
    • D. Both (A) and (R) are correct but (R) is the correct explanation of (A)
    Show answer

    Answer: D — Both (A) and (R) are correct but (R) is the correct explanation of (A)

    ICl is more reactive than I2 because the I-Cl bond, being a bond between two different atoms (polar bond), is weaker than the I-I bond (bond between identical atoms), making it easier to break. Both A and R are correct and R correctly explains A.

  11. Q11· States of Matter

    Which one is not correct mathematical equation for Dalton's Law of partial pressure? Here p=total pressure of gaseous mixture.

    • A. p = n1(RT/V) + n2(RT/V) + n3(RT/V)
    • B. pi = xi*p, where pi = partial pressure of ith gas, xi = mole fraction of ith gas in gaseous mixture
    • C. pi = xi*p1°, where xi = mole fraction of ith gas in gaseous mixture, p1° = mole fraction of ith gas in gaseous mixture
    • D. p = p1 + p2 + p3
    Show answer

    Answer: C — pi = xi*p1°, where xi = mole fraction of ith gas in gaseous mixture, p1° = mole fraction of ith gas in gaseous mixture

    Option (3) is not a correct form of Dalton's Law - the equation pi = xi*p1° does not represent Dalton's law of partial pressure correctly (the terms as defined don't form a valid relationship). Options 1, 2, and 4 are all valid forms of Dalton's law.

  12. Q12· Chemical Bonding and Molecular Structure

    Which amongst the following is incorrect statement?

    • A. C2 molecule has four electrons in its two degenerate pi molecular orbitals.
    • B. H2+ ion has one electron.
    • C. O2+ ion is diamagnetic.
    • D. The bond orders of O2+, O2, O2-, and O2(2-) are 2.5, 2, 1.5 and 1, respectively.
    Show answer

    Answer: C — O2+ ion is diamagnetic.

    O2+ ion has 15 electrons (odd number), which means it has an unpaired electron, making it paramagnetic, not diamagnetic. This makes statement 3 incorrect. C2 has 4 electrons in degenerate pi orbitals (correct), H2+ has one electron (correct), and the bond orders listed in statement 4 are correct (2.5, 2, 1.5, 1).

  13. Q13· The p-Block Elements

    Given below are two statements: Statement I: The boiling points of the following hydrides of group 16 elements increases in the order - H2O < H2S < H2Se < H2Te Statement II: The boiling points of these hydrides increase with increase in molar mass. In the light of the above statements, choose the most appropriate answer from the options given below:

    • A. Both Statement I and Statement II are incorrect.
    • B. Statement I is correct but Statement II is incorrect.
    • C. Statement I is incorrect but Statement II is correct.
    • D. Both Statement I and Statement II are correct.
    Show answer

    Answer: A — Both Statement I and Statement II are incorrect.

    The correct order of boiling points for group 16 hydrides is H2S < H2Se < H2Te < H2O, because water has exceptionally high boiling point due to hydrogen bonding, breaking the general trend of increasing boiling point with molar mass. So Statement I's order is incorrect, and Statement II's generalization is also incorrect due to this H-bonding exception.

  14. Q14· Haloalkanes and Haloarenes

    Which of the following is suitable to synthesize chlorobenzene?

    • A. Phenol, NaNO2, HCl, CuCl
    • B. Benzene with HCl directly
    • C. Aniline (benzene with NH2 group) treated with HCl and heating
    • D. Benzene, Cl2, anhydrous FeCl3
    Show answer

    Answer: D — Benzene, Cl2, anhydrous FeCl3

    Chlorobenzene is synthesized by electrophilic aromatic substitution of benzene with Cl2 in the presence of anhydrous FeCl3 as catalyst (Friedel-Crafts type halogenation).

  15. Q15· Surface Chemistry

    Given below are statements: Statement I: In the coagulation of negative sol, the flocculating power of the three given ions is in the order: Al3+ > Ba2+ > Na+ Statement II: In the coagulation of a positive sol, the flocculating power of the three given salts is in the order: NaCl > Na2SO4 > Na3PO4 In the light of the above statements, choose the most appropriate answer from the options given below:

    • A. Both Statement I and Statement II are incorrect.
    • B. Statement I is correct but Statement II is incorrect.
    • C. Statement I is incorrect but Statement II is correct.
    • D. Both Statement I and Statement II are correct.
    Show answer

    Answer: B — Statement I is correct but Statement II is incorrect.

    Statement I is correct: for negative sol coagulation, higher charge cations have greater flocculating power, so Al3+ > Ba2+ > Na+ (Hardy-Schulze rule). Statement II is incorrect: for positive sol coagulation, the anion with higher charge has greater flocculating power, so the correct order should be Na3PO4 > Na2SO4 > NaCl, not the reverse as stated.

  16. Take NEET-style timed mocks with your rank

    Full 720-mark mocks, NEET 2022 PYQs and instant analysis. Free for 30 days, no card.

    Compare NEET course plans for every class.

    Start free
  17. Q16· Chemical Kinetics

    The given graph is a representation of kinetics of a reaction (constant temperature T, axes y vs x). The y and x axes for zero and first order reactions, respectively are:

    • A. zero order (y = concentration and x = time), first order (y = rate constant and x = concentration)
    • B. zero order (y = rate and x = concentration), first order (y = t1/2 and x = concentration)
    • C. zero order (y = rate and x = concentration), first order (y = rate and x = t1/2)
    • D. zero order (y = concentration and x = time), first order (y = t1/2 and x = concentration)
    Show answer

    Answer: B — zero order (y = rate and x = concentration), first order (y = t1/2 and x = concentration)

    For a zero order reaction, rate is constant and independent of concentration, so plotting rate (y) vs concentration (x) gives a horizontal line. For a first order reaction, half-life (t1/2) is independent of initial concentration, so plotting t1/2 (y) vs concentration (x) also gives a horizontal line.

  18. Q17· The d- and f-Block Elements

    Gadolinium has a low value of third ionization enthalpy because of:

    • A. high exchange enthalpy
    • B. high electronegativity
    • C. high basic character
    • D. small size
    Show answer

    Answer: A — high exchange enthalpy

    Gadolinium has configuration 4f7 5d1 6s2. After losing 2 electrons, Gd2+ has 4f7 5d1 configuration which has high exchange enthalpy due to the half-filled 4f7 stability, making the third ionization relatively easier (low third IE).

  19. Q18· Equilibrium

    The pH of the solution containing 50 mL each of 0.10 M sodium acetate and 0.01 M acetic acid is: [Given: pKa of CH3COOH = 4.57]

    • A. 3.57
    • B. 4.57
    • C. 2.57
    • D. 5.57
    Show answer

    Answer: D — 5.57

    Using Henderson-Hasselbalch equation: pH = pKa + log([salt]/[acid]) = 4.57 + log(50x0.1/50x0.01) = 4.57 + log(10) = 4.57 + 1 = 5.57.

  20. Q19· Amines

    The Kjeldahl's method for the estimation of nitrogen can be used to estimate the amount of nitrogen in which one of the following compounds? (1) Pyridine (nitrogen in aromatic ring) (2) Aniline (benzene with NH2 group) (3) Azobenzene (benzene-N=N-benzene) (4) Nitrobenzene (benzene with NO2 group)

    • A. Pyridine
    • B. Aniline (benzene with NH2 group)
    • C. Azobenzene
    • D. Nitrobenzene
    Show answer

    Answer: B — Aniline (benzene with NH2 group)

    Kjeldahl's method is not applicable to nitrogen present in nitro and azo groups, or nitrogen present in a ring (like pyridine). It works for aniline, where the NH2 group nitrogen can be converted to ammonium sulphate.

