NEET 2022 Physics Question Paper with Answers
Updated 18 Nov 2026
95 NEET 2022 Physics questions with the correct answer and an explanation for each, chapter-wise. Tap “Show answer” under each question. No login needed.
- Q1· Modern Physics
Work function 4.2eV. Threshold frequency (h=6.6×10⁻³⁴ J.s) is approximately:
- A. 1.01×10¹⁵ Hz
- B. 2.01×10¹⁵ Hz
- C. 0.5×10¹⁵ Hz
- D. 3×10¹⁵ Hz
Show answer
Answer: A — 1.01×10¹⁵ Hz
ν₀=W/h=(4.2×1.6×10⁻¹⁹)/(6.6×10⁻³⁴)=6.72×10⁻¹⁹/6.6×10⁻³⁴≈1.018×10¹⁵Hz≈1.01×10¹⁵Hz
- Q2· Optics
Critical angle for glass-air (μ=√2) is:
- A. 30°
- B. 45°
- C. 60°
- D. 90°
Show answer
Answer: B — 45°
sinC=1/μ=1/√2. C=sin⁻¹(1/√2)=45°. TIR occurs when light travels from denser to rarer medium at angle > critical angle. Basis of optical fibres.
- Q3· Magnetism and Matter
Proton moving with velocity v ⊥ to field B. Radius of circular path is:
- A. r=mv/qB
- B. r=qB/mv
- C. r=mv/B
- D. r=qBv/m
Show answer
Answer: A — r=mv/qB
Centripetal=magnetic force: mv²/r=qvB. r=mv/qB. Larger mass, velocity → larger radius. Larger charge, field → smaller radius.
- Q4· Atoms
Let T₁ and T₂ be the energy of an electron in the first and second excited states of hydrogen atom, respectively. According to the Bohr's model of an atom, the ratio T₁ : T₂ is:
- A. 4 : 1
- B. 4 : 9
- C. 9 : 4
- D. 1 : 4
Show answer
Answer: C — 9 : 4
First excited state: n=2, T₁ = -13.6×z²/n² = -13.6/4 eV. Second excited state: n=3, T₂ = -13.6/9 eV. T₁:T₂ = (1/4):(1/9) = 9:4.
- Q5· Semiconductor Electronics
Three circuits (a), (b) and (c) each have two p-n junction diodes connected in series with a battery, with different orientations of P and N regions in each diode (as shown in the figure). In the given circuits (a), (b) and (c), the potential drop across the two p-n junctions are equal in:
- A. Circuit (b) only
- B. Circuit (c) only
- C. Both circuits (a) and (c)
- D. Circuit (a) only
Show answer
Answer: C — Both circuits (a) and (c)
In circuits (a) and (c), both p-n junctions are in the same biasing condition (both forward or both reverse biased relative to the battery), so they offer equal resistances. Since they are in series, equal potential drops across each junction.
- Q6· Dual Nature of Radiation and Matter
When two monochromatic lights of frequency ν and ν/2 are incident on a photoelectric metal, their stopping potential becomes Vs/2 and Vs respectively. The threshold frequency for this metal is:
- A. 3ν
- B. (2/3)ν
- C. (3/2)ν
- D. 2ν
Show answer
Answer: C — (3/2)ν
hν = w + eVs/2 ...(i); h(ν/2) = w + eVs ...(ii). Multiply (ii) by 2: hν = 2w + 2eVs. Subtract (i): hν - hν = (2w-w) + (2eVs - eVs/2) is reorganized as: from (i) and (ii), eliminating Vs gives 2hν - hν/2 = 2w - w ⟹ 3hν/2 = w = hνth ⟹ νth = 3ν/2.
- Q7· Gravitation
A body of mass 60g experiences a gravitational force of 3.0N, when placed at a particular point. The magnitude of the gravitational field intensity at that point is:
- A. 50 N/kg
- B. 20 N/kg
- C. 180 N/kg
- D. 0.05 N/kg
Show answer
Answer: A — 50 N/kg
Ig = F/m = 3/(60×10⁻³) = 50 N/kg.
- Q8· Semiconductor Electronics
In half wave rectification, if the input frequency is 60Hz, then the output frequency would be:
- A. 30Hz
- B. 60Hz
- C. 120 Hz
- D. zero
Show answer
Answer: B — 60Hz
In half wave rectification, fin = fout, so fout = 60Hz.
- Q9· Electrostatic Potential and Capacitance
Two hollow conducting spheres of radii R₁ and R₂ (R₁ >> R₂) have equal charges. The potential would be:
- A. more on smaller sphere
- B. equal on both the spheres
- C. dependent on the material property of the sphere
- D. more on bigger sphere
Show answer
Answer: A — more on smaller sphere
V = kQ/R. Since R₁ >> R₂ and charges are equal, V₁ << V₂, so the smaller sphere has more potential.
- Q10· Laws of Motion
A shell of mass m is at rest initially. It explodes into three fragments having equal mass in the ratio 2:2:1. If the fragments having equal mass fly off along mutually perpendicular directions with speed v, the speed of the third (lighter) fragment is:
- A. √2 v
- B. 2√2 v
- C. 3√2 v
- D. v
Show answer
Answer: B — 2√2 v
Net linear momentum after explosion must be zero. The two 2m fragments move perpendicular to each other with speed v each, giving resultant momentum 2√2(mv) at 45° to each. This must be balanced by the m fragment: mv' = 2√2 mv ⟹ v' = 2√2 v.
- Q11· Dual Nature of Radiation and Matter
The graph which shows the variation of the de Broglie wavelength (λ) of a particle and its associated momentum (p) is:
- A. A straight line with negative slope
- B. An increasing curve (concave up, rising)
- C. A hyperbola-like decreasing curve (λ decreasing as p increases, asymptotic to axes)
- D. A straight line with positive slope
Show answer
Answer: C — A hyperbola-like decreasing curve (λ decreasing as p increases, asymptotic to axes)
According to de Broglie, λ = h/p, so λ ∝ 1/p. This relation is a hyperbola, i.e., λ decreases as p increases, asymptotic to both axes.
- Q12· Nuclei
In the given nuclear reaction, the element X is: ²²₁₁Na → X + e⁺ + ν
- A. ²³₁₀Ne
- B. ²²₁₀Ne
- C. ²²₁₂Mg
- D. ²³₁₁Na
Show answer
Answer: B — ²²₁₀Ne
²²₁₁Na → ᴬ_Z X + ₁e⁰ + ν. Charge conservation: 11 = Z+1 ⟹ Z=10. Mass conservation: A=22. So X is ²²₁₀Ne.
- Q13· Alternating Current
A series LCR circuit with inductance 10H, capacitance 10 μF, resistance 50 Ω is connected to an ac source of voltage, V = 200 sin(100t) volt. If the resonant frequency of the LCR circuit is ν₀ and the frequency of the ac source is ν then:
- A. ν₀ = ν = 50/π Hz
- B. ν₀ = 50/π Hz, ν = 50 Hz
- C. ν = 100 Hz, ν₀ = 100/π Hz
- D. ν₀ = ν = 5Hz
Show answer
Answer: A — ν₀ = ν = 50/π Hz
Resonant frequency ν₀ = 1/(2π√LC) = 1/(2π√(10×10⁻⁵)) = 1/(2π×10⁻²) = 100/2π = 50/π Hz. Comparing V=V₀sinωt with ω=100: ν = ω/2π = 100/2π = 50/π Hz. So ν₀ = ν = 50/π Hz.
- Q14· Electrostatic Potential and Capacitance
Two point charges −q and +q are placed at a distance of L, as shown in the figure. The magnitude of electric field intensity at a distance R (R>>L) varies as:
- A. 1/R³
- B. 1/R⁴
- C. 1/R⁶
- D. 1/R²
Show answer
Answer: A — 1/R³
Since R>>L, the charge system acts as an electric dipole. Electric field on the axis of a dipole is E = 2kP/R³, so E ∝ 1/R³.
- Q15· Semiconductor Electronics
A logic circuit takes inputs A and B: A and (NOT A via inverter, combined with B) feed a NAND gate to give AB̄ (bar over AB), and B with (NOT B combined with A via inverter) feed another NAND gate to give ĀB̄ (bar over AB); both outputs feed a final NAND gate to give output C. The truth table for the given logic circuit is:
- A. A B C: 0 0→1, 0 1→0, 1 0→0, 1 1→1
- B. A B C: 0 0→1, 0 1→0, 1 0→1, 1 1→0
- C. A B C: 0 0→0, 0 1→1, 1 0→0, 1 1→1
- D. A B C: 0 0→0, 0 1→1, 1 0→1, 1 1→0
Show answer
Answer: B — A B C: 0 0→1, 0 1→0, 1 0→1, 1 1→0
C = (AB̄)'·(ĀB̄)' = (Ā+B)(A+B̄) = AĀ+AB̄+ĀB̄+BB̄... simplifying gives C = B̄(Ā+1) = B̄. Evaluating: (0,0)→B̄=1; (0,1)→B̄=0; (1,0)→B̄=1; (1,1)→B̄=0. This matches option (2): 1,0,1,0.
- Q16· Units and Measurements
The area of a rectangular field (in m²) of length 55.3m and breadth 25m after rounding off the value for correct significant digits is:
- A. 1382
- B. 1382.5
- C. 14 × 10²
- D. 138 × 10¹
Show answer
Answer: C — 14 × 10²
A = L×B = 55.3×25 = 1382.5. Since the breadth 25 has only 2 significant figures, the answer must also be rounded to 2 significant figures: 1382.5 ≈ 14×10².
- Q17· Electromagnetic Waves
Match List-I with List-II: List-I (Electromagnetic waves): (a) AM radio waves (b) Microwaves (c) Infrared radiations (d) X-rays -- List-II (Wavelength): (i) 10^-10 m (ii) 10^2 m (iii) 10^-2 m (iv) 10^-4 m. Choose the correct answer from the options given below:
- A. a-iv, b-iii, c-ii, d-i
- B. a-iii, b-ii, c-i, d-iv
- C. a-iii, b-iv, c-ii, d-i
- D. a-ii, b-iii, c-iv, d-i
Show answer
Answer: D — a-ii, b-iii, c-iv, d-i
AM radio waves have wavelengths of order 10^2 m, microwaves around 10^-2 m, infrared radiations around 10^-4 m, and X-rays around 10^-10 m. This matches a-ii, b-iii, c-iv, d-i.
- Q18· Thermodynamics
An ideal gas undergoes four different processes from the same initial state, shown in a P-V diagram as curves 1, 2, 3 and 4, with curve 1 being a vertical line (isochoric), and curves 2, 3, 4 being decreasing curves of increasing steepness from the initial point, with curve 4 being nearly horizontal (isobaric). Those processes are adiabatic, isothermal, isobaric and isochoric. The curve which represents the adiabatic process among 1, 2, 3 and 4 is:
- A. 1
- B. 2
- C. 3
- D. 4
Show answer
Answer: B — 2
For the same initial state and same volume change, the adiabatic curve is steeper than the isothermal curve because gamma > 1 for an adiabatic process. Among the given curves, curve 2 (steeper than curve 3, which represents the isothermal process) represents the adiabatic process.
- Q19· System of Particles and Rotational Motion
The angular speed of a fly wheel moving with uniform angular acceleration changes from 1200 rpm to 3120 rpm in 16 seconds. The angular acceleration in rad/s^2 is:
- A. 2*pi
- B. 4*pi
- C. 12*pi
- D. 104*pi
Show answer
Answer: B — 4*pi
omega_i = 1200 rpm = 1200x2pi/60 = 40*pi rad/s. omega_f = 3120 rpm = 3120x2pi/60 = 104*pi rad/s. alpha = (omega_f - omega_i)/t = (104*pi - 40*pi)/16 = 64*pi/16 = 4*pi rad/s^2.
- Q20· Semiconductor Electronics
Three circuits (a), (b), (c) each have two p-n junction diodes connected in series with a battery: (a) both diodes oriented P-N...P-N the same way, (b) first P-N then N-P (reversed), (c) first N-P then N-P (both reversed from a). In the given circuits (a), (b) and (c), the potential drop across the two p-n junctions are equal in:
- A. Circuit (a) only
- B. Circuit (b) only
- C. Circuit (c) only
- D. Both circuits (a) and (c)
Show answer
Answer: D — Both circuits (a) and (c)
In circuits (a) and (c), both diodes are oriented the same way relative to the battery (both forward biased or both reverse biased in series), so they carry the same current and have equal potential drop across each junction. In circuit (b), the diodes are oriented oppositely, so one is forward biased and the other reverse biased, giving unequal drops.
- Q21· Ray Optics and Optical Instruments
A biconvex lens has radii of curvature, 20 cm each. If the refractive index of the material of the lens is 1.5, the power of the lens is:
- A. +2 D
- B. +20 D
- C. +5 D
- D. Infinity
Show answer
Answer: C — +5 D
Using lens maker's formula: 1/f = (mu-1)(1/R1 - 1/R2) = (0.5)(1/20 - (-1/20)) = 0.5 x (2/20) = 0.05 /cm = 5/m. f = 20 cm = 0.2 m. Power P = 1/f = 1/0.2 = 5 D.
- Q22· Dual Nature of Radiation and Matter
The graph which shows the variation of the de Broglie wavelength (lambda) of a particle and its associated momentum (p) is: (four graph options showing linear increasing, linear decreasing, increasing hyperbola, and decreasing hyperbola curves)
- A. Linear increasing graph of lambda vs p
- B. Linear decreasing graph of lambda vs p
- C. Increasing hyperbola/exponential curve of lambda vs p
- D. Decreasing hyperbola curve of lambda vs p, asymptotic to both axes
Show answer
Answer: D — Decreasing hyperbola curve of lambda vs p, asymptotic to both axes
de Broglie wavelength lambda = h/p, which is an inverse relationship. As p increases, lambda decreases following a hyperbolic curve that approaches but never touches either axis, matching option 4.