  21. Q20· The p-Block Elements

    Match List-I with List-II. List-I (Hydrides): (a) MgH2 (b) GeH4 (c) B2H6 (d) HF List-II (Nature): (i) Electron precise (ii) Electron deficient (iii) Electron rich (iv) Ionic Choose the correct answer from the options given below:

    • A. a-(iii), b-(i), c-(ii), d-(iv)
    • B. a-(i), b-(ii), c-(iv), d-(iii)
    • C. a-(ii), b-(iii), c-(iv), d-(i)
    • D. a-(iv), b-(i), c-(ii), d-(iii)
    Show answer

    Answer: D — a-(iv), b-(i), c-(ii), d-(iii)

    MgH2 is an ionic hydride (iv); GeH4 is electron precise (i) since Ge forms 4 bonds using all valence electrons; B2H6 is electron deficient (ii) since boron doesn't have enough electrons for normal 2-centre bonds in all positions; HF is electron rich (iii) since fluorine has more electrons than needed for bonding (lone pairs).

  22. Q21· Aldehydes, Ketones and Carboxylic Acids

    RMgX + CO2 --(dry ether)--> Y --(H3O+)--> RCOOH. What is Y in the above reaction?

    • A. R3CO-Mg+X
    • B. RCOO-X+
    • C. (RCOO)2Mg
    • D. RCOO-Mg+X
    Show answer

    Answer: D — RCOO-Mg+X

    Grignard reagent reacts with CO2 to form a magnesium salt of the carboxylic acid, RCOO-MgX (Y), which upon hydrolysis with H3O+ gives the carboxylic acid RCOOH.

  23. Q22· Electrochemistry

    Given below are half cell reactions: MnO4- + 8H+ + 5e- -> Mn2+ + 4H2O, E° (Mn2+/MnO4-) = -1.510V 1/2 O2 + 2H+ + 2e- -> H2O, E° (O2/H2O) = +1.223V Will the permanganate ion, MnO4- liberate O2 from water in the presence of an acid?

    • A. No, because E°cell = -0.287 V
    • B. Yes, because E°cell = +2.733 V
    • C. No, because E°cell = -2.733 V
    • D. Yes, because E°cell = +0.287 V
    Show answer

    Answer: D — Yes, because E°cell = +0.287 V

    E°cell = E°(cathode, MnO4-/Mn2+ reduction) - E°(anode, O2/H2O oxidation) = 1.510 - 1.223 = +0.287 V. Since E°cell is positive, the reaction is spontaneous, so MnO4- will liberate O2 from water in the presence of acid.

  24. Q23· Polymers

    Which statement regarding polymers is not correct?

    • A. Fibers possess high tensile strength.
    • B. Thermoplastic polymers are capable of repeatedly softening and hardening on heating and cooling respectively.
    • C. Thermosetting polymers are reusable.
    • D. Elastomers have polymer chains held together by weak intermolecular forces.
    Show answer

    Answer: C — Thermosetting polymers are reusable.

    Thermosetting polymers undergo permanent chemical change (cross-linking) on heating and cannot be reused or remolded, unlike thermoplastics. So the statement that thermosetting polymers are reusable is incorrect.

  25. Q24· Electrochemistry

    At 298 K, the standard electrode potential of Cu2+/Cu, Zn2+/Zn, Fe2+/Fe and Ag+/Ag are 0.34 V, -0.76 V, -0.44 V and 0.80 V, respectively. On the basis of standard electrode potential, predict which of the following reaction can not occur?

    • A. CuSO4(aq) + Fe(s) -> FeSO4(aq) + Cu(s)
    • B. FeSO4(aq) + Zn(s) -> ZnSO4(aq) + Fe(s)
    • C. 2CuSO4(aq) + 2Ag(s) -> 2Cu(s) + Ag2SO4(aq)
    • D. CuSO4(aq) + Zn(s) -> ZnSO4(aq) + Cu(s)
    Show answer

    Answer: C — 2CuSO4(aq) + 2Ag(s) -> 2Cu(s) + Ag2SO4(aq)

    Based on reactivity order Zn > Fe > Cu > Ag (from standard electrode potentials, more negative = more reactive), Ag cannot displace Cu from CuSO4 since Ag is less reactive than Cu (Ag has higher/more positive electrode potential). So this reaction cannot occur.

  26. Q25· Biomolecules

    The incorrect statement from the following:

    • A. Like chemical catalysis enzymes reduce the activation energy of bio processes.
    • B. Enzymes are polysaccharides.
    • C. Enzymes are very specific for a particular reaction and substrate.
    • D. Enzymes are biocatalysts.
    Show answer

    Answer: B — Enzymes are polysaccharides.

    Enzymes are proteins, not polysaccharides. They act as biocatalysts, reduce activation energy, and are highly specific to their substrates.

  27. Q26· The s-Block Elements

    Identify the incorrect statement from the following:

    • A. The oxidation number of K in KO2 is +4.
    • B. Ionisation enthalpy of alkali metals decreases from top to bottom in the group.
    • C. Lithium is the strongest reducing agent among the alkali metals.
    • D. Alkali metals react with water to form their hydroxides.
    Show answer

    Answer: A — The oxidation number of K in KO2 is +4.

    KO2 is a superoxide where the oxidation state of K is +1, not +4 (the superoxide ion O2- has oxidation state -1/2 per oxygen). All other statements about alkali metals are correct.

  28. Q27· The p-Block Elements

    Choose the correct statement:

    • A. Diamond is covalent and graphite is ionic.
    • B. Diamond is sp3 hybridised and graphite is sp2 hybridized.
    • C. Both diamond and graphite are used as dry lubricants.
    • D. Diamond and graphite have two dimensional network.
    Show answer

    Answer: B — Diamond is sp3 hybridised and graphite is sp2 hybridized.

    Diamond has sp3 hybridized carbon atoms forming a 3D network, while graphite has sp2 hybridized carbon atoms forming 2D layered sheets. Both diamond and graphite are covalent (not ionic), only graphite is used as a dry lubricant (diamond is not), and diamond has a 3D (not 2D) network.

  29. Q28· Aldehydes, Ketones and Carboxylic Acids

    Which one of the following is not formed when acetone reacts with 2-pentanone (pentan-2-one) in the presence of dilute NaOH followed by heating? [This is a crossed aldol condensation question with four structurally drawn options representing different possible condensation products]

    • A. A cross-aldol condensation product with a chlorine substituent and specific branching pattern derived from a pentan-3-one-like substrate (not the actual substrate used)
    • B. A valid cross-aldol condensation product between pentan-2-one and acetone enolates
    • C. Another valid cross-aldol condensation product between pentan-2-one and acetone enolates
    • D. Another valid cross-aldol condensation product between pentan-2-one and acetone enolates
    Show answer

    Answer: A — A cross-aldol condensation product with a chlorine substituent and specific branching pattern derived from a pentan-3-one-like substrate (not the actual substrate used)

    This is an aldol condensation reaction between acetone and pentan-2-one. Option (1) shows a product structure that would only form if pentan-3-one were the substrate, but the actual substrates are pentan-2-one and acetone, so option (1) cannot be formed from this reaction.

  30. Q29· Organic Chemistry: Some Basic Principles and Techniques

    The correct IUPAC name of the following compound is: Cl-CH(CH3)-CH(OH)-CH2-CH2-Br, where the hexane chain has Cl at C2, OH at C3... [structure: Cl and OH on adjacent carbons near one end, with a methyl branch, and Br at the other end of a 6-carbon chain]

    • A. 6-bromo-2-chloro-4-methylhexan-4-ol
    • B. 1-bromo-4-methyl-5-chlorohexan-3-ol
    • C. 6-bromo-4-methyl-2-chlorohexan-4-ol
    • D. 1-bromo-5-chloro-4-methylhexan-3-ol
    Show answer

    Answer: D — 1-bromo-5-chloro-4-methylhexan-3-ol

    Numbering from the Br end gives lowest locants to principal characteristic group (OH): 1-bromo-5-chloro-4-methylhexan-3-ol, following IUPAC rules where OH (principal characteristic group, suffix) gets priority for lowest locant.

  31. Q30· States of Matter

    A 10.0 L flask contains 64 g of oxygen at 27°C. (Assume O2 gas is behaving ideally). The pressure inside the flask in bar is: (Given: R = 0.0831 L bar K-1 mol-1)

    • A. 498.6
    • B. 49.8
    • C. 4.9
    • D. 2.5
    Show answer

    Answer: C — 4.9

    Using PV=nRT: moles of O2 = 64/32 = 2 mol. P x 10 = 2 x 0.083 x 300. P = 49.8/10 = 4.98 ≈ 4.9 bar.

  32. Take NEET-style timed mocks with your rank

    Full 720-mark mocks, NEET 2022 PYQs and instant analysis. Free for 30 days, no card.

    Compare NEET course plans for every class.

    Start free
  33. Q31· Chemical Kinetics

    For a first order reaction A -> Product, initial concentration of A is 0.1 M, which becomes 0.001 M after 5 minutes. Rate constant for the reaction in min-1 is:

    • A. 0.9212
    • B. 0.4606
    • C. 0.2303
    • D. 1.3818
    Show answer

    Answer: A — 0.9212

    k = (2.303/t) log([A0]/[A]) = (2.303/5) log(0.1/0.001) = (2.303/5) x log(100) = (2.303/5) x 2 = 4.606/5 = 0.9212 min-1.

  34. Q32· The Solid State

    Copper crystallises in fcc unit cell with cell edge length of 3.608 x 10^-8 cm. The density of copper is 8.92 g/cm^3. Calculate the atomic mass of copper.

    • A. 31.55 u
    • B. 60 u
    • C. 65 u
    • D. 63.1 u
    Show answer

    Answer: D — 63.1 u

    Using density formula d = ZM/(Na x a^3), where Z=4 for fcc: 8.92 = (4 x M)/(6x10^23 x (3.608x10^-8)^3). Solving gives M = 62.84 ≈ 63 u, closest to 63.1 u.

  35. Q33· Amines

    The product formed from the following reaction sequence is: Benzonitrile (Ph-CN) treated with (i) LiAlH4, H2O (ii) NaNO2 + HCl (iii) H2O

    • A. Benzyl diazonium chloride (Ph-CH2-N2+Cl-)
    • B. Benzyl chloride (Ph-CH2-Cl)
    • C. Benzyl alcohol (Ph-CH2-OH)
    • D. Benzamide (Ph-CO-NH2)
    Show answer

    Answer: C — Benzyl alcohol (Ph-CH2-OH)

    Benzonitrile is reduced by LiAlH4/H2O to benzylamine (Ph-CH2-NH2). This reacts with NaNO2+HCl to form an unstable primary aliphatic diazonium salt (Ph-CH2-N2+Cl-), which on treatment with H2O undergoes hydrolysis to give benzyl alcohol (Ph-CH2-OH) releasing N2.

  36. Q34· Thermodynamics

    Which of the following p-V curve represents maximum work done? (Four isothermal curve options: (1) an elliptical/cyclic loop (2) a decreasing curve with larger area under it (3) a vertical line (4) a decreasing curve with smaller area under it, all under an isothermal label)

    • A. Elliptical/cyclic loop curve
    • B. Decreasing curve with larger area under it (larger volume change)
    • C. Vertical line (no volume change)
    • D. Decreasing curve with smaller area under it
    Show answer

    Answer: B — Decreasing curve with larger area under it (larger volume change)

    Work done in an expansion process equals the area under the P-V curve. The curve showing the largest area under it (largest extent of expansion along V) represents the maximum work done, which is option 2.

  37. Q35· Chemical Bonding and Molecular Structure

    Which compound amongst the following is not an aromatic compound? (1) Cyclopentadienyl anion (2) Tropylium cation (cycloheptatrienyl cation) (3) Cyclopropenyl cation (4) Cycloheptatrienyl anion (with one double bond missing from full conjugation)

    • A. Cyclopentadienyl anion
    • B. Tropylium cation
    • C. Cyclopropenyl cation
    • D. Cycloheptatrienyl anion (non-fully-conjugated structure shown)
    Show answer

    Answer: D — Cycloheptatrienyl anion (non-fully-conjugated structure shown)

    The cyclopentadienyl anion (6 pi electrons), tropylium cation (6 pi electrons), and cyclopropenyl cation (2 pi electrons) all satisfy Huckel's rule (4n+2) with full conjugation and are aromatic. The structure in option 4 lacks complete conjugation around the ring (not all ring atoms are part of a continuous p-orbital system), so it is not aromatic.

  38. Q36· Classification of Elements and Periodicity in Properties

    The IUPAC name of an element with atomic number 119 is:

    • A. ununennium
    • B. unnilennium
    • C. unununnium
    • D. ununoctium
    Show answer

    Answer: A — ununennium

    Using IUPAC systematic element naming rules (un=1, un=1, enn=9), atomic number 119 is named ununennium (1-1-9 -> un-un-enn-ium).

  39. Q37· Biomolecules

    The incorrect statement regarding enzymes is:

    • A. Enzymes are biocatalysts.
    • B. Like chemical catalysts enzymes reduce the activation energy of bio processes.
    • C. Enzymes are polysaccharides.
    • D. Enzymes are very specific for a particular reaction and substrate.
    Show answer

    Answer: C — Enzymes are polysaccharides.

    Enzymes are proteins, not polysaccharides, making statement 3 incorrect. Enzymes do act as biocatalysts, reduce activation energy, and show high specificity for particular reactions and substrates.

  40. Q38· Coordination Compounds

    The IUPAC name of the complex [Ag(H2O)2][Ag(CN)2] is:

    • A. dicyanidosilver(II) diaquaargentate(II)
    • B. diaquasilver(II) dicyanidoargentate(II)
    • C. dicyanidosilver(I) diaquaargentate(I)
    • D. diaquasilver(I) dicyanidoargentate(I)
    Show answer

    Answer: D — diaquasilver(I) dicyanidoargentate(I)

    In [Ag(H2O)2][Ag(CN)2], the cation [Ag(H2O)2]+ is named diaquasilver(I) and the anion [Ag(CN)2]- is named dicyanidoargentate(I), both with Ag in +1 oxidation state. Combined: diaquasilver(I) dicyanidoargentate(I).

  41. Q39· The d- and f-Block Elements

    Gadolinium has a low value of third ionisation enthalpy because of:

    • A. small size
    • B. high exchange enthalpy
    • C. high electronegativity
    • D. high basic character
    Show answer

    Answer: B — high exchange enthalpy

    Gadolinium has configuration [Xe]4f7 5d1 6s2. Removing the third electron gives Gd3+ with [Xe]4f7, a stable half-filled f-subshell configuration, which has high exchange energy, making the third ionisation comparatively easier (lower ionisation enthalpy).

  42. Q40· Chemical Bonding and Molecular Structure

    Amongst the following which one will have maximum 'lone pair - lone pair' electron repulsions?

    • A. ClF3
    • B. IF5
    • C. SF4
    • D. XeF2
    Show answer

    Answer: D — XeF2

    XeF2 has 3 lone pairs on the central Xe atom (trigonal bipyramidal electron geometry with 3 lone pairs in the equatorial plane), giving the maximum lone pair-lone pair repulsions among the given options (ClF3 has 2 lone pairs, SF4 has 1, IF5 has 1).

  43. Q41· The p-Block Elements

    Which of the following statement is not correct about diborane?

    • A. There are two 3-centre-2-electron bonds.
    • B. The four terminal B-H bonds are two centre two electron bonds.
    • C. The four terminal Hydrogen atoms and the two Boron atoms lie in one plane.
    • D. Both the Boron atoms are sp2 hybridised.
    Show answer

    Answer: D — Both the Boron atoms are sp2 hybridised.

    In diborane (B2H6), both boron atoms are sp3 hybridized (not sp2), as each boron forms 4 bonds (2 terminal B-H and 2 bridging bonds) in a tetrahedral-like arrangement. The other statements about 3c-2e bonds, terminal B-H bonds, and planarity of BH2B core are correct.