- Q23· Current Electricity
As the temperature increases, the electrical resistance:
- A. Increases for both conductors and semiconductors
- B. Decreases for both conductors and semiconductors
- C. Increases for conductors but decreases for semiconductors
- D. Decreases for conductors but increases for semiconductors
Show answer
Answer: C — Increases for conductors but decreases for semiconductors
For conductors, resistance increases with temperature due to increased lattice vibrations scattering electrons. For semiconductors, resistance decreases with temperature because more charge carriers become available as electrons gain energy to jump the band gap.
- Q24· Mechanical Properties of Fluids
A spherical ball is dropped in a long column of a highly viscous liquid. Among curves A, B, C, D shown in a v-t graph (where A rises slowly and stays low, B rises and levels off to a constant terminal value, C and D show other increasing/peaking patterns), the curve which represents the speed of the ball (v) as a function of time (t) is:
- A. A
- B. B
- C. C
- D. D
Show answer
Answer: B — B
When a ball falls through a highly viscous liquid, it accelerates initially due to gravity, but as viscous drag force increases with speed, the net force decreases until it reaches zero at terminal velocity, after which speed remains constant. This matches curve B, which rises and then levels off to a constant (terminal) value.
- Q25· Magnetism and Matter
The dimensions [MLT^-2 A^-2] belong to the:
- A. Magnetic flux
- B. Self inductance
- C. Magnetic permeability
- D. Electric permittivity
Show answer
Answer: C — Magnetic permeability
Magnetic permeability (mu0) has dimensional formula [MLT^-2A^-2], derived from the formula for force between two current-carrying wires or from B = mu0*H relationships.
- Q26· Semiconductor Electronics
In half wave rectification, if the input frequency is 60 Hz, then the output frequency would be:
- A. Zero
- B. 30 Hz
- C. 60 Hz
- D. 120 Hz
Show answer
Answer: C — 60 Hz
In half wave rectification, only one half cycle (either positive or negative) of the input AC is allowed to pass per input cycle, so the output frequency equals the input frequency, which is 60 Hz.
- Q27· Waves
If the initial tension on a stretched string is doubled, then the ratio of the initial and final speeds of a transverse wave along the string is:
- A. 1:1
- B. sqrt(2):1
- C. 1:sqrt(2)
- D. 1:2
Show answer
Answer: C — 1:sqrt(2)
Wave speed v = sqrt(T/mu). If T doubles, v_final = sqrt(2)*v_initial. So the ratio of initial to final speed is v_i:v_f = 1:sqrt(2).
- Q28· System of Particles and Rotational Motion
A shell of mass m is at rest initially. It explodes into three fragments having mass in the ratio 2:2:1. If the fragments having equal mass fly off along mutually perpendicular directions with speed v, the speed of the third (lighter) fragment is:
- A. v
- B. sqrt(2)*v
- C. 2*sqrt(2)*v
- D. 3*sqrt(2)*v
Show answer
Answer: C — 2*sqrt(2)*v
The two equal-mass fragments (mass 2m/5 each) have momenta (2m/5)v perpendicular to each other, so their resultant momentum is sqrt(2)*(2m/5)*v. By conservation of momentum (initial momentum zero), the third fragment (mass m/5) must have equal and opposite momentum: (m/5)*v3 = sqrt(2)*(2m/5)*v, giving v3 = 2*sqrt(2)*v.
- Q29· System of Particles and Rotational Motion
Two objects of mass 10 kg and 20 kg respectively are connected to the two ends of a rigid rod of length 10 m with negligible mass. The distance of the center of mass of the system from the 10 kg mass is:
- A. 10/3 m
- B. 20/3 m
- C. 10 m
- D. 5 m
Show answer
Answer: B — 20/3 m
Taking the 10 kg mass as origin, center of mass distance = (m1*0 + m2*L)/(m1+m2) = (20*10)/(10+20) = 200/30 = 20/3 m.
- Q30· Mechanical Properties of Fluids
If a soap bubble expands, the pressure inside the bubble:
- A. Decreases
- B. Increases
- C. Remains the same
- D. Is equal to the atmospheric pressure
Show answer
Answer: A — Decreases
Excess pressure inside a soap bubble is given by P = 4T/r, where T is surface tension and r is the radius. As the bubble expands, r increases, so the excess pressure (and hence the pressure inside) decreases.
- Q31· Work, Energy and Power
An electric lift with a maximum load of 2000 kg (lift + passengers) is moving up with a constant speed of 1.5 m/s. The frictional force opposing the motion is 3000 N. The minimum power delivered by the motor to the lift in watts is: (g = 10 m/s^2)
- A. 23000
- B. 20000
- C. 34500
- D. 23500
Show answer
Answer: C — 34500
Weight = 2000x10 = 20000 N. Total force needed = weight + friction = 20000 + 3000 = 23000 N. Power = Force x velocity = 23000 x 1.5 = 34500 W.
- Q32· Electric Charges and Fields
The angle between the electric lines of force and the equipotential surface is:
- A. 0 degrees
- B. 45 degrees
- C. 90 degrees
- D. 180 degrees
Show answer
Answer: C — 90 degrees
Electric lines of force are always perpendicular to equipotential surfaces because no work is done moving a charge along an equipotential surface, which requires the field (and hence lines of force) to be perpendicular to it.
- Q33· Moving Charges and Magnetism
A long solenoid of radius 1 mm has 100 turns per mm. If 1 A current flows in the solenoid, the magnetic field strength at the centre of the solenoid is:
- A. 6.28 x 10^-2 T
- B. 12.56 x 10^-2 T
- C. 12.56 x 10^-4 T
- D. 6.28 x 10^-4 T
Show answer
Answer: B — 12.56 x 10^-2 T
n = 100 turns/mm = 10^5 turns/m. B = mu0*n*I = 4*pi*10^-7 x 10^5 x 1 = 4*pi*10^-2 = 12.56 x 10^-2 T. (The radius given is not needed for the field at the center of a long solenoid.)
- Q34· Nuclei
In the given nuclear reaction, the element X is: Na-22 (atomic number 11) -> X + e+ + neutrino
- A. Na-23 (atomic number 11)
- B. Ne-23 (atomic number 10)
- C. Ne-22 (atomic number 10)
- D. Mg-22 (atomic number 12)
Show answer
Answer: C — Ne-22 (atomic number 10)
In positron (e+) emission, a proton converts to a neutron, so the atomic number decreases by 1 while mass number stays the same. Na-22 (Z=11) becomes Ne-22 (Z=10).
- Q35· Moving Charges and Magnetism
Given below are two statements: Statement I: Biot-Savart's law gives us the expression for the magnetic field strength of an infinitesimal current element (Idl) of a current carrying conductor only. Statement II: Biot-Savart's law is analogous to Coulomb's inverse square law of charge q, with the former being related to the field produced by a scalar source, Idl while the latter being produced by a vector source, q. In light of the above statements choose the most appropriate answer from the options given below:
- A. Both Statement I and Statement II are correct
- B. Both Statement I and Statement II are incorrect
- C. Statement I is correct and Statement II is incorrect
- D. Statement I is incorrect and Statement II is correct
Show answer
Answer: C — Statement I is correct and Statement II is incorrect
Statement I correctly describes Biot-Savart's law. Statement II is incorrect because it has the nature of the sources reversed: the current element Idl is actually the vector source, while charge q in Coulomb's law is the scalar source, not the other way around as stated.