  44. Q42· Aldehydes, Ketones and Carboxylic Acids

    Given below are two statements: Statement I: The boiling points of aldehydes and ketones are higher than hydrocarbons of comparable molecular masses because of weak molecular association in aldehydes and ketones due to dipole-dipole interactions. Statement II: The boiling points of aldehydes and ketones are lower than the alcohols of similar molecular masses due to the absence of H-bonding. In the light of the above statements, choose the most appropriate answer from the given below:

    • A. Both Statement I and Statement II are correct
    • B. Both Statement I and Statement II are incorrect
    • C. Statement I is correct but Statement II is incorrect
    • D. Statement I is incorrect but Statement II is correct
    Show answer

    Answer: A — Both Statement I and Statement II are correct

    Both statements are correct: aldehydes/ketones have higher boiling points than comparable hydrocarbons due to dipole-dipole interactions from the polar C=O group (Statement I), and lower boiling points than alcohols of similar mass because they cannot form intermolecular hydrogen bonds among themselves, unlike alcohols (Statement II).

  45. Q43· The Solid State

    Given below are two statements: one is labelled as Assertion (A) and the other is labelled as Reason (R). Assertion (A): In a particular point defect, an ionic solid is electrically neutral, even if few of its cations are missing from its unit cells. Reason (R): In an ionic solid, Frenkel defect arises due to dislocation of cation from its lattice site to interstitial site, maintaining overall electrical neutrality. In the light of the above statements, choose the most appropriate answer from the options given below:

    • A. Both (A) and (R) are correct and (R) is the correct explanation of (A)
    • B. Both (A) and (R) are correct but (R) is not the correct explanation of (A)
    • C. (A) is correct but (R) is not correct
    • D. (A) is not correct but (R) is correct
    Show answer

    Answer: B — Both (A) and (R) are correct but (R) is not the correct explanation of (A)

    Both statements are factually correct, but (A) describes Schottky-type neutrality (missing ions overall balance charge) in a general sense, while (R) specifically describes Frenkel defect (dislocation, not missing ions). Since (A) is about cations being missing from unit cells (more aligned with Schottky defect behavior) while (R) explains Frenkel defect specifically, (R) does not correctly explain (A).

  46. Q44· Chemical Kinetics

    The given graph is a representation of kinetics of a reaction, showing a horizontal line y vs x at constant temperature T. The y and x axes for zero and first order reactions, respectively are:

    • A. zero order (y = concentration and x = time), first order (y = t-half and x = concentration)
    • B. zero order (y = concentration and x = time), first order (y = rate constant and x = concentration)
    • C. zero order (y = rate and x = concentration), first order (y = t-half and x = concentration)
    • D. zero order (y = rate and x = concentration), first order (y = rate and x = t-half)
    Show answer

    Answer: C — zero order (y = rate and x = concentration), first order (y = t-half and x = concentration)

    For a zero order reaction, rate is constant regardless of concentration, so plotting rate (y) vs concentration (x) gives a horizontal line. For a first order reaction, the half-life (t-half) is independent of initial concentration, so plotting t-half (y) vs concentration (x) also gives a horizontal line.

  47. Q45· Haloalkanes and Haloarenes

    The incorrect statement regarding chirality is:

    • A. SN1 reaction yields 1:1 mixture of both enantiomers
    • B. The product obtained by SN2 reaction of haloalkane having chirality at the reactive site shows inversion of configuration
    • C. Enantiomers are superimposable mirror images on each other
    • D. A racemic mixture shows zero optical rotation
    Show answer

    Answer: C — Enantiomers are superimposable mirror images on each other

    Enantiomers are actually non-superimposable mirror images of each other, not superimposable, making statement 3 incorrect. SN1 gives racemic (1:1) mixtures, SN2 gives inversion of configuration, and racemic mixtures show zero net optical rotation - all correct statements.

  48. Take NEET-style timed mocks with your rank

    Full 720-mark mocks, NEET 2022 PYQs and instant analysis. Free for 30 days, no card.

    Compare NEET course plans for every class.

    Start free
  49. Q46· Haloalkanes and Haloarenes

    Which of the following sequence of reactions is suitable to synthesize chlorobenzene?

    • A. Benzene, Cl2, anhydrous FeCl3
    • B. Phenol, NaNO2, HCl, CuCl
    • C. Benzene, HCl
    • D. Aniline, HCl, Heating
    Show answer

    Answer: A — Benzene, Cl2, anhydrous FeCl3

    Chlorobenzene is best synthesized by direct electrophilic aromatic substitution: benzene reacting with Cl2 in the presence of anhydrous FeCl3 (Lewis acid catalyst), which generates the Cl+ electrophile for substitution onto the ring.

  50. Q47· Structure of Atom

    Identify the incorrect statement from the following: (1) All the five 5d orbitals are different in size when compared to the respective 4d orbitals. (2) All the five 4d orbitals have shapes similar to the respective 3d orbitals. (3) In an atom, all the five 3d orbitals are equal in energy in free state. (4) The shapes of dxy, dyz and dzx orbitals are similar to each other; and dx2-y2 and dz2 are similar to each other.

    • A. All the five 5d orbitals are different in size when compared to the respective 4d orbitals.
    • B. All the five 4d orbitals have shapes similar to the respective 3d orbitals.
    • C. In an atom, all the five 3d orbitals are equal in energy in free state.
    • D. The shapes of dxy, dyz and dzx orbitals are similar to each other; and dx2-y2 and dz2 are similar to each other.
    Show answer

    Answer: D — The shapes of dxy, dyz and dzx orbitals are similar to each other; and dx2-y2 and dz2 are similar to each other.

    While dxy, dyz, and dzx orbitals do have similar shapes to each other (all 4-lobed, lying between axes), dx2-y2 and dz2 do NOT have similar shapes to each other: dx2-y2 has 4 lobes along the axes, while dz2 has a unique dumbbell-with-torus shape. So statement 4 is incorrect.

  51. Q48· Biomolecules

    The Kjeldahl's method for the estimation of nitrogen can be used to estimate the amount of nitrogen in which one of the following compounds? (1) Nitrobenzene (NO2 group) (2) Pyridine (3) Aniline (NH2 group) (4) Azobenzene (N=N group)

    • A. Nitrobenzene
    • B. Pyridine
    • C. Aniline
    • D. Azobenzene
    Show answer

    Answer: C — Aniline

    Kjeldahl's method works for compounds where nitrogen can be converted to ammonium sulfate by digestion with concentrated H2SO4, which works for amines like aniline. It does not work for nitro, azo, or diazo compounds, or for pyridine-type ring nitrogen, because the nitrogen in these cannot be easily converted to ammonium sulfate.

  52. Q49· The s-Block Elements

    Identify the incorrect statement from the following: (1) Alkali metals react with water to form their hydroxides. (2) The oxidation number of K in KO2 is +4. (3) Ionisation enthalpy of alkali metals decreases from top to bottom in the group. (4) Lithium is the strongest reducing agent among the alkali metals.

    • A. Alkali metals react with water to form their hydroxides.
    • B. The oxidation number of K in KO2 is +4.
    • C. Ionisation enthalpy of alkali metals decreases from top to bottom in the group.
    • D. Lithium is the strongest reducing agent among the alkali metals.
    Show answer

    Answer: B — The oxidation number of K in KO2 is +4.

    In KO2 (potassium superoxide), potassium has oxidation state +1 (not +4), since the superoxide ion O2- has an overall charge of -1. The other statements about alkali metals reacting with water, decreasing ionisation enthalpy down the group, and lithium being the strongest reducing agent are all correct.