- Q36· System of Particles and Rotational Motion
The ratio of the radius of gyration of a thin uniform disc about an axis passing through its centre and normal to its plane to the radius of gyration of the disc about its diameter is:
- A. 2:1
- B. sqrt(2):1
- C. 4:1
- D. 1:sqrt(2)
Show answer
Answer: B — sqrt(2):1
For a disc, I_center,perpendicular = MR^2/2, giving k1 = R/sqrt(2). I_diameter = MR^2/4, giving k2 = R/2. Ratio k1:k2 = (R/sqrt2)/(R/2) = 2/sqrt2 = sqrt(2):1.
- Q37· Alternating Current
The peak voltage of the ac source is equal to:
- A. The value of voltage supplied to the circuit
- B. The rms value of the ac source
- C. sqrt(2) times the rms value of the ac source
- D. 1/sqrt(2) times the rms value of the ac source
Show answer
Answer: C — sqrt(2) times the rms value of the ac source
The relation between peak voltage (V0) and rms voltage (Vrms) is V0 = sqrt(2) x Vrms.
- Q38· Electromagnetic Waves
The energy that will be ideally radiated by a 100 kW transmitter in 1 hour is:
- A. 36 x 10^7 J
- B. 36 x 10^4 J
- C. 36 x 10^5 J
- D. 1 x 10^5 J
Show answer
Answer: A — 36 x 10^7 J
Energy = Power x time = 100,000 W x 3600 s = 3.6 x 10^8 J = 36 x 10^7 J.
- Q39· Wave Optics
In a Young's double slit experiment, a student observes 8 fringes in a certain segment of screen when a monochromatic light of 600 nm wavelength is used. If the wavelength of light is changed to 400 nm, then the number of fringes he would observe in the same region of the screen is:
- A. 6
- B. 8
- C. 9
- D. 12
Show answer
Answer: D — 12
Number of fringes in a fixed region is inversely proportional to wavelength (N proportional to 1/lambda) since fringe width is proportional to lambda. N2 = N1 x (lambda1/lambda2) = 8 x (600/400) = 12.
- Q40· Electromagnetic Induction
A square loop of side 1 m and resistance 1 ohm is placed in a magnetic field of 0.5 T. If the plane of loop is perpendicular to the direction of magnetic field, the magnetic flux through the loop is:
- A. 2 weber
- B. 0.5 weber
- C. 1 weber
- D. Zero weber
Show answer
Answer: B — 0.5 weber
Magnetic flux = B x A = 0.5 x (1x1) = 0.5 Wb (since the plane is perpendicular to the field, the area vector is parallel to B).
- Q41· Current Electricity
Two resistors of resistance, 100 ohm and 200 ohm are connected in parallel in an electrical circuit. The ratio of the thermal energy developed in 100 ohm to that in 200 ohm in a given time is:
- A. 1:2
- B. 2:1
- C. 1:4
- D. 4:1
Show answer
Answer: B — 2:1
In parallel, both resistors have the same voltage across them. Power = V^2/R, so power is inversely proportional to resistance. P100:P200 = 200:100 = 2:1.
- Q42· Kinematics
The ratio of the distances travelled by a freely falling body in the 1st, 2nd, 3rd and 4th second is:
- A. 1:2:3:4
- B. 1:4:9:16
- C. 1:3:5:7
- D. 1:1:1:1
Show answer
Answer: C — 1:3:5:7
Distance traveled in the nth second under constant acceleration (starting from rest) follows the pattern of consecutive odd numbers: 1:3:5:7, since distance in nth second = g(2n-1)/2.
- Q43· Gravitation
A body of mass 60 g experiences a gravitational force of 3.0 N, when placed at a particular point. The magnitude of the gravitational field intensity at that point is:
- A. 0.05 N/kg
- B. 50 N/kg
- C. 20 N/kg
- D. 180 N/kg
Show answer
Answer: B — 50 N/kg
Gravitational field intensity g = F/m = 3.0 N / 0.060 kg = 50 N/kg.
- Q44· Ray Optics and Optical Instruments
A light ray falls on a glass surface of refractive index sqrt(3), at an angle 60 degrees. The angle between the refracted and reflected rays would be:
- A. 30 degrees
- B. 60 degrees
- C. 90 degrees
- D. 120 degrees
Show answer
Answer: C — 90 degrees
Using Snell's law: sin60/sin(r) = sqrt(3), so sin(r) = (sqrt3/2)/sqrt3 = 1/2, giving r = 30 degrees. The reflected ray makes 60 degrees with the normal (same as incidence angle) on the incident side, while the refracted ray makes 30 degrees with the normal on the other side. The angle between them is 180 - 60 - 30 = 90 degrees.
- Q45· Electromagnetic Waves
When light propagates through a material medium of relative permittivity epsilon_r and relative permeability mu_r, the velocity of light, v is given by: (c = velocity of light in vacuum)
- A. v = c
- B. v = sqrt(mu_r/epsilon_r)
- C. v = sqrt(epsilon_r/mu_r)
- D. v = c/sqrt(epsilon_r*mu_r)
Show answer
Answer: D — v = c/sqrt(epsilon_r*mu_r)
In a medium, the speed of light is v = 1/sqrt(mu*epsilon) = 1/sqrt(mu0*mu_r*epsilon0*epsilon_r) = c/sqrt(mu_r*epsilon_r), since c = 1/sqrt(mu0*epsilon0).
- Q46· Electric Charges and Fields
Two hollow conducting spheres of radii R1 and R2 (R1 >> R2) have equal charges. The potential would be:
- A. More on bigger sphere
- B. More on smaller sphere
- C. Equal on both the spheres
- D. Dependent on the material property of the sphere
Show answer
Answer: B — More on smaller sphere
Potential of a charged sphere V = kQ/R. For equal charge Q, a smaller radius R2 gives a higher potential since V is inversely proportional to R.
- Q47· Current Electricity
A copper wire of length 10 m and radius (10^-2/sqrt(pi)) m has electrical resistance of 10 ohm. The current density in the wire for an electric field strength of 10 (V/m) is:
- A. 10^4 A/m^2
- B. 10^6 A/m^2
- C. 10^-5 A/m^2
- D. 10^5 A/m^2
Show answer
Answer: D — 10^5 A/m^2
Area = pi*r^2 = pi*(10^-4/pi) = 10^-4 m^2. Resistivity rho = RA/L = (10 x 10^-4)/10 = 10^-4 ohm.m. Current density J = E/rho = 10/10^-4 = 10^5 A/m^2.
- Q48· Kinematics
The displacement-time graphs of two moving particles make angles of 30 degrees and 45 degrees with the x-axis as shown in the figure. The ratio of their respective velocity is:
- A. sqrt(3):1
- B. 1:1
- C. 1:2
- D. 1:sqrt(3)
Show answer
Answer: D — 1:sqrt(3)
Velocity equals the slope of the displacement-time graph, i.e., tan(theta). v1:v2 = tan30:tan45 = (1/sqrt3):1 = 1:sqrt(3).
- Q49· Units and Measurements
Plane angle and solid angle have:
- A. Units but no dimensions
- B. Dimensions but no units
- C. No units and no dimensions
- D. Both units and dimensions
Show answer
Answer: A — Units but no dimensions
Plane angle (radian) and solid angle (steradian) are dimensionless quantities (ratios of lengths or areas), so they have no dimensions, but they do have units (radian and steradian respectively).
- Q50· Atoms
Let T1 and T2 be the energy of an electron in the first and second excited states of hydrogen atoms, respectively. According to the Bohr's model of an atom, the ratio T1:T2 is:
- A. 1:4
- B. 4:1
- C. 4:9
- D. 9:4
Show answer
Answer: D — 9:4
Energy in nth state E_n = -13.6/n^2 eV. First excited state is n=2, second excited state is n=3. T1:T2 = (1/4):(1/9) = 9:4.
- Q51· Gravitation
Match List-I with List-II: List-I: (a) Gravitational constant (G) (b) Gravitational potential energy (c) Gravitational potential (d) Gravitational intensity -- List-II: (i) [L^2T^-2] (ii) [M^-1L^3T^-2] (iii) [LT^-2] (iv) [ML^2T^-2]. Choose the correct answer from the options given below:
- A. a-ii, b-i, c-iv, d-iii
- B. a-ii, b-iv, c-i, d-iii
- C. a-ii, b-iv, c-iii, d-i
- D. a-iv, b-ii, c-i, d-iii
Show answer
Answer: B — a-ii, b-iv, c-i, d-iii
G has dimensional formula [M^-1L^3T^-2] (ii). Gravitational PE has formula [ML^2T^-2] (iv). Gravitational potential (PE per unit mass) has formula [L^2T^-2] (i). Gravitational intensity (force per unit mass) has formula [LT^-2] (iii). So a-ii, b-iv, c-i, d-iii.
- Q52· Oscillations
Two pendulums of length 121 cm and 100 cm start vibrating in phase. At some instant, the two are at their mean position in the same phase. The minimum number of vibrations of the shorter pendulum after which the two are again in phase at the mean position is:
- A. 11
- B. 9
- C. 10
- D. 8
Show answer
Answer: A — 11
T is proportional to sqrt(L). T1/T2 = sqrt(121/100) = 11/10. They are back in phase when n2*T2 = n1*T1, i.e., n2/n1 = T1/T2 = 11/10. The minimum integers satisfying this are n2(shorter pendulum, faster)=11, n1(longer)=10.
- Q53· Units and Measurements
The area of a rectangular field (in m^2) of length 55.3 m and breadth 25 m after rounding off the value for correct significant digits is:
- A. 138 x 10^1
- B. 1382
- C. 1382.5
- D. 14 x 10^2
Show answer
Answer: D — 14 x 10^2
Raw product = 55.3 x 25 = 1382.5. Since 25 has only 2 significant figures, the final answer must be rounded to 2 significant figures: 1400 = 14 x 10^2.
- Q54· Kinematics
A ball is projected with a velocity, 10 m/s, at an angle of 60 degrees with the vertical direction. Its speed at the highest point of its trajectory will be:
- A. Zero
- B. 5*sqrt(3) m/s
- C. 5 m/s
- D. 10 m/s
Show answer
Answer: B — 5*sqrt(3) m/s
Angle with vertical is 60 degrees, so angle with horizontal is 30 degrees. At the highest point, only the horizontal component of velocity remains: vx = 10*cos(30) = 10*(sqrt3/2) = 5*sqrt(3) m/s. (Equivalently, using angle with vertical, horizontal component = 10*sin(60) = 5*sqrt3 m/s.)
- Q55· Semiconductor Electronics
A logic circuit has inputs A and B, with A going through a NOT gate, and combinations through two NAND gates feeding into a final AND gate producing output C. The truth table for the given logic circuit is: (four options showing different A,B,C truth table combinations for inputs 00,01,10,11)
- A. C = 0,1,1,0 for AB = 00,01,10,11
- B. C = 1,0,0,1 for AB = 00,01,10,11
- C. C = 1,0,1,0 for AB = 00,01,10,11
- D. C = 0,1,0,1 for AB = 00,01,10,11
Show answer
Answer: C — C = 1,0,1,0 for AB = 00,01,10,11
Tracing through the given combination of NOT, NAND and AND gates for each input combination (00, 01, 10, 11) yields output C values of 1, 0, 1, 0 respectively, matching option 3.
- Q56· Moving Charges and Magnetism
From Ampere's circuital law for a long straight wire of circular cross-section carrying a steady current, the variation of magnetic field in the inside and outside region of the wire is:
- A. Uniform and remains constant for both the regions.
- B. A linearly increasing function of distance upto the boundary of the wire and then linearly decreasing for the outside region.
- C. A linearly increasing function of distance r upto the boundary of the wire and then decreasing one with 1/r dependence for the outside region.
- D. A linearly decreasing function of distance upto the boundary of the wire and then a linearly increasing one for the outside region.
Show answer
Answer: C — A linearly increasing function of distance r upto the boundary of the wire and then decreasing one with 1/r dependence for the outside region.
Inside the wire, B is proportional to r (distance from axis) since enclosed current grows with area (r^2) and B = mu0*I_enclosed/(2*pi*r). Outside the wire, B is proportional to 1/r, as for an infinite line current.
- Q57· Alternating Current
A series LCR circuit with inductance 10 H, capacitance 10 microF, resistance 50 ohm is connected to an ac source of voltage, V = 200sin(100t) volt. If the resonant frequency of the LCR circuit is v0 and the frequency of the ac source is v, then:
- A. v0 = v = 50 Hz
- B. v0 = v = 50/pi Hz
- C. v0 = 50/pi Hz, v = 50 Hz
- D. v = 100 Hz; v0 = 100/pi Hz
Show answer
Answer: B — v0 = v = 50/pi Hz
Resonant angular frequency omega0 = 1/sqrt(LC) = 1/sqrt(10 x 10x10^-6) = 1/sqrt(10^-4) = 100 rad/s, so v0 = 100/(2*pi) = 50/pi Hz. From V=200sin(100t), omega=100 rad/s, so v = 100/(2*pi) = 50/pi Hz. Hence v0 = v = 50/pi Hz.
- Q58· Electric Charges and Fields
Two point charges -q and +q are placed at a distance of L, as shown in the figure. The magnitude of electric field intensity at a distance R (R>>L) varies as:
- A. 1/R^2
- B. 1/R^3
- C. 1/R^4
- D. 1/R^6
Show answer
Answer: B — 1/R^3
The two charges form an electric dipole. At large distances (R>>L) from a dipole, the electric field intensity falls off as 1/R^3, unlike a single point charge which falls off as 1/R^2.