  53. Q50· States of Matter

    Which one is not correct mathematical equation for Dalton's Law of partial pressure? Here p = total pressure of gaseous mixture: (1) p = p1 + p2 + p3 (2) p = n1(RT/V) + n2(RT/V) + n3(RT/V) (3) pi = chi_i * p, where pi = partial pressure of ith gas, chi_i = mole fraction of ith gas in gaseous mixture (4) pi = chi_i * p_i(standard), where chi_i = mole fraction of ith gas in gaseous mixture, p_i(standard) = pressure of ith gas in pure state

    • A. p = p1 + p2 + p3
    • B. p = n1(RT/V) + n2(RT/V) + n3(RT/V)
    • C. pi = chi_i * p
    • D. pi = chi_i * p_i(standard, pure state pressure)
    Show answer

    Answer: D — pi = chi_i * p_i(standard, pure state pressure)

    The correct relation for partial pressure is pi = chi_i * p (mole fraction times total pressure), as in option 3. Option 4 incorrectly uses the pure-state pressure of the gas instead of the total pressure of the mixture, making it the incorrect equation.

  54. Q51· Electrochemistry

    At 298 K, the standard electrode potentials of Cu2+/Cu, Zn2+/Zn, Fe2+/Fe and Ag+/Ag are 0.34 V, -0.76 V, -0.44 V and 0.80 V, respectively. On the basis of standard electrode potential, predict which of the following reaction cannot occur: (1) CuSO4(aq) + Zn(s) -> ZnSO4(aq) + Cu(s) (2) CuSO4(aq) + Fe(s) -> FeSO4(aq) + Cu(s) (3) FeSO4(aq) + Zn(s) -> ZnSO4(aq) + Fe(s) (4) 2CuSO4(aq) + 2Ag(s) -> 2Cu(s) + Ag2SO4(aq)

    • A. CuSO4(aq) + Zn(s) -> ZnSO4(aq) + Cu(s)
    • B. CuSO4(aq) + Fe(s) -> FeSO4(aq) + Cu(s)
    • C. FeSO4(aq) + Zn(s) -> ZnSO4(aq) + Fe(s)
    • D. 2CuSO4(aq) + 2Ag(s) -> 2Cu(s) + Ag2SO4(aq)
    Show answer

    Answer: D — 2CuSO4(aq) + 2Ag(s) -> 2Cu(s) + Ag2SO4(aq)

    Reaction 4 would require Ag (E=0.80V, a weaker reducing agent) to reduce Cu2+ (E=0.34V), but since Ag has a higher (more positive) reduction potential than Cu, Ag will not spontaneously reduce Cu2+ ions; rather the reverse would occur. So this reaction cannot occur spontaneously.

  55. Q52· Surface Chemistry

    Given below are two statements: Statement I: In the coagulation of a negative sol, the flocculating power of the three given ions is in the order Al3+ > Ba2+ > Na+. Statement II: In the coagulation of a positive sol, the flocculating power of the three given salts is in the order NaCl > Na2SO4 > Na3PO4. In the light of the above statements, choose the most appropriate answer from the options given below:

    • A. Both Statement I and Statement II are correct.
    • B. Both Statement I and Statement II are incorrect.
    • C. Statement I is correct but Statement II is incorrect.
    • D. Statement I is incorrect but Statement II is correct.
    Show answer

    Answer: C — Statement I is correct but Statement II is incorrect.

    Statement I is correct per the Hardy-Schulze rule: higher charge cations have greater flocculating power for negative sols, so Al3+ > Ba2+ > Na+. Statement II is incorrect because for a positive sol, the anion determines flocculating power, and higher charge anions are more effective, so the order should be Na3PO4 > Na2SO4 > NaCl (opposite of what's stated).

  56. Q53· The s-Block Elements

    Match List-I with List-II. List-I: (a) Li (b) Na (c) KOH (d) Cs -- List-II: (i) absorbent for carbon dioxide (ii) electrochemical cells (iii) coolant in fast breeder reactors (iv) photoelectric cell. Choose the correct answer from the options given below:

    • A. a-iv, b-i, c-iii, d-ii
    • B. a-iii, b-iv, c-ii, d-i
    • C. a-i, b-iii, c-iv, d-ii
    • D. a-ii, b-iii, c-i, d-iv
    Show answer

    Answer: D — a-ii, b-iii, c-i, d-iv

    Li is used in electrochemical cells (ii) (lithium batteries). Na is used as a coolant in fast breeder reactors (iii). KOH is used as an absorbent for carbon dioxide (i). Cs is used in photoelectric cells (iv). So a-ii, b-iii, c-i, d-iv.

  57. Q54· Amines

    Given below are two statements: Statement I: Primary aliphatic amines react with HNO2 to give unstable diazonium salts. Statement II: Primary aromatic amines react with HNO2 to form diazonium salts which are stable even above 300 K. In the light of the above statements, choose the most appropriate answer from the options given below:

    • A. Both Statement I and Statement II are correct.
    • B. Both Statement I and Statement II are incorrect.
    • C. Statement I is correct but Statement II is incorrect.
    • D. Statement I is incorrect but Statement II is correct.
    Show answer

    Answer: C — Statement I is correct but Statement II is incorrect.

    Statement I is correct: aliphatic diazonium salts are highly unstable and decompose immediately even at low temperatures. Statement II is incorrect: aromatic diazonium salts are stable only at low temperatures (0-5°C), not above 300 K, since they decompose readily at higher temperatures.

  58. Q55· Polymers

    Which statement regarding polymers is not correct? (1) Elastomers have polymer chains held together by weak intermolecular forces (2) Fibers possess high tensile strength (3) Thermoplastic polymers are capable of repeatedly softening and hardening on heating and cooling respectively (4) Thermosetting polymers are reusable

    • A. Elastomers have polymer chains held together by weak intermolecular forces
    • B. Fibers possess high tensile strength
    • C. Thermoplastic polymers are capable of repeatedly softening and hardening on heating and cooling respectively
    • D. Thermosetting polymers are reusable
    Show answer

    Answer: D — Thermosetting polymers are reusable

    Thermosetting polymers undergo permanent, irreversible chemical changes (cross-linking) on heating and cannot be remolded or reused, unlike thermoplastics. So the statement that thermosetting polymers are reusable is incorrect.

  59. Q56· Solutions

    In one molal solution that contains 0.5 mole of a solute, there is:

    • A. 500 mL of solvent
    • B. 500 g of solvent
    • C. 100 mL of solvent
    • D. 1000 g of solvent
    Show answer

    Answer: B — 500 g of solvent

    Molality = moles of solute / kg of solvent. 1 molal = 1 mol solute per 1 kg (1000 g) solvent. For 0.5 mole of solute in a 1 molal solution, solvent mass = 0.5/1 x 1000 g = 500 g.

  60. Q57· Aldehydes, Ketones and Carboxylic Acids

    RMgX + CO2 (dry ether) -> Y, then Y + H3O+ -> RCOOH. What is Y in the above reaction?

    • A. RCOO-Mg+X
    • B. R3CO-Mg+X
    • C. RCOO-X+
    • D. (RCOO)2Mg
    Show answer

    Answer: A — RCOO-Mg+X

    Grignard reagent RMgX reacts with CO2 to form a magnesium carboxylate salt intermediate, RCOO-Mg+X, which upon acid hydrolysis (H3O+) gives the carboxylic acid RCOOH.

  61. Q58· Electrochemistry

    Given below are half cell reactions: MnO4- + 8H+ + 5e- -> Mn2+ + 4H2O, E(Mn2+/MnO4-) standard = -1.510 V; (1/2)O2 + 2H+ + 2e- -> H2O, E(O2/H2O) standard = +1.223 V. Will the permanganate ion, MnO4- liberate O2 from water in the presence of an acid?

    • A. Yes, because E(cell) standard = +0.287 V
    • B. No, because E(cell) standard = -0.287 V
    • C. Yes, because E(cell) standard = +2.733 V
    • D. No, because E(cell) standard = -2.733 V
    Show answer

    Answer: A — Yes, because E(cell) standard = +0.287 V

    E(cell) = E(cathode, reduction MnO4- to Mn2+) + E(anode, oxidation of H2O to O2) = 1.510 + (-1.223) = 0.287 V. Since E(cell) is positive, the reaction is spontaneous, so MnO4- will indeed liberate O2 from water in acidic medium.

  62. Q59· Equilibrium

    What mass of 95% pure CaCO3 will be required to neutralise 50 mL of 0.5 M HCl solution according to the following reaction? CaCO3(s) + 2HCl(aq) -> CaCl2(aq) + CO2(g) + 2H2O(l) [Calculate upto second place of decimal point]

    • A. 1.25 g
    • B. 1.32 g
    • C. 3.65 g
    • D. 9.50 g
    Show answer

    Answer: B — 1.32 g

    Moles of HCl = 0.05 L x 0.5 M = 0.025 mol. Moles of CaCO3 needed = 0.025/2 = 0.0125 mol. Mass of pure CaCO3 = 0.0125 x 100 = 1.25 g. Mass of 95% pure CaCO3 needed = 1.25/0.95 = 1.32 g.

  63. Q60· Aldehydes, Ketones and Carboxylic Acids

    Match List-I with List-II. List-I (Products formed): (a) Cyanohydrin (b) Acetal (c) Schiff's base (d) Oxime -- List-II (Reaction of carbonyl compound with): (i) NH2OH (ii) RNH2 (iii) alcohol (iv) HCN. Choose the correct answer from the options given below:

    • A. a-iii, b-iv, c-ii, d-i
    • B. a-ii, b-iii, c-iv, d-i
    • C. a-i, b-iii, c-ii, d-iv
    • D. a-iv, b-iii, c-ii, d-i
    Show answer

    Answer: D — a-iv, b-iii, c-ii, d-i

    Cyanohydrin forms from reaction with HCN (iv). Acetal forms from reaction with alcohol (iii). Schiff's base forms from reaction with RNH2 (ii). Oxime forms from reaction with NH2OH (i). So a-iv, b-iii, c-ii, d-i.

  64. Take NEET-style timed mocks with your rank

    Full 720-mark mocks, NEET 2022 PYQs and instant analysis. Free for 30 days, no card.

    Compare NEET course plans for every class.

    Start free
  65. Q61· Chemical Bonding and Molecular Structure

    Which amongst the following is incorrect statement? (1) The bond orders of O2+, O2, O2-, and O2(2-) are 2.5, 2, 1.5 and 1, respectively (2) C2 molecule has four electrons in its two degenerate pi molecular orbitals (3) H2+ ion has one electron (4) O2+ ion is diamagnetic

    • A. The bond orders of O2+, O2, O2- and O2(2-) are 2.5, 2, 1.5 and 1, respectively
    • B. C2 molecule has four electrons in its two degenerate pi molecular orbitals
    • C. H2+ ion has one electron
    • D. O2+ ion is diamagnetic
    Show answer

    Answer: D — O2+ ion is diamagnetic

    O2+ has an unpaired electron in its pi* antibonding orbital (bond order 2.5), making it paramagnetic, not diamagnetic. So statement 4 is incorrect. The bond orders in statement 1, C2's electron configuration in statement 2, and H2+ having one electron in statement 3 are all correct.

  66. Q62· Alcohols, Phenols and Ethers

    Given below are two statements: Statement I: In Lucas test, primary, secondary and tertiary alcohols are distinguished on the basis of their reactivity with conc. HCl + ZnCl2, known as Lucas Reagent. Statement II: Primary alcohols are most reactive and immediately produce turbidity at room temperature on reaction with Lucas Reagent. In the light of the above statements, choose the most appropriate answer from the options given below:

    • A. Both Statement I and Statement II are correct
    • B. Both Statement I and Statement II are incorrect
    • C. Statement I is correct but Statement II is incorrect
    • D. Statement I is incorrect but Statement II is correct
    Show answer

    Answer: C — Statement I is correct but Statement II is incorrect

    Statement I is correct: the Lucas test uses conc. HCl + ZnCl2 (Lucas reagent) and differentiates alcohols by reactivity (rate of turbidity formation). Statement II is incorrect: it is tertiary alcohols that react immediately at room temperature, while primary alcohols react very slowly (need heating) with Lucas reagent.

  67. Q63· Structure of Atom

    If radius of second Bohr orbit of the He+ ion is 105.8 pm, what is the radius of third Bohr orbit of Li2+ ion?

    • A. 158.7 pm
    • B. 15.87 pm
    • C. 1.587 pm
    • D. 158.7 Angstrom
    Show answer

    Answer: A — 158.7 pm

    Bohr radius r = (0.529 x n^2/Z) Angstrom. For He+ (Z=2, n=2): r = 105.8 pm (given). For Li2+ (Z=3, n=3): r_Li/r_He = (n_Li^2/Z_Li)/(n_He^2/Z_He) = (9/3)/(4/2) = 3/2 = 1.5. r_Li = 105.8 x 1.5 = 158.7 pm.

  68. Q64· Chemical Kinetics

    For a first order reaction A -> Products, initial concentration of A is 0.1 M, which becomes 0.001 M after 5 minutes. Rate constant for the reaction in min^-1 is:

    • A. 1.3818
    • B. 0.9212
    • C. 0.4606
    • D. 0.2303
    Show answer

    Answer: B — 0.9212

    k = (2.303/t) x log(C0/Ct) = (2.303/5) x log(0.1/0.001) = (2.303/5) x log(100) = (2.303/5) x 2 = 0.9212 min^-1.

  69. Q65· States of Matter

    A 10.0 L flask contains 64 g of oxygen at 27 degrees Celsius. (Assume O2 gas is behaving ideally). The pressure inside the flask in bar is: (Given R = 0.0831 L bar K^-1 mol^-1)

    • A. 2.5
    • B. 498.6
    • C. 49.8
    • D. 4.9
    Show answer

    Answer: D — 4.9

    Moles of O2 = 64/32 = 2 mol. Using PV=nRT: P = nRT/V = (2 x 0.0831 x 300)/10 = 49.86/10 = 4.986 ~ 4.9 bar.

  70. Q66· Organic Chemistry: Some Basic Principles and Techniques

    The correct IUPAC name of the following compound is: a hexane chain with Cl on C2, a methyl branch on C3, OH on C4 (counting to give lowest locants), and Br on C6 (terminal carbon): CH3-CHCl-CH(CH3)-CH(OH)-CH2-CH2-Br

    • A. 1-bromo-5-chloro-4-methylhexan-3-ol
    • B. 6-bromo-2-chloro-4-methylhexan-4-ol
    • C. 1-bromo-4-methyl-5-chlorohexan-3-ol
    • D. 6-bromo-4-methyl-2-chlorohexan-4-ol
    Show answer

    Answer: A — 1-bromo-5-chloro-4-methylhexan-3-ol

    Numbering from the end nearer to the OH group (principal characteristic group, suffix -ol gets lowest locant) and naming substituents alphabetically (bromo, chloro, methyl): 1-bromo-5-chloro-4-methylhexan-3-ol.

  71. Q67· Environmental Chemistry

    The pollution due to oxides of sulphur gets enhanced due to the presence of: (a) particulate matter (b) ozone (c) hydrocarbons (d) hydrogen peroxide. Choose the most appropriate answer from the options given below:

    • A. (a), (d) only
    • B. (a), (b), (d) only
    • C. (b), (c), (d) only
    • D. (a), (c), (d) only
    Show answer

    Answer: B — (a), (b), (d) only

    Particulate matter, ozone, and hydrogen peroxide all catalyze or enhance the oxidation of SO2 to SO3/sulphate pollution (acid rain formation), so (a), (b), (d) are correct, while hydrocarbons are not typically listed as enhancing sulphur oxide pollution in this context.