- Q59· Mechanical Properties of Solids
Given below are two statements: One is labelled as Assertion (A) and the other is labelled as Reason (R). Assertion (A): The stretching of a spring is determined by the shear modulus of the material of the spring. Reason (R): A coil spring of copper has more tensile strength than a steel spring of same dimensions. In the light of the above statements, choose the most appropriate answer from the options given below:
- A. Both (A) and (R) are true and (R) is the correct explanation of (A)
- B. Both (A) and (R) are true and (R) is not the correct explanation of (A)
- C. (A) is true but (R) is false
- D. (A) is false but (R) is true
Show answer
Answer: C — (A) is true but (R) is false
The stretching/twisting behavior of a coil spring is indeed governed by the shear modulus of its material, making Assertion (A) true. However, steel has greater tensile strength than copper of the same dimensions, making Reason (R) false.
- Q60· Electromagnetic Induction
A big circular coil of 1000 turns and average radius 10 m is rotating about its horizontal diameter at 2 rad/s. If the vertical component of earth's magnetic field at that place is 2 x 10^-5 T and electrical resistance of the coil is 12.56 ohm, then the maximum induced current in the coil will be:
- A. 0.25 A
- B. 1.5 A
- C. 1 A
- D. 2 A
Show answer
Answer: C — 1 A
EMF_max = N*B*A*omega. A = pi*r^2 = pi*100 = 100*pi m^2. EMF_max = 1000 x 2x10^-5 x 100*pi x 2 = 4*pi = 12.56 V. I_max = EMF_max/R = 12.56/12.56 = 1 A.
- Q61· Kinetic Theory
The volume occupied by the molecules contained in 4.5 kg water at STP, if the intermolecular forces vanish away is:
- A. 5.6 x 10^6 m^3
- B. 5.6 x 10^3 m^3
- C. 5.6 x 10^-3 m^3
- D. 5.6 m^3
Show answer
Answer: D — 5.6 m^3
Moles of water = 4500 g / 18 g/mol = 250 mol. If intermolecular forces vanish, water molecules would behave as an ideal gas at STP, occupying volume = 250 mol x 22.4 L/mol = 5600 L = 5.6 m^3.
- Q62· Electric Charges and Fields
A capacitor of capacitance C = 900 pF is charged fully by 100 V battery B as shown in figure (a). Then it is disconnected from the battery and connected to another uncharged capacitor of capacitance C = 900 pF as shown in figure (b). The electrostatic energy stored by the system (b) is:
- A. 4.5 x 10^-6 J
- B. 3.25 x 10^-6 J
- C. 2.25 x 10^-6 J
- D. 1.5 x 10^-6 J
Show answer
Answer: C — 2.25 x 10^-6 J
Initial charge Q = CV = 900x10^-12 x 100 = 9x10^-8 C. When connected to an identical uncharged capacitor, charge redistributes equally, with total capacitance 1800 pF. Common voltage V' = Q/C_total = 9x10^-8/1800x10^-12 = 50 V. Energy = (1/2)*C_total*V'^2 = 0.5 x 1800x10^-12 x 2500 = 2.25x10^-6 J.
- Q63· Current Electricity
A wheatstone bridge is used to determine the value of unknown resistance X by adjusting the variable resistance Y as shown in the figure. For the most precise measurement of X, the resistances P and Q:
- A. should be approximately equal to 2X
- B. should be approximately equal and are small
- C. should be very large and unequal
- D. do not play any significant role
Show answer
Answer: B — should be approximately equal and are small
For maximum sensitivity and precision in a Wheatstone bridge, the resistances P and Q should be approximately equal to each other (and to X and Y) and relatively small, to minimize measurement error from galvanometer sensitivity.
- Q64· Ray Optics and Optical Instruments
Two transparent media A and B are separated by a plane boundary. The speed of light in those media are 1.5 x 10^8 m/s and 2.0 x 10^8 m/s, respectively. The critical angle for a ray of light for these two media is:
- A. sin^-1(0.500)
- B. sin^-1(0.750)
- C. tan^-1(0.500)
- D. tan^-1(0.750)
Show answer
Answer: B — sin^-1(0.750)
Light travels from the denser medium A (slower, v=1.5x10^8) to the rarer medium B (faster, v=2.0x10^8) for total internal reflection. sin(critical angle) = v1/v2 = 1.5/2.0 = 0.75, so critical angle = sin^-1(0.750).
- Q65· Nuclei
A nucleus of mass number 189 splits into two nuclei having mass number 125 and 64. The ratio of radius of two daughter nuclei respectively is:
- A. 1:1
- B. 4:5
- C. 5:4
- D. 25:16
Show answer
Answer: C — 5:4
Nuclear radius R is proportional to A^(1/3). Ratio = 125^(1/3) : 64^(1/3) = 5:4.
- Q66· Thermodynamics
An ideal gas undergoes four different processes from the same initial state as shown in the figure below. Those processes are adiabatic, isothermal, isobaric and isochoric. The curve which represents the adiabatic process among 1, 2, 3 and 4 is (P-V diagram with curve 1 vertical, curves 2,3 decreasing from same point, curve 4 horizontal at top).
- A. 1
- B. 2
- C. 3
- D. 4
Show answer
Answer: B — 2
For curves starting from the same point on a P-V diagram, the adiabatic curve is steeper than the isothermal curve. Curve 2 is the adiabatic process.
- Q67· System of Particles and Rotational Motion
The angular speed of a fly wheel moving with uniform angular acceleration changes from 1200 rpm to 3120 rpm in 16 seconds. The angular acceleration in rad/s² is
- A. 2π
- B. 4π
- C. 12π
- D. 104π
Show answer
Answer: B — 4π
ω1 = 1200×2π/60 = 40π rad/s, ω2 = 3120×2π/60 = 104π rad/s. α = (104π-40π)/16 = 64π/16 = 4π rad/s².
- Q68· Semiconductor Electronics
In the given circuits (a), (b) and (c), two PN junction diodes are connected in series with a battery in different orientations: (a) P-N, P-N both same orientation; (b) P-N, N-P opposite; (c) N-P, N-P both same orientation. In the given circuits (a), (b) and (c), the potential drop across the two p-n junctions are equal in
- A. Circuit (a) only
- B. Circuit (b) only
- C. Circuit (c) only
- D. Both circuits (a) and (c)
Show answer
Answer: D — Both circuits (a) and (c)
In circuits (a) and (c), both diodes are oriented identically (same direction), so both are either both forward or both reverse biased, giving equal potential drop across each junction.
- Q69· Dual Nature of Radiation and Matter
The graph which shows the variation of the de Broglie wavelength (λ) of a particle and its associated momentum (p) is
- A. λ vs p: straight line increasing
- B. λ vs p: straight line decreasing
- C. λ vs p: increasing curve (hyperbola-like rising)
- D. λ vs p: decreasing curve (hyperbola, λ=h/p)
Show answer
Answer: D — λ vs p: decreasing curve (hyperbola, λ=h/p)
λ = h/p, so λ is inversely proportional to p — a decreasing hyperbolic curve as shown in option (4).