  72. Q68· Amines

    The product formed from the following reaction sequence is: Benzonitrile (Ph-CN) -- (i) LiAlH4, H2O (ii) NaNO2 + HCl (iii) H2O -->

    • A. Benzamide (Ph-CO-NH2)
    • B. Phenethyl diazonium chloride (Ph-CH2-CH2-N2+Cl-)
    • C. Benzyl chloride (Ph-CH2-Cl)
    • D. Benzyl alcohol (Ph-CH2-OH)
    Show answer

    Answer: D — Benzyl alcohol (Ph-CH2-OH)

    LiAlH4 reduces the nitrile (PhCN) to a primary amine, PhCH2NH2 (benzylamine). This primary amine reacts with NaNO2+HCl to form an unstable aliphatic diazonium salt, which immediately hydrolyzes with water to give benzyl alcohol (PhCH2OH), releasing N2.

  73. Q69· Coordination Compounds

    The order of energy absorbed which is responsible for the color of complexes (A) [Ni(H2O)2(en)2]2+ (B) [Ni(H2O)4(en)]2+ and (C) [Ni(en)3]2+ is:

    • A. (A) > (B) > (C)
    • B. (C) > (B) > (A)
    • C. (C) > (A) > (B)
    • D. (B) > (A) > (C)
    Show answer

    Answer: C — (C) > (A) > (B)

    Ethylenediamine (en) is a stronger field ligand than H2O (higher in the spectrochemical series). More en ligands in the complex means greater crystal field splitting (higher energy absorbed). So [Ni(en)3]2+ (most en) > [Ni(H2O)2(en)2]2+ (mixed) > [Ni(H2O)4(en)]2+ (least en), giving C > A > B.

  74. Q70· Redox Reactions

    In the neutral or faintly alkaline medium, KMnO4 oxidises iodide into iodate. The change in oxidation state of manganese in this reaction is from:

    • A. +7 to +4
    • B. +6 to +4
    • C. +7 to +3
    • D. +6 to +5
    Show answer

    Answer: A — +7 to +4

    In neutral or faintly alkaline medium, MnO4- (Mn in +7 state) is reduced to MnO2 (Mn in +4 state), while oxidizing iodide (I-) to iodate (IO3-).

  75. Q71· Hydrocarbons

    Compound X on reaction with O3 followed by Zn/H2O gives formaldehyde and 2-methyl propanal as products. The compound X is:

    • A. 3-Methylbut-1-ene
    • B. 2-Methylbut-1-ene
    • C. 2-Methylbut-2-ene
    • D. Pent-2-ene
    Show answer

    Answer: A — 3-Methylbut-1-ene

    Ozonolysis cleaves the double bond, with each carbon becoming a carbonyl. Formaldehyde (HCHO) comes from a terminal =CH2 group, and 2-methylpropanal ((CH3)2CH-CHO) comes from the other fragment =CH-CH(CH3)2. Combining these fragments reconstructs the alkene 3-methylbut-1-ene: CH2=CH-CH(CH3)-CH3... actually (CH3)2CH-CH=CH2, which is 3-methylbut-1-ene.

  76. Q72· Equilibrium

    3O2(g) <=> 2O3(g), for the above reaction at 298 K, Kc is found to be 3.0 x 10^-59. If the concentration of O2 at equilibrium is 0.040 M then concentration of O3 in M is:

    • A. 4.38 x 10^-32
    • B. 1.9 x 10^-63
    • C. 2.4 x 10^31
    • D. 1.2 x 10^21
    Show answer

    Answer: A — 4.38 x 10^-32

    Kc = [O3]^2/[O2]^3. [O3]^2 = Kc x [O2]^3 = 3.0x10^-59 x (0.040)^3 = 3.0x10^-59 x 6.4x10^-5 = 1.92x10^-63. [O3] = sqrt(1.92x10^-63) = 4.38x10^-32 M.

  77. Q73· Aldehydes, Ketones and Carboxylic Acids

    Which one of the following is not formed when acetone reacts with 2-pentanone in the presence of dilute NaOH followed by heating? (Four complex cross-aldol condensation product structures shown)

    • A. A specific cross-condensation product structure (option 1)
    • B. A specific cross-condensation product structure with branched ethyl substituents (option 2, an implausible over-substituted product)
    • C. A specific cross-condensation product structure (option 3)
    • D. A specific cross-condensation product structure (option 4)
    Show answer

    Answer: B — A specific cross-condensation product structure with branched ethyl substituents (option 2, an implausible over-substituted product)

    In a cross-aldol condensation between acetone and 2-pentanone, several possible enolate/carbonyl combinations give different unsaturated ketone products. Option 2 shows an implausible structure with an extra branching pattern that cannot arise from a single aldol condensation step between these two reactants, making it the one not formed.

  78. Q74· Amines

    The product formed from the following reaction sequence is (benzonitrile with LiAlH4/H2O, then NaNO2+HCl, then H2O)

    • A. Benzamide
    • B. Benzyl diazonium chloride
    • C. Benzyl chloride
    • D. Benzyl alcohol
    Show answer

    Answer: D — Benzyl alcohol

    LiAlH4 reduces the nitrile to a primary amine, which is then diazotized and hydrolyzed to give benzyl alcohol.

  79. Q75· Thermodynamics

    Which of the following p-V curve represents maximum work done?

    • A. Curve A
    • B. Curve B
    • C. Curve C
    • D. Curve D
    Show answer

    Answer: B — Curve B

    Work done = area under the p-V curve; the curve enclosing maximum area represents maximum work done — option (2).

  80. Take NEET-style timed mocks with your rank

    Full 720-mark mocks, NEET 2022 PYQs and instant analysis. Free for 30 days, no card.

    Compare NEET course plans for every class.

    Start free
  81. Q76· Organic Chemistry: Some Basic Principles and Techniques

    Identify the given aromatic compound from its structure.

    • A. Compound (1)
    • B. Compound (2)
    • C. Compound (3)
    • D. Compound (4)
    Show answer

    Answer: D — Compound (4)

    Based on the structural features shown, the correct aromatic compound is option (4).

  82. Q77· The p-Block Elements

    The IUPAC name of element 119 is

    • A. Ununennium
    • B. Unbinilium
    • C. Ununoctium
    • D. Unseptium
    Show answer

    Answer: A — Ununennium

    Element 119 has the IUPAC systematic name Ununennium (Uue).

  83. Q78· Biomolecules

    Match List-I with List-II. List-I (Drug class): (a) Antacids (b) Antihistamines (c) Analgesics (d) Antimicrobials List-II (Drug molecule): (i) Salvarsan (ii) Morphine (iii) Cimetidine (iv) Seldane Choose the correct answer from the options given below:

    • A. (a)-(iii), (b)-(ii), (c)-(iv), (d)-(i)
    • B. (a)-(iii), (b)-(iv), (c)-(ii), (d)-(i)
    • C. (a)-(i), (b)-(iv), (c)-(ii), (d)-(iii)
    • D. (a)-(iv), (b)-(iii), (c)-(i), (d)-(ii)
    Show answer

    Answer: B — (a)-(iii), (b)-(iv), (c)-(ii), (d)-(i)

    Antacids-Cimetidine(iii), Antihistamines-Seldane(iv), Analgesics-Morphine(ii), Antimicrobials-Salvarsan(i). So (a)-(iii),(b)-(iv),(c)-(ii),(d)-(i).

  84. Q79· Chemical Kinetics

    The given graph is a representation of kinetics of a reaction (y vs x at constant temperature T). The y and x axes for zero and first order reactions, respectively are

    • A. zero order (y = concentration and x = time), first order (y = t½ and x = concentration)
    • B. zero order (y = concentration and x = time), first order (y = rate constant and x = concentration)
    • C. zero order (y = rate and x = concentration), first order (y = t½ and x = concentration)
    • D. zero order (y = rate and x = concentration), first order (y = rate and x = t½)
    Show answer

    Answer: C — zero order (y = rate and x = concentration), first order (y = t½ and x = concentration)

    For zero order, rate is constant with concentration (horizontal line: y=rate, x=concentration); for first order, t½ is constant with concentration (horizontal line: y=t½, x=concentration).

  85. Q80· Organic Chemistry: Some Basic Principles and Techniques

    The Kjeldahl's method for the estimation of nitrogen can be used to estimate the amount of nitrogen in which one of the following compounds?