- Q70· Mechanical Properties of Fluids
A spherical ball is dropped in a long column of a highly viscous liquid. The curve in the graph shown (v vs t, with curves A, B, C, D), which represents the speed of the ball (v) as a function of time (t) is
- A. A
- B. B
- C. C
- D. D
Show answer
Answer: B — B
The ball accelerates initially and then reaches terminal velocity, asymptotically approaching a constant value — represented by curve B.
- Q71· Units and Measurements
The dimensions [MLT⁻²A⁻²] belong to the
- A. Magnetic flux
- B. Self inductance
- C. Magnetic permeability
- D. Electric permittivity
Show answer
Answer: C — Magnetic permeability
Magnetic permeability μ₀ has dimensional formula [MLT⁻²A⁻²].
- Q72· Waves
If the initial tension on a stretched string is doubled, then the ratio of the initial and final speeds of a transverse wave along the string is
- A. 1 : 1
- B. √2 : 1
- C. 1 : √2
- D. 1 : 2
Show answer
Answer: C — 1 : √2
v ∝ √T. If T doubles, v_final = √2 × v_initial, so v_initial : v_final = 1 : √2.
- Q73· Laws of Motion
A shell of mass m is at rest initially. It explodes into three fragments having mass in the ratio 2 : 2 : 1. If the fragments having equal mass fly off along mutually perpendicular directions with speed v, the speed of the third (lighter) fragment is
- A. v
- B. √2v
- C. 2√2v
- D. 3√2v
Show answer
Answer: C — 2√2v
Two fragments of mass 2m/5 each move perpendicular with speed v; resultant momentum = √2×(2m/5)v. This equals (m/5)×v3, so v3 = 2√2 v.
- Q74· Electric Charges and Fields
The angle between the electric lines of force and the equipotential surface is
- A. 0°
- B. 45°
- C. 90°
- D. 180°
Show answer
Answer: C — 90°
Electric field lines are always perpendicular (90°) to equipotential surfaces.
- Q75· Dual Nature of Radiation and Matter
When two monochromatic lights of frequency, v and v/2 are incident on a photoelectric metal, their stopping potential becomes Vs/2 and Vs respectively. The threshold frequency for this metal is
- A. 2v
- B. 3v
- C. (2/3)v
- D. (3/2)v
Show answer
Answer: D — (3/2)v
Using eVs/2 = hv - hv0 and eVs = h(v/2) - hv0. Solving these two equations gives threshold frequency v0 = (3/2)v.
- Q76· Magnetism and Matter
A long solenoid of radius 1 mm has 100 turns per mm. If 1 A current flows in the solenoid, the magnetic field strength at the centre of the solenoid is
- A. 6.28 × 10⁻² T
- B. 12.56 × 10⁻² T
- C. 12.56 × 10⁻⁴ T
- D. 6.28 × 10⁻⁴ T
Show answer
Answer: B — 12.56 × 10⁻² T
n = 100 turns/mm = 10⁵ turns/m. B = μ0nI = 4π×10⁻⁷×10⁵×1 = 12.56×10⁻² T.
- Q77· Nuclei
In the given nuclear reaction, the element X is: ²²₁₁Na → X + e⁺ + v
- A. ²³₁₁Na
- B. ²³₁₀Ne
- C. ²²₁₀Ne
- D. ²²₁₂Mg
Show answer
Answer: C — ²²₁₀Ne
In positron (β⁺) decay, atomic number decreases by 1, mass number unchanged: ²²₁₁Na → ²²₁₀Ne + e⁺ + v.
- Q78· System of Particles and Rotational Motion
The ratio of the radius of gyration of a thin uniform disc about an axis passing through its centre and normal to its plane to the radius of gyration of the disc about its diameter is
- A. 2 : 1
- B. √2 : 1
- C. 4 : 1
- D. 1 : √2
Show answer
Answer: B — √2 : 1
K(normal axis) = R/√2, K(diameter) = R/2. Ratio = (R/√2)/(R/2) = 2/√2 = √2 : 1.
- Q79· Alternating Current
The peak voltage of the ac source is equal to
- A. The value of voltage supplied to the circuit
- B. The rms value of the ac source
- C. √2 times the rms value of the ac source
- D. 1/√2 times the rms value of the ac source
Show answer
Answer: C — √2 times the rms value of the ac source
V0 = √2 × Vrms.
- Q80· Communication Systems
The energy that will be ideally radiated by a 100 kW transmitter in 1 hour is
- A. 36 × 10⁷ J
- B. 36 × 10⁴ J
- C. 36 × 10⁵ J
- D. 1 × 10⁵ J
Show answer
Answer: A — 36 × 10⁷ J
E = P×t = 100×10³ W × 3600 s = 3.6×10⁸ = 36×10⁷ J.
- Q81· Electromagnetic Induction
A square loop of side 1 m and resistance 1 Ω is placed in a magnetic field of 0.5 T. If the plane of loop is perpendicular to the direction of magnetic field, the magnetic flux through the loop is
- A. 2 weber
- B. 0.5 weber
- C. 1 weber
- D. Zero weber
Show answer
Answer: B — 0.5 weber
Φ = B×A = 0.5×(1×1) = 0.5 weber.
- Q82· Current Electricity
Two resistors of resistance, 100 Ω and 200 Ω are connected in parallel in an electrical circuit. The ratio of the thermal energy developed in 100 Ω to that in 200 Ω in a given time is
- A. 1 : 2
- B. 2 : 1
- C. 1 : 4
- D. 4 : 1
Show answer
Answer: B — 2 : 1
In parallel, voltage is same, so H ∝ 1/R. H1/H2 = R2/R1 = 200/100 = 2:1.
- Q83· Kinematics
The ratio of the distances travelled by a freely falling body in the 1st, 2nd, 3rd and 4th second
- A. 1 : 2 : 3 : 4
- B. 1 : 4 : 9 : 16
- C. 1 : 3 : 5 : 7
- D. 1 : 1 : 1 : 1
Show answer
Answer: C — 1 : 3 : 5 : 7
Distance in nth second ∝ (2n-1), so ratio for n=1,2,3,4 is 1:3:5:7.
- Q84· Ray Optics and Optical Instruments
A light ray falls on a glass surface of refractive index √3, at an angle 60°. The angle between the refracted and reflected rays would be
- A. 30°
- B. 60°
- C. 90°
- D. 120°
Show answer
Answer: C — 90°
By Brewster's law, since tan(60°) = √3 = μ, this is the Brewster angle, so reflected and refracted rays are perpendicular to each other: 90°.
- Q85· Electromagnetic Waves
When light propagates through a material medium of relative permittivity εr and relative permeability μr, the velocity of light, v is given by (c-velocity of light in vacuum)
- A. v = c
- B. v = √(μr/εr)
- C. v = √(εr/μr)
- D. v = c/√(εrμr)
Show answer
Answer: D — v = c/√(εrμr)
v = 1/√(με) = c/√(εrμr).
- Q86· Current Electricity
A copper wire of length 10 m and radius (10⁻²/√π) m has electrical resistance of 10 Ω. The current density in the wire for an electric field strength of 10 (V/m) is
- A. 10⁴ A/m²
- B. 10⁶ A/m²
- C. 10⁻⁵ A/m²
- D. 10⁵ A/m²
Show answer
Answer: D — 10⁵ A/m²
E = 10 V/m, length = 10 m, so V = E×L = 100 V. I = V/R = 100/10 = 10 A. Area = π r² = π×(10⁻²/√π)² = 10⁻⁴ m². J = I/A = 10/10⁻⁴ = 10⁵ A/m².
- Q87· Kinematics
The displacement-time graphs of two moving particles make angles of 30° and 45° with the x-axis as shown in the figure. The ratio of their respective velocity is
- A. √3 : 1
- B. 1 : 1
- C. 1 : 2
- D. 1 : √3
Show answer
Answer: D — 1 : √3
v1 = tan(30°) = 1/√3, v2 = tan(45°) = 1. Ratio v1:v2 = (1/√3):1 = 1:√3.
- Q88· Units and Measurements
The area of a rectangular field (in m²) of length 55.3 m and breadth 25 m after rounding off the value for correct significant digits is
- A. 138 × 10¹
- B. 1382
- C. 1382.5
- D. 14 × 10²
Show answer
Answer: D — 14 × 10²
55.3×25 = 1382.5, but breadth has only 2 significant figures, so answer rounds to 2 sig figs: 14×10².
- Q89· Kinematics
A ball is projected with a velocity, 10 ms⁻¹, at an angle of 60° with the vertical direction. Its speed at the highest point of its trajectory will be
- A. Zero
- B. 5√3 ms⁻¹
- C. 5 ms⁻¹
- D. 10 ms⁻¹
Show answer
Answer: B — 5√3 ms⁻¹
Angle with vertical = 60°, so angle with horizontal = 30°. At highest point, speed = horizontal component = u·cos(30°) = 10×(√3/2) = 5√3 ms⁻¹.
- Q90· Semiconductor Electronics
Given a logic circuit with NAND gates and a NOT gate as shown in the figure, with inputs A and B producing output C. The truth table for the given logic circuit is
- A. A B C: 00→0, 01→1, 10→1, 11→0
- B. A B C: 00→1, 01→0, 10→0, 11→1
- C. A B C: 00→1, 01→0, 10→1, 11→0
- D. A B C: 00→0, 01→1, 10→0, 11→1
Show answer
Answer: C — A B C: 00→1, 01→0, 10→1, 11→0
Analyzing the given combination of NAND and NOT gates (this circuit corresponds to an XNOR-type function), the correct truth table is: 00→1, 01→0, 10→1, 11→0.
- Q91· Alternating Current
A series LCR circuit with inductance 10 H, capacitance 10 μF, resistance 50 Ω is connected to an ac source of voltage, V = 200sin(100t) volt. If the resonant frequency of the LCR circuit is v1 and the frequency of the ac source is v, then
- A. v0 = v = 50 Hz
- B. v0 = v = 50/π Hz
- C. v0 = 50/π Hz, v = 50 Hz
- D. v = 100 Hz; v0 = 100/π Hz
Show answer
Answer: B — v0 = v = 50/π Hz
ω0 = 1/√(LC) = 1/√(10×10×10⁻⁶) = 100 rad/s, so v0 = 100/(2π) = 50/π Hz. From V=200sin(100t), ω=100, v=100/(2π)=50/π Hz. So v0 = v = 50/π Hz.
- Q92· Electric Charges and Fields
Two point charges −q and +q are placed at a distance of L, as shown in the figure. The magnitude of the electric field intensity at a distance R(R>>L) varies as:
- A. 1/R²
- B. 1/R³
- C. 1/R⁴
- D. 1/R⁶
Show answer
Answer: B — 1/R³
For an electric dipole, the field at large distance varies as 1/R³.
- Q93· Kinetic Theory
The volume occupied by the molecules contained in 4.5 kg water at STP, if the intermolecular forces vanish away is
- A. 5.6 × 10⁶ m³
- B. 5.6 × 10³ m³
- C. 5.6 × 10⁻³ m³
- D. 5.6 m³
Show answer
Answer: D — 5.6 m³
4.5 kg water = 4500 g = 250 moles. At STP as ideal gas, V = 250×22.4 L = 5600 L = 5.6 m³.
- Q94· Electric Charges and Fields
A capacitor of capacitance C = 900 pF is charged fully by 100 V battery B as shown in figure (a). Then it is disconnected from the battery and connected to another uncharged capacitor of capacitance C = 900 pF as shown in figure (b). The electrostatic energy stored by the system (b) is
- A. 4.5 × 10⁻⁶ J
- B. 3.25 × 10⁻⁶ J
- C. 2.25 × 10⁻⁶ J
- D. 1.5 × 10⁻⁶ J
Show answer
Answer: C — 2.25 × 10⁻⁶ J
Initial charge Q = CV = 900×10⁻¹²×100 = 9×10⁻⁸ C. When connected to identical uncharged capacitor, charge redistributes equally, each gets Q/2, common V' = 50 V. Energy = (1/2)(2C)(V'²) = C×V'² = 900×10⁻¹²×2500 = 2.25×10⁻⁶ J.
- Q95· Ray Optics and Optical Instruments
Two transparent media A and B are separated by a plane boundary. The speed of light in those media are 1.5 × 10⁸ m/s and 2.0 × 10⁸ m/s, respectively. The critical angle for a ray of light for these two media is
- A. sin⁻¹(0.500)
- B. sin⁻¹(0.750)
- C. tan⁻¹(0.500)
- D. tan⁻¹(0.750)
Show answer
Answer: B — sin⁻¹(0.750)
μ(A to B) relative = vA/vB... Using sin(C) = v2/v1 (going from slower to faster medium A to B) = 1.5/2.0 = 0.75, C = sin⁻¹(0.750).
Take NEET-style timed mocks with your rank
Full 720-mark mocks, NEET 2022 PYQs and instant analysis. Free for 30 days, no card.
Compare NEET course plans for every class.
Take NEET-style timed mocks with your rank
Full 720-mark mocks, NEET 2022 PYQs and instant analysis. Free for 30 days, no card.
Compare NEET course plans for every class.
Take NEET-style timed mocks with your rank
Full 720-mark mocks, NEET 2022 PYQs and instant analysis. Free for 30 days, no card.
Compare NEET course plans for every class.
Take NEET-style timed mocks with your rank
Full 720-mark mocks, NEET 2022 PYQs and instant analysis. Free for 30 days, no card.
Compare NEET course plans for every class.
Take NEET-style timed mocks with your rank
Full 720-mark mocks, NEET 2022 PYQs and instant analysis. Free for 30 days, no card.
Compare NEET course plans for every class.
Take NEET-style timed mocks with your rank
Full 720-mark mocks, NEET 2022 PYQs and instant analysis. Free for 30 days, no card.
Compare NEET course plans for every class.
Take NEET-style timed mocks with your rank
Full 720-mark mocks, NEET 2022 PYQs and instant analysis. Free for 30 days, no card.
Compare NEET course plans for every class.
More free practice: chapter-wise PYQs · NEET Question of the Day · Readiness Test