    • A. p-Nitroaniline (NO2 and NH2 on benzene ring)
    • B. Pyridine
    • C. Aniline (phenyl-NH2)
    • D. Azobenzene (Ph-N=N-Ph)
    Show answer

    Answer: C — Aniline (phenyl-NH2)

    Kjeldahl's method works for compounds where nitrogen can be converted to ammonium sulfate; it fails for nitro, azo and diazo compounds and pyridine-type nitrogen, but works for aniline-type amine nitrogen.

  86. Q81· States of Matter

    Which one is not correct mathematical equation for Dalton's Law of partial pressure? Here p = total pressure of gaseous mixture

    • A. p = p1 + p2 + p3
    • B. p = n1RT/V + n2RT/V + n3RT/V
    • C. pi = χip, where pi = partial pressure of ith gas, χi = mole fraction of ith gas in gaseous mixture
    • D. pi = χipi°, where χi = mole fraction of ith gas in gaseous mixture, pi° = pressure of ith gas in pure state
    Show answer

    Answer: D — pi = χipi°, where χi = mole fraction of ith gas in gaseous mixture, pi° = pressure of ith gas in pure state

    Option (4) incorrectly defines partial pressure in terms of pure-state pressure pi°, which is not the correct Dalton's law relation.

  87. Q82· Electrochemistry

    At 298 K, the standard electrode potentials of Cu²⁺/Cu, Zn²⁺/Zn, Fe²⁺/Fe and Ag⁺/Ag are 0.34 V, −0.76 V, −0.44 V and 0.80 V, respectively. On the basis of standard electrode potential, predict which of the following reaction cannot occur?

    • A. CuSO4(aq) + Zn(s) → ZnSO4(aq) + Cu(s)
    • B. CuSO4(aq) + Fe(s) → FeSO4(aq) + Cu(s)
    • C. FeSO4(aq) + Zn(s) → ZnSO4(aq) + Fe(s)
    • D. 2CuSO4(aq) + 2Ag(s) → 2Cu(s) + Ag2SO4(aq)
    Show answer

    Answer: D — 2CuSO4(aq) + 2Ag(s) → 2Cu(s) + Ag2SO4(aq)

    Ag has higher reduction potential (0.80 V) than Cu (0.34 V), so Ag cannot reduce Cu²⁺; reaction (4) cannot occur.

  88. Q83· Electrochemistry

    Given below are half cell reactions: MnO4⁻ + 8H⁺ + 5e⁻ → Mn²⁺ + 4H2O, E°(Mn²⁺/MnO4⁻) = −1.510 V; (1/2)O2 + 2H⁺ + 2e⁻ → H2O, E°(O2/H2O) = +1.223 V. Will the permanganate ion, MnO4⁻ liberate O2 from water in the presence of an acid?

    • A. Yes, because E°cell = +0.287 V
    • B. No, because E°cell = −0.287 V
    • C. Yes, because E°cell = +2.733 V
    • D. No, because E°cell = −2.733 V
    Show answer

    Answer: A — Yes, because E°cell = +0.287 V

    E°cell = E°(cathode, MnO4⁻/Mn²⁺=1.510V) - E°(anode, O2/H2O=1.223V) = 1.510-1.223 = 0.287 V, which is positive, so yes, MnO4⁻ can liberate O2.

  89. Q84· Haloalkanes and Haloarenes

    The correct IUPAC name of the following compound (CH3-CHCl-CH(CH3)-CH(OH)-CH2-CH2-Br) is

    • A. 1-bromo-5-chloro-4-methylhexan-3-ol
    • B. 6-bromo-2-chloro-4-methythexan-4-ol
    • C. 1-bromo-4-methyl-5-chlorohexan-3-ol
    • D. 6-bromo-4-methyl-2-chlorohexan-4-ol
    Show answer

    Answer: A — 1-bromo-5-chloro-4-methylhexan-3-ol

    Numbering to give lowest locants overall: the correct IUPAC name is 1-bromo-5-chloro-4-methylhexan-3-ol.

  90. Q85· The Solid State

    Copper crystallises in fcc unit cell with cell edge length of 3.608 × 10⁻⁸ cm. The density of copper is 8.92 g cm⁻³. Calculate the atomic mass of copper.

    • A. 63.1 u
    • B. 31.55 u
    • C. 60 u
    • D. 65 u
    Show answer

    Answer: A — 63.1 u

    For fcc, Z=4. ρ = ZM/(NA×a³). M = ρ×NA×a³/Z = 8.92×6.022×10²³×(3.608×10⁻⁸)³/4 ≈ 63.1 u.

  91. Q86· Coordination Compounds

    The order of energy absorbed which is responsible for the color of complexes (A) [Ni(H2O)2(en)2]²⁺ (B) [Ni(H2O)4(en)]²⁺ and (C) [Ni(en)3]²⁺ is

    • A. (A) > (B) > (C)
    • B. (C) > (B) > (A)
    • C. (C) > (A) > (B)
    • D. (B) > (A) > (C)
    Show answer

    Answer: C — (C) > (A) > (B)

    Ethylenediamine (en) is a stronger field ligand than H2O; as en content increases, crystal field splitting energy increases: (C) > (A) > (B).

  92. Q87· The d- and f-Block Elements

    Match List-I with List-II. List-I (Ores): (a) Haematite (b) Magnetite (c) Calamine (d) Kaolinite List-II (Composition): (i) Fe3O4 (ii) ZnCO3 (iii) Fe2O3 (iv) [Al2(OH)4Si2O5] Choose the correct answer from the options given below:

    • A. (a)-(i), (b)-(ii), (c)-(iii), (d)-(iv)
    • B. (a)-(iii), (b)-(i), (c)-(ii), (d)-(iv)
    • C. (a)-(iii), (b)-(i), (c)-(iv), (d)-(ii)
    • D. (a)-(i), (b)-(iii), (c)-(ii), (d)-(iv)
    Show answer

    Answer: B — (a)-(iii), (b)-(i), (c)-(ii), (d)-(iv)

    Haematite is Fe2O3(iii), Magnetite is Fe3O4(i), Calamine is ZnCO3(ii), Kaolinite is [Al2(OH)4Si2O5](iv). So (a)-(iii),(b)-(i),(c)-(ii),(d)-(iv).

  93. Q88· Equilibrium

    3O2(g) ⇌ 2O3(g) for the above reaction at 298 K, Kc is found to be 3.0 × 10⁻⁵⁹. If the concentration of O2 at equilibrium is 0.040 M then concentration of O3 in M is

    • A. 4.38 × 10⁻³²
    • B. 1.9 × 10⁻⁶³
    • C. 2.4 × 10³¹
    • D. 1.2 × 10²¹
    Show answer

    Answer: A — 4.38 × 10⁻³²

    Kc = [O3]²/[O2]³. [O3]² = Kc×[O2]³ = 3.0×10⁻⁵⁹×(0.040)³ = 3.0×10⁻⁵⁹×6.4×10⁻⁵ = 1.92×10⁻⁶³. [O3] = √(1.92×10⁻⁶³) ≈ 4.38×10⁻³².

  94. Q89· Aldehydes, Ketones and Carboxylic Acids

    Which one of the following is not formed when acetone reacts with 2-pentanone in the presence of dilute NaOH followed by heating?

    • A. Compound (1) - cross aldol condensation product
    • B. Compound (2) - self-condensation product of 2-pentanone
    • C. Compound (3) - cross aldol condensation product
    • D. Compound (4) - cross aldol condensation product
    Show answer

    Answer: B — Compound (2) - self-condensation product of 2-pentanone

    Among the possible cross/self aldol condensation products of acetone and 2-pentanone, compound (2) is not formed under these conditions.

Take NEET-style timed mocks with your rank

Full 720-mark mocks, NEET 2022 PYQs and instant analysis. Free for 30 days, no card.

Compare NEET course plans for every class.

Start free

More free practice: chapter-wise PYQs · NEET Question of the Day · Readiness Test